Please wait a minute...
工程设计学报
工程设计学报  2009, Vol. 16 Issue (6): 395-400    
工程设计理论、方法与技术     
基于功能本体的再创新设计策略研究
 徐荣华, 唐敦兵, 朱仁淼, 陈旭玲, 臧铁钢
南京航空航天大学 机电工程学院,江苏 南京 210016
Research on recreative design strategy based on function ontology
 XU  Rong-Hua, TANG  Dun-Bing, ZHU  Ren-Miao, CHEN  Xu-Ling, ZANG  Tie-Gang
School of Mechanical and Electrical Engineering, Nanjing University of Aeronautics &
Astronautics, Nanjing 210016, China
 全文: PDF(5414 KB)   HTML
摘要： 针对目前我国很多企业消化吸收新技术和二次创新能力明显不足的状况, 提出一种基于功能本体的再创新设计策略.利用功能本体知识库,对产品结构进行功能匹配与功能组合,实现从已有产品结构到其功能的映射；在全面理解和消化吸收其原始功能模型基础上,通过对核心功能的泛化与具体化来分析同义或反义功能语义表述,从而得到合适的替代功能来实现功能变更, 并通过对原始功能的改进与替换来产生新的功能模型.在功能实现方法库中寻求新的功能实现方法,从而实现对产品的再创新设计.最后,用实例阐述了上述的再创新设计方法.
关键词： 功能模型;  功能本体;  再创新设计    
Abstract: To improve the capacity of domestic enterprises in technology absorption, assimilation and recreation, a re-creative design method based on function ontology was proposed. By using the knowledge library of function ontology, the structure-to-function mapping was conducted through function matching and function combination. After comprehensively understanding and abstracting the original function model, the functional synonyms and antonyms were analyzed by functional generalization and specification and function variation was achieved by the obtained substitute function. And through the improvement and replacement of the original function, an upgraded function model was obtained and the re-creative design of products was implemented by seeking a new function realization method in the function realization method library. A case study is given to illustrate the proposed re-creative design method．
Key words: function model    function ontology    re-creative design
出版日期: 2009-12-28
:  TH 122  
基金资助:

国家自然科学基金资助项目(50775111,50505017)
服务　　
把本文推荐给朋友
加入引用管理器
E-mail Alert
RSS
作者相关文章　　
徐荣华
唐敦兵
朱仁淼
陈旭玲
臧铁钢

引用本文:

徐荣华, 唐敦兵, 朱仁淼, 陈旭玲, 臧铁钢. 基于功能本体的再创新设计策略研究[J]. 工程设计学报, 2009, 16(6): 395-400.

XU Rong-Hua, TANG Dun-Bing, ZHU Ren-Miao, CHEN Xu-Ling, ZANG Tie-Gang. Research on recreative design strategy based on function ontology[J]. Chinese Journal of Engineering Design, 2009, 16(6): 395-400.

链接本文:

https://www.zjujournals.com/gcsjxb/CN/    或    https://www.zjujournals.com/gcsjxb/CN/Y2009/V16/I6/395

[1] 白仲航,艾琳璟. 基于功能表面驱动与可拓工具的产品人机工程问题确定方法研究[J]. 工程设计学报, 2023, 30(5): 531-544.
[2] 李帅军, 贺华波, 邓益民. 基于功能主题链和功能本体的创新组合设计初探[J]. 工程设计学报, 2016, 23(2): 124-129,135.
[3] 蒋宇欢, 陈泳, 黄健, 谢友柏. 功能作用收集及其分类研究[J]. 工程设计学报, 2016, 23(2): 101-107.
[4] 檀润华, 苑彩云, 曹国忠, 张瑞红. 反向鱼骨图下的现有产品功能模型建立[J]. 工程设计学报, 2003, 10(4): 197-201.