建模、分析、优化和决策 |
|
|
|
|
无轨伸缩式门式起重机接触部位的有限元分析 |
邓星, 于兰峰, 雷聪, 徐江平, 肖泽平 |
西南交通大学 机械工程学院, 四川 成都 610031 |
|
Research on contact problem of trackless telescopic gantry crane |
DENG Xing, YU Lan-feng, LEI Cong, XU Jiang-ping, XIAO Ze-ping |
School of Mechanical Engineering, Southwest Jiaotong University, Chengdu 610031, China |
引用本文:
邓星, 于兰峰, 雷聪, 徐江平, 肖泽平. 无轨伸缩式门式起重机接触部位的有限元分析[J]. 工程设计学报, 2018, 25(1): 79-84,93.
DENG Xing, YU Lan-feng, LEI Cong, XU Jiang-ping, XIAO Ze-ping. Research on contact problem of trackless telescopic gantry crane. Chinese Journal of Engineering Design, 2018, 25(1): 79-84,93.
链接本文:
https://www.zjujournals.com/gcsjxb/CN/10.3785/j.issn.1006-754X.2018.01.011
或
https://www.zjujournals.com/gcsjxb/CN/Y2018/V25/I1/79
|
[1] 赵国祝.双块式无砟轨道快速施工综合技术及配套设备、工装技术[D].西安:西安建筑科技大学土木工程学院,2012:15-21. ZHAO Guo-zhu. The comprehensive technique and the matched equipment, the tooling technology which are used in the fast construction of the double-block ballastless track[D]. Xi'an:Xi'an University of Architecture and Technology, School of Civil Engineering, 2012:15-21. [2] 卿三惠,胡健,陈叔.京津城际高速铁路无砟轨道施工技术及装备创新[J].高速铁路技术,2010,1(1):61-65. QING San-hui, HU Jian, CHEN Shu. Construction technology and equipment innovation for ballastless track of Beijing-Tianjin intercity high speed railway[J]. High-Speed Railway Technology, 2010, 1(1):61-65. [3] 陈叔,史渡,龚成光.CRTS-Ⅱ型板式无碴轨道施工成套设备国产化研制[J].建设机械技术与管理,2008,21(6):66-71. CHEN Shu, SHI Du, GONG Cheng-guang. Development of homeland whole set equipment of CRTS-slab ballastless track construction[J]. Construction Machinery Technology and Management, 2008, 21(6):66-71. [4] 王浩.轮胎式变跨龙门吊的设计[J].铁道建筑技术,2012(8):109-112. WANG Hao. Design of rubber tire type crane with variable span[J]. Railway Construction Technology, 2012(8):109-112. [5] 刘继平,李晓钢.无砟轨道铺装设备的设计研究[J].铁道工程学报,2007,24(s1):191-194. LIU Ji-ping, LI Xiao-gang. Research on the design for laying equipment of ballastless track[J]. Journal of Railway Engineering, 2007, 24(s1):191-194. [6] 卿三惠,陈叔,胡建.高速铁路CRTSⅡ型板式无砟轨道施工关键设备及施工技术研究[J].铁道工程学报,2008,25(7):22-27. QING San-hui, CHEN Shu, HU Jian. Research on key equipment and construction technology of CRTSⅡslab ballastless track construction for high speed railway[J]. Journal of Railway Engineering, 2008, 25(7):22-27. [7] 胡青春,倘广垒,谢文牧.箱型伸缩臂滑块接触应力的显著性分析[J].现代制造工程,2015(12):109-112. HU Qing-chun, CHANG Guang-lei, XIE Wen-mu. Sensitivity analysis of the slider's contact stress of the telescopic boom based on orthogonal design[J]. Modern Manufacturing Engineering, 2015(12):109-112. [8] 李小平,郑建标,郧建国.随车起重机伸缩臂的非线性接触有限元分析[J].现代制造工程,2014(6):68-71. LI Xiao-ping, ZHEN Jian-biao, YUN Jian-guo. Nonlinear contact finite element analysis on the telescopic boom of a truck-mounted crane[J]. Modern Manufacturing Engineering, 2014(6):68-71. [9] 李志敏.伸缩吊臂滑块局部应力分析及变化规律研究[D].成都:西南交通大学机械工程学院,2009:47-48. LI Zhi-min. Localized stress analysis and variation law of telescopic crane slider[D]. Chengdu:Southwest Jiaotong University, School of Mechanical Engineering, 2009:47-48. [10] 张洪伟,高相胜,张庆余.ANSYS非线性有限元分析方法及范例应用[M].北京:中国水利水电出版社,2013:161-162. ZHANG Hong-wei, GAO Xiang-shen, ZHANG Qing-yu. ANSYS nonlinear finite element analysis method and its application[M]. Beijing:China Water Conservancy and Hydropower Press, 2013:161-162. [11] 张涔涔.伸缩臂式履带起重机支腿滑块接触分析[D].大连:大连理工大学机械工程学院,2012:24-25. ZHANG Cen-cen. Contact analysis on outrigger's sliders of telescopic crawler crane[D]. Dalian:Dalian University of Technology, School of Mechanical Engineering, 2012:24-25. [12] 林雪.箱型伸缩臂滑块的接触分析及规律研究[D].大连:大连理工大学机械工程学院,2011:22-23. LIN Xue. Analysis of contact problems and study of regularity on telescopic boom's sliders[D]. Dalian:Dalian University of Technology, School of Mechanical Engineering, 2011:22-23. [13] 王金诺,于兰峰.起重运输机械金属结构[M].北京:中国铁道出版社,2002:43-47. WANG Jin-nuo, YU Lan-feng. Hoisting and conveying machinery metal structure[M]. Beijing:China Railway Press, 2002:43-47. [14] 程兵,于兰峰,符康,等.地坑式架车机托头接触问题的有限元分析[J].铁道科学与工程学,2017,14(2):364-369. CHENG Bing, YU Lan-feng, FU-Kang, et al. Finite element analysis of the contact problem on the head of underfloor lifting system[J]. Journal of Railway Science and Engineering, 2017, 14(2):364-369. [15] 纪爱敏,彭铎.QY25K型汽车起重机伸缩吊臂的有限元分析[J].工程机械,2003,34(1):19-21. JI Ai-min, PENG Duo. QY25K type truck crane telescopic boom finite element analysis[J]. Construction Machinery, 2003, 34(1):19-21. [16] 纪爱敏,彭铎,刘木南.三种工况下大型吊臂的有限元分析[J].工程机械,2006,37(2):30-33. JI Ai-min, PENG Duo, LIU Mu-nan. Finite element analysis of large boom under three working conditions[J]. Construction Machinery, 2006, 37(2):30-33. [17] XU G, HAN X, ZUO B, et al. Study on different treatment ways of slider joint for solid-webbed telescopic jib[J]. MATEC Web of Conferences, 2015, 31:26-27. [18] 王高一,吴新跃,毛艳蕾.装配体结构动态分析中不同连接方法对比分析[J].机械传动,2016,40(5):125-127. WANG Gao-yi, WU Xin-yue, MAO Yan-lei. Comparison and analysis of different connection methods in structure dynamic analysis of assemblies[J]. Mechanical Transmission, 2016, 40(5):125-127. [19] 于瀚翔,于兰峰,李少鹏.基于有限元法的高空作业车伸缩臂接触分析[J].机械科学与技术,2014,33(12):1773-1776. YU Han-xiang, YU Lan-feng, LI Shao-peng. Finite element analysis of the contact problem on the telescopic boom of hydraulic aerial cage[J]. Mechanical Science and Technology, 2014, 33(12):1773-1776. [20] 何君毅,林祥都.工程结构非线性问题的数值解法[M].北京:国防工业出版社,1994:83-84. HE Jun-yi, LIN Xiang-du. Numerical methods for nonlinear problem of engineering structures[M]. Beijing:National Defense of Industry Press, 1994:83-84. |
|
Viewed |
|
|
|
Full text
|
|
|
|
|
Abstract
|
|
|
|
|
Cited |
|
|
|
|
|
Shared |
|
|
|
|
|
Discussed |
|
|
|
|