[1] KUMAR R G, REDDY G. Effect of channel dimensions and shape in the flowfield distributor on the performance of polymer electrolyte membrane fuel cells [J]. Journal Power Sources, 2003, 113(1): 1118.
[2] 邓大祥.微尺度热质输运强化槽道多孔结构制造及性能研究[D].广州: 华南理工大学, 2013.
DENG Daxiang. Fabrication and performance of grooved porous structures for micrscale heat and mass transport enhancement [D]. Guangzhou: South China University of Technology, 2013.
[3] PENG Linfa, LIU Fang, NI Jun, et al. Size effects in thin sheet metal forming and its elasticplastic constitutive model [J] Material and Design, 2007, 28(5):17311736.
[4] KAMAL M. A uniform pressure electromagnetic actuator for flat sheet forming [D]. Ohio: The Ohio StateUniversity, 2005.
[5] 李春峰.高能率成形技术[M].北京:国防工业出版社,2001: 6117.
[6] MALA S, VINCENT V J, DAEHN G S. Formability of steel sheet in high velocity impact [J]. Journal of Materials Processing Technology, 2005, 168(3): 390400.
[7] KLEINER M, BEERWALD C, HOMBERG W. Analysis of process parameters and forming mechanisms within the electromagnetic forming process [J]. CIRP Annals: Manufacturing Technology, 2005, 54(1):225228.
[8] 邓江华,王威,江星莹,等.铜箔电磁辅助微冲孔试验[J].塑性工程学报, 2014, 21(3): 5862.
DENG Jianghua, WANG Wei, JIANG Xingying, et al. Experimental investigation on electromagnetic assisted micropiecing of brass foil [J]. Journal of Plasticity Engineering, 2014, 21(3): 5862.
[9] 张敏,陆辛.电磁脉冲驱动力在微成形工艺中的试验研究[J].锻压技术,2009,34(3): 7173.
ZHANG Min, LU Xin. Experimental study on application of electromagnetic pulse force in microforming [J]. Forging and Stamping Technology, 2009, 34(3): 7173.
[10] 郭祎.电磁微成形工艺研究[D].北京:华北电力大学,2009: 3035.
GUO Yi. Research on processing technic of electricmagnetic microforming [D]. Beijing: North ChinaElectric Power University, 2009: 3035.
[11] KAMAL M, SHANG J, CHENG V, et al.Agile manufacturing of a microembossed case by a twostep electromagnetic forming process [J]. Journal of Materials Processing Technology, 2007, 190(13): 4150.
[12] 李娜,莫健华,李奋强,等.铝合金板材电磁脉冲拉深实验与有限元模拟[J].试验研究, 2014(4): 9398.
LI Na, MO Jianhua, LI Fenqiang, et al. Experiment and finite element simulation of electromagnetic pulsed deep drawing process for aluminum alloy sheet [J]. Experiment and Research, 2014(4): 9398.
[13] CUI Xiaohui, MO Jianhua, ZHU Ying. 3D modeling and deformation analysis for electromagnetic sheet forming process [J]. Transactions of Nonferrous Metals Society of China, 2012, 22: 164169.
[14] 成群林,柯映林,董辉跃,等.高速硬加工中切屑成形的有限元模拟[J].浙江大学学报:工学版,2007,41(3): 509513.
CHENG Qunlin, KE Yinglin, DONG Huiyue, et al. Simulation of chip formation in highspeed hard machining [J]. Journal of Zhejiang University: Engineering Science, 2007, 41(3): 509513.
[15] 李强,刘淑莲,应光耀,等.考虑流固耦合作用的PET瓶跌落碰撞数值仿真[J].浙江大学学报:工学版,2012, 46(6): 980986.
LI Qiang, LIU Shulian, YING Guangyao, et al. Numerical simulation for drop impact of PET bottle considering fluidstructure interaction [J]. Journal of Zhejiang University: Engineering Science, 2012, 46(6): 980986.
[16] 彭林法.微/介观尺度下薄板成形建模分析于实验研究[D].上海:上海交通大学,2008: 90111.
PENG Linfa. Modeling, analysis and experimental study of micro/meso scale sheet forming [D]. Shanghai: School of Mechanical Engineering Shanghai, 2008: 90111. |