[1] 柯映林. 反求工程CAD建模理论、方法和系统[M]. 北京: 机械工业出版社,2005:6-7.
[2] SATIO K, MIYOSHI T. Noncontact 3D digitizing and machining system for freeform surface [J]. Annals of the CIRP, 1991,40(1):483-486.
[3] WANG G J, WANG CH CH,CHUANG S H F. Reverse engineering of sculptured surface by fouraxis noncontacting scanning [J]. International Journal of Advanced Manufacturing Technology, 1999, 15(11):800-809.
[4] LI Y D, GU P H. Freeform surface inspection techniques state of the art review [J]. ComputerAided Design, 2004, 36(13): 1395-1417.
[5] FENG H Y, LIU Y X, XI F F. Analysis of digitizing errors of a laser scanning system [J]. Precision Engineering, 2001, 25(3): 185-191.
[6] 徐玉春,谢则晓,冯国馨,等.被测表面特征对激光测头特征的影响[J].天津大学学报,2001,34(6):796-799.
XU Yuchun, XIE Zexiao, FENG Guoxin, et al. Study on influence of surface properties on characteristics of laser triangulation probe [J]. Journal of Tainjing University, 2001,34(6):796-799.
[7] LAI J Y, UENG W D, YAO C Y. Registration and data merging for multiple sets of scan data [J]. International Journal of Advanced Manufacturing Technology, 1999,15(1):54-63.
[8] 谢则晓,张国雄,徐玉春,等.基于PH10回转体的非接触式测量系统建模与标定[J]. 天津大学学报,2001,34(6):714-717.
XIE Zexiao, ZHANG Guoxiong, XU Yuchun, et al. Model and calibration of a noncontact measuring system based on PH10 probe head [J]. Journal of Tainjing University. 2001,34(6):714-717.
[9] 张国雄, 那永林, 郭敬滨, 等. 四发射单接收光学非接触测头[J]. 纳米技术与精密工程, 2006, 4(1): 54-57.
ZHANG Guoxiong, NA Yonglin, GUO Jingbin, et al. A new optical noncontact probe with four incidence lights and a receptor [J]. Nanotechnology and Precision Engineering, 2006, 4(1): 54-57.
[10] 周会成,曾理湛,陈吉红,等.点光源测头光束方向的标定[J].仪器仪表学报,2004, 25(3): 388-391.
ZHOU Huicheng, ZENG Lizhan, CHEN Jihong, et al. Calibration of light beams direction of point light source probe [J]. Chinese Journal of Scientific Instrument, 2004, 25(3): 388-391.
[11] 施法中. 计算机辅助几何设计与非均匀有理B样条[M]. 北京: 高等教育出版社,2001:235-238. |