Please wait a minute...
浙江大学学报(工学版)
JOURNAL OF ZHEJIANG UNIVERSITY (ENGINEERING SCIENCE)  2017, Vol. 51 Issue (11): 2121-2129    DOI: 10.3785/j.issn.1008-973X.2017.11.004
Civil and Traffic Engineering     
Aeroelastic model study of cantilever skywalk bridge
GUI Long-hui1, XIE Ji-ming1, LIN Ying-zi2, ZHANG Hong-wei2
1. College of Civil Engineering and Architecture, Zhejiang University, Hangzhou 310058, China;
2. Lin Yingzi Structure Studio, Architectural Design and Research Institute of Fujian Province, Fuzhou, China
Download:   PDF(4278KB) HTML
Export: BibTeX | EndNote (RIS)      

Abstract  

Conventional theory on wind-induced bridge responses was based on strip assumption which is not applicable to three-dimensional pedestrian bridges in complex wind conditions. A method of using full aeroelastic model was developed for the wind-resistant design of the world longest cantilever skywalk bridge in order to solve the problem. Details of the method include the selection of model design parameters to meet similarity requirements, technological scheme of the model for complex three-dimensional prototype structural systems, and wind tunnel simulation of large angle of attack caused by hilly effects. A design-orientated approach was developed for equivalent static wind load distributions based on load effects. The proposed method was verified to have general applicability to deal with wind effects on three-dimensional bridge structures in complex wind environment. Not only the aerodynamic stability, the design wind loads and the accelerations for wind-resistant design can be reliably estimated, the sensitivity of wind effects on structural properties, which is important for structural optimization design, can also be readily examined with the proposed method.

Received: 24 November 2016      Published: 13 November 2017
CLC:  U448  
Service
E-mail this article
Add to my bookshelf
Add to citation manager
E-mail Alert
RSS
Articles by authors
Cite this article:

GUI Long-hui, XIE Ji-ming, LIN Ying-zi, ZHANG Hong-wei. Aeroelastic model study of cantilever skywalk bridge. JOURNAL OF ZHEJIANG UNIVERSITY (ENGINEERING SCIENCE), 2017, 51(11): 2121-2129.

URL:

http://www.zjujournals.com/eng/10.3785/j.issn.1008-973X.2017.11.004     OR     http://www.zjujournals.com/eng/Y2017/V51/I11/2121


悬挑环形廊桥的气动弹性模型试验

针对目前世界上最大悬挑环形玻璃廊桥的抗风设计，建立针对该类桥梁风效应的全气动弹性模型研究方法，以解决基于片条假定的经典桥梁风振理论无法应用于复杂风场下人行桥梁的三维风响应问题.该方法包括根据相似原理选择模型设计参数、针对复杂原型结构系统进行模型的工艺设计以及在风洞中模拟山地地貌造成的大攻角效应.这一方法还包括一种面向设计的计算方法，能够依据荷载效应求算静力等效风荷载分布.结果表明，提出的全气动弹性模型的试验与分析方法对解决复杂风场下复杂桥梁结构的三维风响应问题具有普遍适用性，不但能够提供满足这类结构抗风设计的气动稳定性、设计风荷载与风振加速度等各项参数，而且能够揭示这类结构风效应对结构参数的敏感度，有助于结构的优化设计.

[1] XIE J, HUNTER M, IRWIN P. Experimental and analytical approaches in wind engineering studies for bridges[C]//Proceedings of IABSE Symposium on "Responding to Tomorrow's Challenges in Structural Engineering". Budapest, Hungary:IABSE. 2006,92(14):9-16.
[2] 项海帆.现代桥梁抗风理论与实践[M].北京:人民交通出版社,2005:50-97.
[3] SIMIU E, SCANLAN R H. Wind effects on structures-fundamentals and applications to design[M]. 3rd Edition, New York:John Wiley & Sons, New York NY, 1996:446-486.
[4] STRØMMEN E N. Theory of brid-ge aerodynamics[M], Berlin Heidelberg:Springer-Verlag, 2006. 91-208.
[5] GE Y, TANAKA H. Aerodynamic flutter analysis of cable-supported bridges by multi-mode and full-mode approaches[J]. Journal of Wind Engineering and Industrial Aerodynamics, 2000, 86(2/3):123-153.
[6] DING Q, CHEN A, XIANG H. Coupled buffeting response analysis of long-span bridges by the CQC approach[J]. Structural Engineering and Mechanics, 2002, 14(5):505-520.
[7] XIE J, YANG D. Wind Engineering Studies for Provencher Pedestrian Bridge[C]//Proceedings of 7th International Conference on Short and Medium Span Bridges. Montreal, Quebec, Canad:CURRAN, 2006,1:203-313.
[8] XIE J, TANAKA H, WARDLAW R L, et al. Buffeting Analysis of long span bridges to turbulent wind with yaw angle[J]. Journal of Wind Engineering and Industrial Aerodynamics, 1991, 37(1):65-77.
[9] DIANA G, CHELI F, ZASSO A, et al. Suspension bridge response to turbulent wind:comparison of a new numerical simulation results with full scale data[C]//Proceedings of 10th International. Conference on Wind Engineering. Copenhagen Denmark:AA Balkema 1999:871-878.
[10] XU Y L, SUN D K, KO J M, et al. Fully coupled buffeting analysis of tsing ma suspension bridge[J]. Journal of Wind Engineering and Industrial Aerodynamics, 2000, 85(1):97-117.
[11] ZHU L D, XU Y L. Buffeting response of long cable-supported bridges under skew winds-part I:Theory[J]. Journal of Sound and Vibration, 2005, 281(3/5):647-673.
[12] BENNISON S J. Designing the Grand Canyon's new laminated glass walkway[R]. Glass performance days, 2007.
[13] 高斐,冯文焕.高墩大跨连续刚构桥气弹模型风洞试验研究[J].现代交通技术,2012,9(5):33-37. GAO Fei, FENG Wen-huan. Long-span continuous rigid frame bridge with high-rise piers gas model wind tunnel test study[J]. Modern Transport Technology, 2012, 9(5):33-37.
[14] 李永乐,郑史雄,廖海黎.泰安长江大桥最大单悬臂状态气弹模型风洞试验研究[C]//中国铁道学会中国交通土建工程学术暨建设成果交流会.成都:铁道学会,2003, 432:26-37. LI Yong-le, ZHENG Shi-xiong, LIAO Li-hai.Taian Yangtze river bridge's largest single cantilever state gas bomb model wind tunnel test research[C]//China Communications Construction of Academic and Civil Engineering of China Railway Society Communication Meeting. cheng du:Railway society, 2003, 432:26-37.
[15] 周健,熊龙,王骑,等.大跨扁平钢箱梁悬索桥全桥气弹模型设计[J].重庆交通大学学报:自然科学版,2014,33(6):1-4. ZHOU Jian, XIONG Long, WANG QI, et al. Large-span flat steel box girder suspension bridge gas model design[J]. Journal of Chongqing Jiao-tong University:Natural Science Edition, 2014, 33(6):1-4.
[16] Canadian Commission of Building and Fire Codes.User's Guide-NBC 2010 Structural Commentaries (Part 4 of Division B)[S]. Ottawa, Canada:NRCC, 2010.
[17] IRWIN P A, GARBER J, HO E. Integration of wind tunnel data with full scale wind climate[C]//Proceedings of 10th Ameri.cas Conference on Wind Engineering. Baton Rouge, Louisiana, USA:ASCE, 2005.
[18] Committee on Loads and Forces of the Committee on Bridges of the Structural. Division. Recommended design loads for bridges[J]. Journal of Structural Division, Proceeding of ASCE, 1981, 107(7):1161-1213.
[1] ZHAO Ren-da, JIA Yi, ZHAN Yu-lin, WANG Yong-bao, LIAO Ping, LI Fu-hai, PANG Li-guo. Seismic mitigation and isolation design for multi-span and long-unit continuous girder bridge inmeizoseismal area[J]. JOURNAL OF ZHEJIANG UNIVERSITY (ENGINEERING SCIENCE), 2018, 52(5): 886-895.
[2] WANG Bing, HUANG Qiao, ZOU Yun, LI Wen-xian. Calculation model of residual bearing capacity for Perfobond connector and experimental verification[J]. JOURNAL OF ZHEJIANG UNIVERSITY (ENGINEERING SCIENCE), 2017, 51(8): 1537-1543.