[1] PODDER T, SIBENAC M, BELLINGHAM J. AUV docking system for sustainable science missions[C]∥Proceedings of IEEE International Conference on Robotics and Automation. New Jersey: IEEE, 2004,5: 4478-4484.
[2] 燕奎臣,吴利红. AUV水下对接关键技术研究 [J]. 机器人, 2007, 29(3): 267-273.
YAN Kui-chen, WU Li-hong. A survey on the key technologies for underwater AUV docking [J]. Robot, 2007, 29(3): 267-273.
[3] MCEWEN R S, HOBSON B W, MCBRIDE L, et al. Docking control system for a 54-cm-diameter (21-in) AUV [J]. IEEE Journal of Oceanic Engineering, 2008, 33(4): 550-562.
[4] SINGH H, BELLINGHAM J G, HOVER F, et al. Docking for an autonomous ocean sampling network [J]. IEEE Journal of Oceanic Engineering, 2001, 26(4): 498-514.
[5] PYLE D, GRANGER R, GEOGHEGAN B, et al. Leveraging a large UUV platform with a docking station to enable forward basing and persistence for light weight AUVs [C]∥OCEANS, New Jersey: IEEE, 2012:18.
[6] 潘光,黄明明,保维,等. AUV 回收技术现状及发展趋势[J]. 鱼雷技术,2008, 16(6): 10-14.
PAN Guang, HUANG Ming-ming, SONG Bao-wei, et al. Current situation and development trend of AUV recovery technology[J]. Torpedo Technology, 2008, 16(6): 10-14.
[7] 张竺英,王棣棠,刘大路. 自治式水下机器人回收系统的研究与设计[J]. 机器人, 1995, 17(6): 348-351.
ZHANG Zhu-ying, WANG Di-tang, LIU Da-lu. The researching and designing of the recovering system for autonomous underwater vehicles[J]. Robtics, 1995, 17(6): 348-351.
[8] CHEN Y, YANG C J, LI D J, et al. Design and application of a junction box for cabled ocean observatories[J]. Marine Technology Society Journal, 2012, 46(3): 50-63.
[9] BARNES C R, BEST M M, ZIELINSKI A. The NEPTUNE Canada regional cabled ocean observatory[J]. Sea Technology, 2008, 49(7) : 10-14.
[10] STOKEY R, ALLEN B, AUSTIN T, et al. Enabling technologies for REMUS docking: an integral component of an autonomous ocean-sampling network[J]. IEEE Journal of Oceanic Engineering, 2001, 26(4): 487-497.
[11] KNEPPER S, NIEMEYER M, GALLETTI R, et al. Eurodocker: a universal docking downloading recharging system for AUVs[C]∥ OCEANS. New Jersey: IEEE, 2001, 3: 1463-1467.
[12]WANG S, SUN X J, WANG Y H, et al. Dynamic modeling and motion simulation for a winged hybrid-driven underwater glider \[J\]. China Ocean Engineering, 2011, 25(1): 97-112.
[13] 林一. 潜艇耐压结构碰撞响应与强度评估方法研究[D]. 哈尔滨: 哈尔滨工程大学, 2009.
LIN Yi. Research of on collision response and strength assessment method for submersible [D]. Harbin: Harbin Engineering University, 2009.
[14] LANKARANI H M, NIKRAVESH P E. A contact force model with hysteresis damping for impact analysis of multibody systems[J]. Journal of Mechanical Design, 1990, 112: 369.
[15] 周志才,吴新跃,张文群,等. 基于弹簧阻尼模型的碰撞动力学研究[J]. 湖北工业大学学报, 2012, 27(1): 125-128.
ZHOU Zhi-cai, WU Xin-yue, ZHANG Wen-qun,et al. Study on contact dynamics based spring-damper mode[J]. Journal of Hubei University of Technology, 2012, 27(1): 125-128.
[16] 李强. 新型类锥杆式对接机构的碰撞过程分析[D]. 长沙: 国防科学技术大学, 2009.
LI Qiang. Collision analysis of a new quasi probe-cone docking mechanism [D]. Changsha: National University of Defense Technology, 2009. |