Please wait a minute...
浙江大学学报(工学版)
JOURNAL OF ZHEJIANG UNIVERSITY (ENGINEERING SCIENCE)  2018, Vol. 52 Issue (10): 1880-1887    DOI: 10.3785/j.issn.1008-973X.2018.10.006
Mechanical and Energy Engineering     
Optimization design to machine tool structures using experimental verification of modal parameters
YING Shen-shun1, LIN Lv-gao2, JI Shi-ming1
1. Ministry of Education Key Laboratory of Special Purpose Equipment and Advanced Processing Technology, Zhejiang University of Technology, Hangzhou 310032, China;
2. Zhejiang CHR Intelligent Equipment Limited Company, Jinyun 321404, China
Download:   PDF(1456KB) HTML
Export: BibTeX | EndNote (RIS)      

Abstract  

A hybrid approach combining experimental tests with finite element (FE) analysis for optimization of the machine tool structures was presented. A FE model of the table base with the real geometry was constructed by considering the table base of a vertical external broaching machine. The deformation and modal parameters were calculated in practical operating conditions. The experimental modal parameters including mode shapes, damping ratio and natural frequencies of the table base were examined in a frequency band of 0-512 Hz by using LMS SCADAS Ⅲ-305 system and PolyMAX method. The modal assurance criterion (MAC) value was used to analyze the correlation between the FE and experimental mode shape. Results indicated a high correlation between the experimental and numerical results. A lightweight table base structure was redesigned with a better dynamic performance from the topology optimization result based on the already correlated FE model, due to lower displacement of broaching machine at force point and higher first order natural frequency.

Received: 01 September 2017      Published: 11 October 2018
CLC:  TH122  
Service
E-mail this article
Add to my bookshelf
Add to citation manager
E-mail Alert
RSS
Articles by authors
Cite this article:

YING Shen-shun, LIN Lv-gao, JI Shi-ming. Optimization design to machine tool structures using experimental verification of modal parameters. JOURNAL OF ZHEJIANG UNIVERSITY (ENGINEERING SCIENCE), 2018, 52(10): 1880-1887.

URL:

http://www.zjujournals.com/eng/10.3785/j.issn.1008-973X.2018.10.006     OR     http://www.zjujournals.com/eng/Y2018/V52/I10/1880


基于模态参数验证的机床结构件优化设计

基于有限元分析和试验测试相结合的方法，研究机床结构件优化设计.以某型号拉床结构3大件之一的床台为例，建立床台实际几何形状的有限元模型，分析床台在实际工况下的变形情况和模态参数.利用LMS SCADAS Ⅲ-305振动测试设备和PolyMAX方法，得到床台在0~512 Hz频率下的自然频率、阻尼比和振型等实验模态参数.获得实验模态与分析模态振型向量的置信准则矩阵，表明有限元分析和实验结果具有较好的相关性.利用经过验证的有限元模型开展拓扑优化，根据优化结果进行床台结构的二次设计.结果表明，通过二次设计得到轻量化的床台结构，切削点处变形更小，第一阶固有频率更大，实现了更好的动态性能.

[1] 叶佩青, 王仁彻, 赵彤, 等. 机床整机动态特性研究进展[J]. 清华大学学报:自然科学版, 2012, 52(12):1758-1763 YE Pei-qing, WANG Ren-che, ZHAO Tong, et al. Recent research advances of whole machine tool dynamics[J]. Journal of Tsinghua University:Science and Technology, 2012, 52(12):1758-1763
[2] ZHAO L, MA J, CHEN W, et al. Lightweight design and verification of gantry machining center crossbeam based on structural bionic[J]. Journal of Bionic Engineering, 2011, 8(2):201-206.
[3] KIM D, JUNG S, LEE J, et al. Parametric study on design of composite-foam-resin concrete sandwich structures for precision machine tool structures[J]. Composite Structures, 2006, 75(1-4):408-414.
[4] HULL P, CANFIELD S. Optimal synthesis of compliant mechanisms using subdivision and commercial FEA[J]. Journal of Mechanical Design, 2006, 128(2):337-348.
[5] 王磊, 刘海涛, 金涛, 等. 一种机床固定结合面形状的拓扑设计方法[J]. 振动工程学报, 2014, 27(4):481-487 WANG Lei, LIU Hai-tao, JIN Tao, et al. A design method of fixed joint contact area topology-based equivalent model for machine tools[J]. Journal of Vibration Engineering, 2014, 27(4):481-487
[6] 戴磊, 关振群, 单菊林, 等. 机床结构三维参数化形状优化设计[J]. 机械工程学报, 2008, 44(5):152-159 DAI Lei, GUAN Zhen-qun, SHAN Ju-lin, et al. 3D parameterized shape optimization design for machine tool mechanism[J]. Chinese Journal of Mechanical Engineering, 2008, 44(5):152-159
[7] ALTINTAS Y, BRECHER C, WECK M, et al. Virtual machine tool[J]. CIRP Annals-Manufacturing Technology, 2005, 54(2):115-138.
[8] LI Bin, CAI Hui, MAO Xin-yong, et al. Estimation of CNC machine-tool dynamic parameters based on random cutting excitation through operational modal analysis[J]. International Journal of Machine Tools and Manufacture, 2013(71):26-40.
[9] ELBESTAWI M A, VELDHUIS S C, DEIAB I M. Development of a novel modular and agile face machining technology[J]. Annals of the CIRP, 2002(49):303-308.
[10] 杨毅青, 刘强, 申江丽, 等. 基于动力学及切削特性耦合的数控机床结构设计[J]. 振动与冲击, 2013, 32(10):198-202 YANG Yi-qing, LIU Qiang, SHEN Jiang-li, et al. Machine tool structure design based on the coupling analysis of dynamics and cutting performances[J]. Journal of Vibration and Shock, 2013, 32(10):198-202
[11] GADE S, M LLER N, HERLUFSEN H, et al. Frequency domain techniques for operational modal analysis[C]//Proceedings of the 1st International Operational Modal Analysis Conference. Copenhagen, Denmark:Springer, 2005.
[12] RAINIERI C, FABBROCINO G. Operational modal analysis of civil engineering structures:an introduction and guide for applications[M]. New York:Springer, 2014:322.
[13] JACOBSEN N J, ANDERSEN P, BRINCKER R. Using enhanced frequency domain decomposition as a robust technique to harmonic excitation in operational modal analysis[C]//Proceedings of International Conference on Noise and Vibration Engineering. Leuven, Belgium:Katholieke Universiteit Leuven Department of Mechanical Engineering, 2006.
[14] BO Z, HAN D, XINJUN S. Modal analysis of board-level electronic package[J]. Microelectronic Engineering, 2008, 85(3):610-620.
[15] 罗震, 陈立平, 黄玉盈, 等. 连续体结构的拓扑优化设计[J]. 力学进展, 2004, 34(4):463-476 LUO Zhen, CHEN Li-ping, HUANG Yu-ying, et al. Topological optimization design for continuum structures[J]. Advances in Mechanics, 2004, 34(4):463-476
[16] 匡兵, 刘娟, 段君伟, 等. 基于改进灵敏度过滤策略的SIMP方法[J]. 计算力学学报, 2017, 34(1):81-87 KUANG Bing, LIU Juan, DUAN Jun-wei, et al. SIMP method based on modified sensitivity filtering strategy[J]. Chinese Journal of Computational Mechanics, 2017, 34(1):81-87
[17] XU Dong-kai, CHEN Jun, TANG Yu-cheng, et al. Topology optimization of die weight reduction for high-strength sheet[J]. International Journal of Mechanical Sciences, 2012(59):73-82.
[1] ZHU Zhuo-yue, XU Zhi-gang, SHEN Wei-dong, YANG De-yu. Selective-disassembly sequence planning based on genetic-bat algorithm[J]. JOURNAL OF ZHEJIANG UNIVERSITY (ENGINEERING SCIENCE), 2018, 52(11): 2120-2127.
[2] LIU Kai, CAO Yi, ZHOU Rui, GE Shu-yi, DING Rui. Modeling and optimizing of one-translational and two-rotational LEMs flexure hinge[J]. JOURNAL OF ZHEJIANG UNIVERSITY (ENGINEERING SCIENCE), 2017, 51(12): 2399-2407.