| ［1］ 庞剑,湛刚.汽车与发动机振动噪声理论与应用［M］.北京： 北京理工大学出版社,2006:1019．
［2］ 李帅.发动机配气机构振动噪声研究［D］.长沙：湖南大学,2012:1117．
LI Shuai.The application research on valve train noise and vibration of automobile engine ［D］.Changsha:Journal of Hunan University,2012:1117．
［3］ 叶慧飞,郝志勇,郭磊,等.几种非对称凸轮型线在下置式凸轮轴高速柴油机中的设计研究［J］.内燃机工程,2010,31（4）:2529．
YE Hui-fei,HAO Zhi-yong, GUO Lei, et al. Design of unsymmetrical cam profiles for a high speed diesel engine with side-Mounted camshaft ［J］.Chinese Internal Combustion Engine Engineering,2010,31（4）:2529．
［4］ 宋立权,唐彬.发动机非对称配气凸轮型线设计研究［J］.内燃机,2005（6）：2830．
SONG Li-quan,TANG Bin.Research and design on unsymmetrical valve-train cam of engines ［J］.Internal Combustion Engines,2005（6）：2830．
［5］ 周睿.柴油机配气机构振动与润滑特性研究［D］.武汉：华中科技大学,2006:2036．
ZHOU Rui.Research on valve train vibration and lubrication characteristics of diesel engine［D］.Wuhan:Journal of Huzhong University of Sciencice and Technology,2006:2036．
［6］ WANG G, TAYLOR D, BOUQUIN B, et al. Prediction of fatigue failure in a camshaft using the crack modeling method ［J］.Engineering Failure Analysis,2000,3:189197．
［7］BAYRAKCEKEN H, UCUN I, TASGETIREN S.Fracture analysis of a camshaft made from nodular cast iron［J］.Engineering Failure Analysis,2006, 13:12401245．
［8］ YU Zhi-wei, XU Xiao-lei.Failure analysis on fractured diesel engine camshafts ［J］.J Fail.Anal.and Preven,2009,9:3942．
［9］ YU Zhi-wei, XU Xiao-lei.Failure analysis of a cracked diesel engine camshafts［J］.J Fail.Anal.and Preven, 2012,12:438442．
［10］ 王远,张家玺,朱会田,等.凸轮轴动力学及多轴疲劳 分析研究［J］.内燃机工程,2010,31（1）:104107．
WANG Yuan,ZHANG Jia-xi,ZHU Hui-tian,et al.Study on dynamics and multi-Axle fatigue analysis of camshaft ［J］.Chinese Internal Combustion Engine Engineering,2010,31（1）:104107．
［11］ 康黎元,司庆九.凸轮轴强度有限元分析［C］∥MSC.Software中国用户论文集,北京:\[s.n.\],2007．
KANG Li-yuan,SI Qing-jiu.Finite element analysis of camshaft strength［C］∥MSC.Software Chinese users symposium.Beijing:\[s.n.\]2007．
［12］ 郭磊，车用动力总成结构振动噪声的虚拟预测与分析技术研究\[D\]：杭州：浙江大学，2009.
GUO Lei.Investigation on powertrain structure’s vibration and nose performance based on virtual foecast techndogy\[D\]. Hangzhou:Zhejiang Uniersity,2009.
［13］ 覃文浩,贺建强,李志辉.基于多体系统动力学的某V型发动机配气机构总成的动态仿真研究［J］.北京理工大学学报,2009,29（10）:869872．
QIN Wen-jie,HE Jian-qiang,LI Zhi-hui.A study on the simulation of valve train assembly of a V-type engine based on multi-body system dynamics ［J］.Transaction of Beijing Institute of Technology,2009,29（10）:869872．
［14］ 雷德发,高志安.浅谈滑动轴承装配间隙的测试与调整［J］.科技创业家,2011（10）：110111．
LEI De-fa,GAO Zhi-an.Test and Adjustment of sliding bearing assembly clearance ［J］.Technological Pioneers,2011,（10）:110111． |
