Please wait a minute...
工程设计学报  2014, Vol. 21 Issue (5): 432-438    DOI: 10.3785/j.issn. 1006-754X.2014.05.005
建模、分析、优化和决策     
基于有限元法的柔性铰链力学模型和性能分析
胡俊峰,郝亚洲,徐贵阳
江西理工大学 机电工程学院,江西 赣州 341000
Mechanical model and performance analysis of a flexure hinge based on the finite element method
HU Jun-feng, HAO Ya-zhou, XU Gui-yang
School of Mechanical & Electrical Engineering, Jiangxi University of Science and Technology, Ganzhou 341000, China
 全文: PDF(1535 KB)   HTML
摘要: 为了精确描述柔性铰链力学性能,提出一种通用的基于有限元法的力学模型,并基于该模型分析其静态和动态性能.柔性铰链采用欧拉伯努利梁模拟其力学行为,将其划分为3个三自由度的结点、2个变截面单元.采用最小势能原理建立与柔性铰链结构参数相关的封闭形式刚度矩阵,采用拉格郎日方程建立铰链的质量矩阵和动力学方程.为了验证所推导的力学模型的精确性,与ANSYS分析结果进行比较分析,两者的结果差值在1.1%~5.6%范围之内,说明理论模型与ANSYS分析结果吻合,所建立的模型能精确反映其静态和动态性能.基于柔性铰链有限元模型,可精确分析铰链参数与其精度和固有频率的关系、应力分布和频率响应,为正圆型柔性铰链应用于柔顺机构设计提供了一种精确的力学模型.
关键词: 柔性铰链 有限元法 力学性能 欧拉-伯努利梁    
Abstract: In order to accurately describe the mechanical properties of a flexure hinge, a general mechanical model based on finite element method is proposed, and the static and dynamic performance analysis is carried out according to the propose model. Euler-Bernoulli beam was adopted to simulate the mechanical behavior of the flexure hinge, and it was divided into three nodes with three degrees of freedom and two elements with variable crosssection. A closed stiffness matrix related to the structural parameters of the flexure hinge was established by using the principle of minimizing potential energy, and the mass matrix and dynamics equations were built by employing Lagrange equation. In order to validate the precision of the proposed mechanical model, the analysis results by ANSYS was compared and got the difference range from 1.1% to 5.6%, which showed that the theoretical model was close to ANSYS and the proposed model could accurately illustrate the static and dynamic properties. The finite element model of the flexure hinge can be applied accurately to analyze the relationship between its accuracy and natural frequency and structural parameters, stress distributions and frequency response. Therefore, a precise mechanical model of the circular flexure hinge is provided for the design of compliant mechanisms.
Key words: flexure hinge    fintite element method    mechanical property    Euler-Bernoulli beam
收稿日期: 2014-05-19 出版日期: 2014-10-28
基金资助:

国家自然科学基金资助项目(51265016);江西省自然科学基金资助项目(20122BAB216029);江西省教育厅科技项目(GJJ12358)

作者简介: 胡俊峰(1978—),男,江西临川人,副教授,博士,从事柔顺机构及机械动力学研究,E-mail: hjfsuper@126.com.
服务  
把本文推荐给朋友
加入引用管理器
E-mail Alert
RSS
作者相关文章  

引用本文:

胡俊峰,郝亚洲,徐贵阳. 基于有限元法的柔性铰链力学模型和性能分析[J]. 工程设计学报, 2014, 21(5): 432-438.

HU Jun-feng, HAO Ya-zhou, XU Gui-yang. Mechanical model and performance analysis of a flexure hinge based on the finite element method. Chinese Journal of Engineering Design, 2014, 21(5): 432-438.

链接本文:

https://www.zjujournals.com/gcsjxb/CN/10.3785/j.issn. 1006-754X.2014.05.005        https://www.zjujournals.com/gcsjxb/CN/Y2014/V21/I5/432

[1] 刘政,王兵振,何改云,张原飞,程绪宇. 极区集成式光伏供电装置结构设计与分析[J]. 工程设计学报, 2022, 29(4): 493-499.
[2] 郑明军, 赵晨磊, 吴文江, 杨摄. 全地形移动机器人车身结构分析与优化[J]. 工程设计学报, 2021, 28(2): 195-202.
[3] 黄维, 刘惟伊, 刘志恩, 卢炽华. 基于多目标遗传算法的实验目标车底盘结构优化[J]. 工程设计学报, 2021, 28(1): 80-88.
[4] 白杨溪, 陈洪月, 陈洪岩, 王鑫. 多约束条件下采煤机摇臂横向振动分析及试验验证[J]. 工程设计学报, 2020, 27(6): 707-712.
[5] 李玄, 周双武, 路松, 丁冰晓. 基于二级杠杆机构的二自由度微定位平台设计与分析[J]. 工程设计学报, 2020, 27(4): 533-540.
[6] 潘益明, 于兰峰, 韩露男, 单逸峰. 移动式架车机伸缩托头-托架接触的有限元分析[J]. 工程设计学报, 2019, 26(3): 315-320.
[7] 唐华平, 曾理, 王胜泽, 陈昊森. 基于拓扑优化的重型矿用自卸车翻车保护结构设计[J]. 工程设计学报, 2018, 25(3): 295-301.
[8] 邓星, 于兰峰, 雷聪, 徐江平, 肖泽平. 无轨伸缩式门式起重机接触部位的有限元分析[J]. 工程设计学报, 2018, 25(1): 79-84,93.
[9] 黄志强, 彭珣, 李刚. 可控震源振动器平板多频响应分析[J]. 工程设计学报, 2017, 24(6): 648-654.
[10] 任利辉, 焦永树, 齐德瑄. 双层黏土中自升式平台桩靴极限承载力数值分析[J]. 工程设计学报, 2017, 24(4): 425-432.
[11] 骆燕燕, 杨静宇, 任永隆, 张元磊, 李文君. 电连接器接触件插拔特性仿真与试验研究[J]. 工程设计学报, 2017, 24(2): 168-173,195.
[12] 刘凯, 曹毅, 周睿, 丁锐, 葛姝翌. 抗压内LET柔性铰链的建模及分析[J]. 工程设计学报, 2016, 23(6): 585-591.
[13] 胡俊峰,郝亚洲,郑昌虎. 减小温度效应的精密微操作平台稳健优化设计[J]. 工程设计学报, 2015, 22(6): 581-588.
[14] 胡俊峰,郝亚洲,徐贵阳,杨 健. 考虑温度效应的微操作平台的建模与性能分析[J]. 工程设计学报, 2015, 22(2): 143-154.
[15] 安静,吴一辉. 姿控飞轮电控系统共模辐射分析与抑制[J]. 工程设计学报, 2014, 21(3): 240-244.