Please wait a minute...
工程设计学报
工程设计学报  2018, Vol. 25 Issue (6): 675-682    DOI: 10.3785/j.issn.1006-754X.2018.06.008
优化设计     
大截面碳纤维导线卡线器夹嘴优化设计
万建成, 江明, 杨磊, 刘晨
中国电力科学研究院有限公司, 北京 100055
Optimization design of grip jaw for large cross section carbon fiber conductor
WAN Jian-cheng, JIANG Ming, YANG Lei, LIU Chen
China Electric Power Research Institute, Beijing 100055
 全文: PDF(11645 KB)   HTML
摘要：

卡线器夹嘴长度决定着平行移动式导线卡线器的整体尺寸和质量，也决定着被夹持导线是否会发生损伤。针对夹嘴长度多以导线直径乘放大倍率、试验验证的方法确定，缺乏一定理论支撑，通过对1 660 mm2大截面碳纤维导线的结构特点进行分析，并利用试验得出碳纤维导线芯棒径向耐压强度判据。参考1 250 mm2导线应力仿真结果得出型线铝股塑性范围判据，取夹嘴长度为350，325，275 mm，对1 660 mm2大截面碳纤维导线进行仿真研究，并根据仿真结果优化设计了适用于JLZ2X1/F2A-1660/95-492型1 660 mm2大截面碳纤维导线卡线器。优化后的导线卡线器的夹嘴长度减小了21.9%，质量减小了25.0%。研究结果可为卡线器的设计和优化提供参考依据。
关键词： 碳纤维导线;  卡线器;  夹嘴长度;  优化设计    
Abstract:

As the key parameter, the length of the jaw of the parallel mobile grip determines the size and quality of the grip, and it also determines whether the conductor is damaged. In view of the fact that the length of the jaw was mostly determined by the condutor diameter magnification ratio and the test, and it lacked some theoretical support, the structural characteristics of 1 660 mm2 large cross section carbon fiber conductor were analyzed, and the radial compressive strength criterion of carbon fiber was obtained through tests. Referring to the stress simulation results of the 1 250 mm2 conductor, the plastic deformation range of the aluminum shaped wires was obtained. The simulation study of 1600 mm2 large cross section carbon fiber conductor was carried out when the length of the jaw was 350, 325 and 275 mm. Based on the simulation results, a grip for JLZ2X1/F2A-1660/95-492 type 1660 mm2 large cross section carbon fiber conductor was designed and optimized. After optimized design, the length of the jaw was reduced by 21.9%, and the weight of grip was reduced by 25.0%. The research results can provide reference for the design and analysis of the grip.
Key words: carbon fiber conductor    grip    length of jaw    optimization design
收稿日期: 2017-12-18 出版日期: 2018-12-28
CLC:  TM751  
基金资助:

国家电网公司科技项目（GC71-17-007）
通讯作者: 杨磊(1987-),男,河北邯郸人,工程师,硕士,从事输电线路施工及机具研究,E-mail:379247828@qq.com,https://orcid.org/0000-0002-6465-5060     E-mail: 379247828@qq.com
作者简介: 万建成(1971-),女,天津人,高级工程师,硕士,从事导线、金具及其施工技术等研究,E-mail:wjc1971@163.com,https://orcid.org/0000-0002-3884-8977
服务　　
把本文推荐给朋友
加入引用管理器
E-mail Alert
RSS
作者相关文章　　
万建成
江明
杨磊
刘晨

引用本文:

万建成, 江明, 杨磊, 刘晨. 大截面碳纤维导线卡线器夹嘴优化设计[J]. 工程设计学报, 2018, 25(6): 675-682.

WAN Jian-cheng, JIANG Ming, YANG Lei, LIU Chen. Optimization design of grip jaw for large cross section carbon fiber conductor[J]. Chinese Journal of Engineering Design, 2018, 25(6): 675-682.

链接本文:

https://www.zjujournals.com/gcsjxb/CN/10.3785/j.issn.1006-754X.2018.06.008    或    https://www.zjujournals.com/gcsjxb/CN/Y2018/V25/I6/675

[1] 蒋平海,高怡,陈其泽,等.架空输电线路施工机具手册[M].北京:中国电力出版社,2014:1. JIANG Ping-hai, GAO Yi, CHEN Qi-ze, et al. Construction tool manual for overhead transmission line[M]. Beijing:China Electric Power Press, 2014:1.
[2] 中国电力科学研究院有限公司.碳纤维复合芯铝绞线施工工艺及验收导则:DL/T 5284-2012[S].北京:中国电力出版社,2012:3. China Electric Power Research Institute Co., Ltd.. Guide for construction and acceptance of carbon fibre complex core aluminium stranded wire:DL/T 5284-2012[S]. Beijing:China Electric Power Press, 2012:3.
[3] 中国电力科学研究院有限公司.架空输电线路施工机具基本技术要求:DL/T 875-2016[S].北京:中国电力出版社,2016:14-15. China Electric Power Research Institute Co., Ltd.. Basic technical requirements of construction machines and tools for overhead transmission line:DL/T 875-2016[S]. Beijing:China Electric Power Press, 2016:14-15.
[4] 陈曼龙,张琦.720K900Z型扩径导线卡线器的设计要点[J].陕西理工学院学报(自然科学版),2015,31(5):11-15. CHEN Man-long, ZHANG Qi. Key points in design of rope clamps for extended diameter wires[J]. Journal of Shaanxi University of Technology (Natural Science Edition), 2015, 31(5):11-15.
[5] 孟宪彬,戴云飞,王红辉.特制卡线器在碳纤维复合芯导线施工中的应用[J].光纤与电缆及其应用技术,2014(5):39-41. MENG Xian-bin, DAI Yun-fei, WANG Hong-hui. Application of special wire stop-dog in carbon fiber composite core wire construction[J]. Optical Fiber & Electric Cable and Their Applications, 2014(5):39-41.
[6] 任军才.可调式放扭钢丝绳卡线器的研制[J].机电工程技术,2012,41(9):83-89. REN Jun-cai. Research and production of adjustable anti-twisting wire rope clamps[J]. Mechanical & Electrical Engineering Technology, 2012, 41(9):83-89.
[7] 何州文,陈新,王秋玲,等.国内碳纤维复合芯导线的研究和应用综述[J].电力建设,2010,31(4):90-93. HE Zhou-wen, CHEN Xin, WANG Qiu-ling, et al. Research and application overview of ACCC conductor in China[J]. Electric Power Construction, 2010, 31(4):90-93.
[8] 王秋玲,何州文,张卓,等.新型复合导线用碳纤维芯材的制备工艺[J].电力建设,2010,31(3):106-108. WANG Qiu-ling, HE Zhou-wen, ZHANG Zhuo, et al. Molding process of carbon fiber core material of new composite cable[J]. Electric Power Construction, 2010, 31(3):106-108.
[9] 张春雷,胡平,何凤生.架空导线碳纤维复合芯棒的结构、组织和性能分析[J].南方电网技术,2012,6(2):104-107. ZHANG Chun-lei, HU Ping, HE Feng-sheng. Analysis on the structure, texture and properties of carbon fiber composite core for an overhead conductor[J]. Southern Power System Technology, 2012, 6(2):104-107.
[10] 李磊,陈伟,万建成.碳纤维复合材料芯导线在国内推广应用的技术经济分析[J].电力建设,2012,33(9):79-82. LI Lei, CHEN Wei, WAN Jian-cheng. Technical and economic analysis on popularization and application of conductor with reinforced core of carbon fiber in China[J]. Electric Power Construction, 2012, 33(9):79-82.
[11] 万建成.架空导线应用技术[M].北京:中国电力出版社,2015:197. WAN Jian-cheng. Application technology of overhead wire[M]. Beijing:China Electric Power Press, 2015:197.
[12] 李玮,段成红,吴祥.碳纤维复合材料强度的有限元模拟[J].玻璃钢/复合材料,2011(1):20-23. LI Wei, DUAN Cheng-hong, WU Xiang. Finite element simulation for the strength of carbon fiber composite material[J]. Fiber Reinforced Plastics/Composites, 2011(1):20-23.
[13] 余虹云,王梁,李瑞,等.架空导线用碳纤维复合芯棒拉伸破坏形式分析[J].中国电力,2014,47(1):49-52. YU Hong-yun, WANG Liang, LI Rui, et al. Analysis on the tensile failure modes of carbon fiber composite core rod used in overhead stranded wires[J]. Electric Power, 2014, 47(1):49-52.
[14] 万建成,彭飞,江明,等.1660 mm2碳纤维导线放线用张力机卷筒槽底直径的计算[J].电力科学与工程,2017,33(12):67-72. WAN Jian-cheng, PENG Fei, JIANG Ming, et al. Calculation of bullwheel diameter of tensioner pulling 1660 mm2 carbon fiber conductor[J]. Electric Power Science and Engineering, 2017, 33(12):67-72.
[1] 戚其松,李成刚,董青,陈钰浩,徐航. 起重机生命周期载荷谱预测及基于疲劳寿命的结构优化设计[J]. 工程设计学报, 2023, 30(3): 380-389.
[2] 张正峰,宋小雨,袁晓磊,陈文娟,张伟东. Al/CFRP混合薄壁结构耐撞性能可靠性优化设计[J]. 工程设计学报, 2022, 29(6): 720-730.
[3] 孙光明,王奕苗,万仟,弓堃,汪文津,赵坚. 考虑装配变形的精密机床床身优化设计[J]. 工程设计学报, 2022, 29(3): 318-326.
[4] 陈振, 李涛, 薛晓伟, 周阳, 敬爽, 陈言. 基于模糊综合评价法的可控震源振动器平板疲劳可靠性分析与优化[J]. 工程设计学报, 2021, 28(4): 415-425.
[5] 张锦, 刘佩珊, 殷玉枫. Y形旋转超声波马达的设计与动态特性分析[J]. 工程设计学报, 2021, 28(2): 248-254.
[6] 刘永江, 彭宣霖, 唐雄辉, 李华, 齐紫梅. 轴流散热风机共振失效分析与优化设计[J]. 工程设计学报, 2021, 28(2): 203-209.
[7] 魏巍, 林载盛. 基于RIR-MOO的定制产品优化设计方法研究[J]. 工程设计学报, 2020, 27(5): 592-599.
[8] 孙月海, 唐二星. 弧齿锥齿轮基本参数优化设计[J]. 工程设计学报, 2020, 27(5): 616-624.
[9] 孙世峰, 高常青, 杨波, 徐征和. 基于试验设计与有限元仿真的辐射井水平钻机承载部件优化设计[J]. 工程设计学报, 2019, 26(6): 683-690.
[10] 杨迎新, 周坚, 黄奎林, 任海涛, 陈炼. 定向随钻扩孔PDC钻头优化设计及应用[J]. 工程设计学报, 2018, 25(6): 668-674.
[11] 卢清华, 黄铭贤, 陈为林. 平面阻尼型欠驱动夹持器的多模式参数优化设计[J]. 工程设计学报, 2018, 25(6): 690-696.
[12] 康小云, 翟之平, 巩勇智, 程海鹰, 吴雅梅. 偏心伸缩杆式输送装置输送性能分析与改进[J]. 工程设计学报, 2017, 24(6): 655-660.
[13] 林权, 刘瑞来. 汽车饰盖CAE分析及成型工艺优化[J]. 工程设计学报, 2017, 24(6): 661-667.
[14] 魏新明, 沈平, 单修洋, 李渭松. 基于数值仿真的气动喷射阀回流间隙的优化[J]. 工程设计学报, 2016, 23(3): 244-250.
[15] 张小良，林炜锋. 有限元方法在波形弹片设计中的研究与应用[J]. 工程设计学报, 2015, 22(5): 399-404.