Please wait a minute...
工程设计学报  2002, Vol. 9 Issue (5): 275-278    
工程设计理论、方法与技术     
振动台在无限流体域中台面附加质量研究
 吴昌聚, 沈润杰, 何闻, 贾叔仕
浙江大学生产工程研究所,浙江杭州 310027
Research on additional mass when vibration table vibrates in infinite liquid
 WU  Chang-Ju, SHEN  Run-Jie, HE  Wen, JIA  Shu-Shi
Institute of Production Engineering,Zhejiang University,Hangzhou 310027,China
 全文: PDF  HTML
摘要: 船舰外壳装有声纳传感器用来接收来自水下的声纳信号,船体的振动必然会对声纳传感器的工作产生影响,因此有必要设计水下振动台来模拟水中船体的振动,然后在振动台的台面上安装传感器来进行模拟研究.设计一个工作台面在水体中的振动台,必须考虑水介质对台面的附加影响,这对振动台所需的推力设计、台面几何形状设计等是十分重要的.从振动台台面流固耦合运动方程出发,通过有限元方法,分别计算了台面在空气中和水下振动的加速度谐响应.通过比较台面上不同部位上几个关键结点耦合前后平均加速度值的变化,计算出了各个频率下的附加质量,并对附加质量给振动台设计带来的影响进行了研究.
关键词: 振动台附加质量流固耦合谐响应分析    
Abstract: Sonar sensors are fixed on the crust of galley to receive sonar signals from underwater and the vibration of galley itself must have influenced on them.So it is necessary to design a under-water vibration table to sim ulate the vibration of galley,and sensors are fixed on the board to simulate the fact. To design a vibration table w hose board is under water,the additional mass must be taken into account,which is very significant to affect the design of the thrust of the vibration table and shape of table board.Solid—fluid coupling equation is put forward firstly.Then acceleration frequency response is figured out by finite element methods.Comparing with the accelerations of two different conditions,additional masses are calculated.At last.the influences carried by additional mass during the designing of vibration table are analyzed.
Key words: vibration table    additional mass    solid-fluid coupling    response analysis
出版日期: 2002-12-28
服务  
把本文推荐给朋友
加入引用管理器
E-mail Alert
RSS
作者相关文章  
吴昌聚
沈润杰
何闻
贾叔仕

引用本文:

吴昌聚, 沈润杰, 何闻, 贾叔仕. 振动台在无限流体域中台面附加质量研究[J]. 工程设计学报, 2002, 9(5): 275-278.

WU Chang-Ju, SHEN Run-Jie, HE Wen, JIA Shu-Shi. Research on additional mass when vibration table vibrates in infinite liquid[J]. Chinese Journal of Engineering Design, 2002, 9(5): 275-278.

链接本文:

https://www.zjujournals.com/gcsjxb/CN/        https://www.zjujournals.com/gcsjxb/CN/Y2002/V9/I5/275

[1] 况雨春,钟辉,钟良春. 类圆弧线型螺杆马达的设计与研究[J]. 工程设计学报, 2023, 30(5): 640-649.
[2] 张云, 张瑞宾, 莫德赟, 刘晓刚. 电磁式发动机水冷系统流固耦合传热研究[J]. 工程设计学报, 2021, 28(3): 344-349.
[3] 王玉璞, 程文明, 杜润, 王书标, 杨行舟, 翟守才. 大型门式起重机风荷载响应仿真分析[J]. 工程设计学报, 2020, 27(2): 239-246.
[4] 钟强, 骆正山. 油气水三相段塞流引起的海洋立管耦合振动响应[J]. 工程设计学报, 2019, 26(1): 95-101.
[5] 邓小雷, 庞世杰, 李瑞琦, 周宜博, 王建臣, 傅建中. 基于昆虫翅脉仿生流道的数控机床主轴系统冷却结构热设计[J]. 工程设计学报, 2018, 25(5): 583-589.
[6] 杨晨光, 邵宝东, 王丽凤, 杨洋. 基于热阻网络模型的硅基微槽热沉多目标优化设计[J]. 工程设计学报, 2018, 25(4): 426-433.
[7] 徐玉梁, 刘为, 王振, 祖炳锋, 白杨, 刘丽娜. 发动机振动对排气歧管低周疲劳寿命影响研究[J]. 工程设计学报, 2018, 25(3): 330-337.
[8] 王萌, 徐晓婷, 李文强. 基于流固耦合的弹载电子设备瞬态热仿真分析方法[J]. 工程设计学报, 2018, 25(2): 194-199,208.
[9] 卢燕, 王珏, 凌明祥, 杜平安. 精密离心机热变形多物理场耦合数值计算[J]. 工程设计学报, 2016, 23(1): 49-53,73.
[10] 郑传祥,李蓉,王亮,魏宗新,刘远峰. 小型制冷压缩机吸气阀的流固耦合分析和优化研究[J]. 工程设计学报, 2014, 21(1): 68-74.
[11] 张青雷,沈海鸥,王少波,陈冰. 高速动平衡机摆架振动特性分析与改进[J]. 工程设计学报, 2012, 19(2): 91-95.
[12] 沈润杰, 何闻. 离心机动力学特性分析及设计技术[J]. 工程设计学报, 2006, 13(3): 150-153.