Please wait a minute...
工程设计学报  2019, Vol. 26 Issue (5): 497-505    DOI: 10.3785/j.issn.1006-754X.2019.05.001
设计理论与方法学     
计算机辅助Watt型平面六连杆机构分支自动识别
王君, 冯康瑞, 程群超, 李文涛, 汪泉
湖北工业大学 机械工程学院机器人技术研究中心, 湖北 武汉 430068
Computer-aided Watt-type planar six-bar linkage branch automatic identification
WANG Jun, FENG Kang-rui, CHENG Qun-chao, LI Wen-tao, WANG Quan
Research Center of Robot Technology, School of Mechanical Engineering, Hubei University of Technology, Wuhan 430068, China
 全文: PDF(2078 KB)   HTML
摘要: 针对Watt型平面六连杆机构解域分析问题,提出了基于欧拉公式和判别法的平面四环链和平面六环链的奇异点识别方法,并结合平面四环链和平面六环链的运动特征,对Watt型平面六连杆机构进行了分支自动识别研究。首先,基于提出的识别方法并结合MFC(microsoft foundation classes,微软基础类库)设计了计算机辅助识别软件,实现对Watt型平面六连杆机构的分支、构型位置以及奇异点坐标的自动识别。然后,基于识别结果分析Watt型平面六连杆机构的可行域,再根据Watt型平面六连杆机构的可行域生成机构的运动仿真视频,并通过仿真视频分析其运动学特性。最后,结合实例演示Watt型平面六连杆机构分支的自动识别过程。结果显示该计算机辅助识别软件能够对该机构分支进行自动判别。研究结果表明利用所提出的Watt型平面六连杆机构分支自动识别方法可简便快捷地实现对机构的可行域分析和运动学分析,具有较强的工程实用性。
Abstract: Aiming at the problem of solution domain analysis of Watt-type planar six-bar linkage, a singularity identification method based on Euler formula and discriminate method for planar four-link chain and planar six-link chain was proposed. Combining the motion characteristics of planar four-link chain and planar six-link chain, the branch automatic identification for Watt planar six-link mechanism was studied. Firstly, based on the proposed recognition method and the MFC (microsoft foundation classes), a computer-aided identification software was designed to realize the automatic recognition of the branch, configuration position and singular point coordinates of Watt-type planar six-bar linkage. Secondly, according to the recognition results, the feasible region of Watt-type planar six-bar linkage was analyzed. According to the feasible region, the motion simulation video of the linkage was generated, and the kinematics characteristics were analyzed by the simulation video. Finally, the automatic identification process of Watt-type planar six-bar linkage was demonstrated by examples. The results showed that the computer aided identification software could automatically discriminate the branches of Watt-type planar six-bar linkage. The research results indicate that the proposed Watt-type planar six-bar linkage branch automatic identification method can realize the feasible domain analysis and kinematics analysis of the linkage easily and quickly,and has a strong engineering practicability.
收稿日期: 2019-05-15 出版日期: 2019-10-28
CLC:  TH 122  
基金资助: 国家自然科学基金资助项目(51405140,51675015);湖北省自然科学基金重点项目(2015CFA112);湖北省教育厅优秀中青年科技创新团队项目(T201505)
作者简介: 王君(1977—),男,湖北仙桃人,教授,博士,从事连杆机构设计与机器人研究,E-mail:junwang@hbut.edu.cn,https://orcid.org/0000-0001-7287-4493
服务  
把本文推荐给朋友
加入引用管理器
E-mail Alert
RSS
作者相关文章  

引用本文:

王君, 冯康瑞, 程群超, 李文涛, 汪泉. 计算机辅助Watt型平面六连杆机构分支自动识别[J]. 工程设计学报, 2019, 26(5): 497-505.

WANG Jun, FENG Kang-rui, CHENG Qun-chao, LI Wen-tao, WANG Quan. Computer-aided Watt-type planar six-bar linkage branch automatic identification. Chinese Journal of Engineering Design, 2019, 26(5): 497-505.

链接本文:

https://www.zjujournals.com/gcsjxb/CN/10.3785/j.issn.1006-754X.2019.05.001        https://www.zjujournals.com/gcsjxb/CN/Y2019/V26/I5/497

[1] 王碧海, 张健, 陈永亮, 彭庆金, 顾佩华. 盾构螺旋输送机适应性设计智能决策[J]. 工程设计学报, 2022, 29(1): 1-9.
[2] 陶晓东, 郭安福, 李辉, 韩伟, 李万才, 李涛. 基于灵敏度分析的盘式开沟机性能分析及优化[J]. 工程设计学报, 2022, 29(1): 59-65.
[3] 樊霄岳, 刘启, 官威, 朱云, 陈苏琳, 沈彬. 电磁微锻机构热效应模拟与实验研究[J]. 工程设计学报, 2022, 29(1): 66-73.
[4] 王洪刚, 康存锋, 陈康文, 季源隆, 浦秋然, 张雷雨. 滑块摇杆机构对小腿三头肌康复的作用研究[J]. 工程设计学报, 2021, 28(6): 687-693.
[5] 倪维宇, 张横, 姚胜卫. 基于多工况的汽车座椅骨架轻量化设计[J]. 工程设计学报, 2021, 28(6): 729-736.
[6] 倪子健, 李文强, 唐忠. 基于网络表示学习的本体语义挖掘与功能语义检索方法[J]. 工程设计学报, 2021, 28(5): 539-547.
[7] 郑雨辰, 鞠锋, 王旦, 孙敬滨, 王亚明, 陈柏. 航空发动机叶片检测机器人的设计与控制研究[J]. 工程设计学报, 2021, 28(5): 625-632.
[8] 赵波, 赵海鸣, 刘晨, 胡刚. 悬立式深海钴结壳采矿头的参数化设计与优化[J]. 工程设计学报, 2021, 28(5): 559-568.
[9] 高翔, 王林军, 杜义贤, 李响, 徐柳. 基于云模型人工鱼群算法的模糊优化设计[J]. 工程设计学报, 2021, 28(4): 433-442.
[10] 曹恩国, 王刚, 王琨, 高阳. 基于弹性装置驱动的外骨骼助行效能评价[J]. 工程设计学报, 2021, 28(4): 480-488.
[11] 陈洪月, 张站立, 吕掌权. 线性压缩机圆柱臂盘簧的设计及性能研究[J]. 工程设计学报, 2021, 28(4): 504-510.
[12] 张璞, 王峻峰, 高一聪, 张雪健. 集成ADTRIZ的箱式电梯防疫功能创新设计[J]. 工程设计学报, 2021, 28(3): 305-311.
[13] 钟良春, 况雨春, 舒峰, 张聪. 考虑压力与温度影响的螺杆马达过盈量设计方法[J]. 工程设计学报, 2021, 28(3): 321-328.
[14] 孙之琳, 王凯峰, 陈永亮, 薛德意, 顾佩华. 产品可适应设计评价的信息熵方法[J]. 工程设计学报, 2021, 28(1): 1-13.
[15] 白仲航, 孙意为, 许彤, 丁满. 基于设计任务的概念设计中产品数字孪生模型的构建[J]. 工程设计学报, 2020, 27(6): 681-689.