建模、仿真、分析与决策 |
|
|
|
|
对转圆柱滚子轴承动态特性分析 |
张龙隆1( ),肖正明1( ),刘江1,刘卫标2 |
1.昆明理工大学 机电工程学院,云南 昆明 650500 2.云南昆钢重型装备制造集团有限公司,云南 昆明 650501 |
|
Dynamic characteristics analysis of counter-rotating cylindrical roller bearing |
Long-long ZHANG1( ),Zheng-ming XIAO1( ),Jiang LIU1,Wei-biao LIU2 |
1.Faculty of Mechanical and Electrical Engineering, Kunming University of Science and Technology, Kunming 650500, China 2.Yunnan Kunming Iron & Steel Heavy Equipment Manufacturing Group Co. , Ltd. , Kunming 650501, China |
引用本文:
张龙隆,肖正明,刘江,刘卫标. 对转圆柱滚子轴承动态特性分析[J]. 工程设计学报, 2023, 30(1): 93-101.
Long-long ZHANG,Zheng-ming XIAO,Jiang LIU,Wei-biao LIU. Dynamic characteristics analysis of counter-rotating cylindrical roller bearing[J]. Chinese Journal of Engineering Design, 2023, 30(1): 93-101.
链接本文:
https://www.zjujournals.com/gcsjxb/CN/10.3785/j.issn.1006-754X.2023.00.014
或
https://www.zjujournals.com/gcsjxb/CN/Y2023/V30/I1/93
|
1 |
GAMBLE W, VALORI R. Development of counter-rotating intershaft support bearing technology[J]. Journal of Aircraft, 1983, 20(6): 557-563.
|
2 |
BILL C. Counterrotating differential cylindrical roller bearing development[C]//23rd Joint Propulsion Conference, San Diego, California, Jun. 29- Jul. 2, 1987.
|
3 |
CAVALLARO G, NELIAS D, BON F. Analysis of high-speed intershaft cylindrical roller bearing with flexible rings [J]. Tribology and Lubrication Technology, 2005, 48(2): 154-164.
|
4 |
林国昌,徐从儒,林基恕.滚子轴承准静态计算分析[J].航空动力学报,1992,7(1):17-21. LIN Guo-chang, XU Cong-ru, LIN Ji-shu. Quasi-static analysis of roller bearing[J].Journal of Aerospace Power, 1992, 7(1): 17-21.
|
5 |
杨喜关.航空发动机反向旋转双转子系统及中介轴承动力特性研究[D].南京:南京航空航天大学,2014:44-56. YANG Xi-guan. Research on dynamic characteristics of counter-rotating dual-rotor system and intermediate bearing in aeroengines[D]. Nanjing: Nanjing University of Aeronautics and Astronautics, 2014: 44-56.
|
6 |
符毅强.双转子系统非线性动力学响应分析[D].哈尔滨:哈尔滨工业大学,2015:40-51. FU Yi-qiang. Nonlinear dynamic response analysis of dual-rotor system[D]. Harbin: Harbin Institute of Technology, 2015: 40-51.
|
7 |
侯磊,符毅强,陈予恕.考虑中介轴承波纹度的双转子系统的非线性振动[J].航空动力学报,2017,32(3):714-722. HOU Lei, FU Yi-qiang, CHEN Yu-shu. Nonlinear vibration of dual-rotor system with surface waviness in intershaft bearing[J]. Journal of Aerospace Power, 2017, 32(3): 714-722.
|
8 |
胡绚,罗贵火,高德平.圆柱滚子中介轴承拟静力学分析[J].航空动力学报,2006,21(6):1069-1074. doi:10.3969/j.issn.1000-8055.2006.06.021 HU Xuan, LUO Gui-huo, GAO De-ping. Quasi-static analysis of cylindrical roller intershaft bearing[J]. Journal of Aerospace Power, 2006, 21(6): 1069-1074.
doi: 10.3969/j.issn.1000-8055.2006.06.021
|
9 |
胡绚,罗贵火,高德平.航空发动机中介轴承的特性分析[J].航空动力学报,2007,22(3):439-443. doi:10.3969/j.issn.1000-8055.2007.03.019 HU Xuan, LUO Gui-huo, GAO De-ping. Performance analysis of aero engine intershaft bearing[J]. Journal of Aerospace Power, 2007, 22(3): 439-443.
doi: 10.3969/j.issn.1000-8055.2007.03.019
|
10 |
任国哲,刘振侠,高文君,等.基于拟动力学方法的反转圆柱滚子轴承动力学特性研究[J].推进技术,2016,37(2):354-361. doi:10.13675/j.cnki.tjjs.2016.02.021 REN Guo-zhe, LIU Zhen-xia, GAO Wen-jun, et al. Research on dynamic behaviors of counter-rotating cylindrical roller bearing based on quasi-dynamic method[J]. Journal of Propulsion Technology, 2016, 37(2): 354-361.
doi: 10.13675/j.cnki.tjjs.2016.02.021
|
11 |
李静,曹树谦,郭虎伦.中介轴承波纹度对双转子系统动力学特性的影响[J].机械科学与技术,2020,39(11):1794-1804. LI Jing, CAO Shu-qian, GUO Hu-lun. Effects of surface waviness of intershaft bearing on dynamic characteristics of dual rotor system[J]. Mechanical Science and Technology for Aerospace Engineering, 2020, 39(11): 1794-1804.
|
12 |
高朋,侯磊,陈予恕.双转子系统中介轴承的动载荷及其对轴承温度的影响[J].机械工程学报,2022,58(5):87-97. doi:10.3901/JME.2022.05.87 GAO Peng, HOU Lei, CHEN Yu-shu. Dynamic load of the inter-shaft bearing and its influence on bearing’s temperature[J]. Journal of Mechanical Engineering, 2022, 58(5): 87-97.
doi: 10.3901/JME.2022.05.87
|
13 |
GAO Peng, CHEN Yu-shu, HOU Lei. Nonlinear thermal behaviors of the inter-shaft bearing in a dual-rotor system subjected to the dynamic load[J]. Nonlinear Dynamics, 2020, 101(1): 191-209.
|
14 |
晏资文.同轴对转双转子虚拟动平衡原理及方法研究[D].北京:北京化工大学,2021:49-80. YAN Zi-wen. Research on principle and method of virtual dynamic balance of coaxial counter rotating double rotors[D]. Beijing: Beijing University of Chemical Technology, 2021: 49-80.
|
15 |
曹宏瑞,景新,苏帅鸣,等.中介轴承故障动力学建模与振动特征分析[J].机械工程学报,2020,56(21):89-99. doi:10.3901/jme.2020.21.089 CAO Hong-rui, JING Xin, SU Shuai-ming, et al. Dynamic modeling and vibration analysis for inter-shaft bearing fault[J]. Journal of Mechanical Engineering, 2020, 56(21): 89-99.
doi: 10.3901/jme.2020.21.089
|
16 |
蒋云帆,石斌,张通,等.不同支承结构下同转/对转中介轴承的刚度特性[J].推进技术,2022,43(10):356-367. JIANG Yun-fan, SHI Bin, ZHANG Tong,et al. Stiffness characteristic of co-rotating/counter-rotating inter-shaft bearing with different supporting structures[J]. Journal of Propulsion Technology, 2022, 43(10): 356-367.
|
17 |
王洪明.航空发动机轴承游隙对发动机振动的影响分析[J].湖南工程学院学报(自然科学版),2020,30(2):47-51. WANG Hong-ming. Influence of bearing clearance on aero-engine vibration[J]. Journal of Hunan Institute of Engineering (Natural Science Edition), 2020, 30(2): 47-51.
|
18 |
HARRIS T A, KOTZALAS M N.滚动轴承分析(第1卷):轴承技术的基本概念[M].罗继伟,马伟,杨咸启,等译.北京:机械工业出版社,2009:49-85. doi:10.1201/9781482275148 HARRIS T A,KOTZALAS M N. Rolling bearing analysis (Volume 1 ) : basic concept of bearing technology[M]. Translated by LUO Ji-wei, MA Wei, YANG Xian-qi, et al. Beijing: China Machine Press, 2009: 49-85.
doi: 10.1201/9781482275148
|
19 |
万长森.滚动轴承的分析方法[M].北京:机械工业出版社,1987:329-338. WAN Chang-sen. Analysis method of rolling bearing[M]. Beijing: China Machine Press, 1987: 329-338.
|
20 |
HARRIS T. An analytical method to predict skidding in high speed roller bearings[J]. ASLE Transactions, 1966, 9(3): 229-241.
|
21 |
ECHÁVARRI O J, EDUARDO D, CHACÓN T E,et al. Analytical model for predicting friction in line contacts[J]. Lubrication Science, 2016, 28(4): 189-205.
|
22 |
张占立,王燕霜,邓四二,等.高速圆柱滚子轴承动态特性分析[J].航空动力学报,2011,26(2):397-403. doi:10.3969/j.issn.1672-3147.2013.02.006 ZHANG Zhan-li, WANG Yan-shuang, DENG Si-er, et al. Analysis on dynamic characteristics of high speed cylindrical roller bearing[J]. Journal of Aerospace Power, 2011, 26(2): 397-403.
doi: 10.3969/j.issn.1672-3147.2013.02.006
|
23 |
邓四二,贾群义.滚动轴承设计原理[M].北京:中国标准出版社,2008:119-126. DENG Si-er, JIA Qun-yi. Design principle of rolling bearing[M]. Beijing: Standards Press of China, 2008: 119-126.
|
|
Viewed |
|
|
|
Full text
|
|
|
|
|
Abstract
|
|
|
|
|
Cited |
|
|
|
|
|
Shared |
|
|
|
|
|
Discussed |
|
|
|
|