Please wait a minute...
浙江大学学报(工学版)
J4  2013, Vol. 47 Issue (12): 2101-2110    DOI: 10.3785/j.issn.1008-973X.2013.12.005
    
Strength analysis of a surface mounted high speed permanent magnetic machine rotor with carbon fiber bandage
WANG Bao-jun1, BI Liu-xin2, CHEN Liang-liang1, YANG Ping-xi2, ZHU Chang-sheng1
1. College of Electrical Engineering, Zhejiang University, Hangzhou 310027, China; 2. No.704 Research Institute, China Shipbuilding Industry Corporation, Shanghai 200031,China
Download:   PDF(0KB) HTML
Export: BibTeX | EndNote (RIS)      

Abstract  

For strength analysis of the segmented permanent magnet rotor in a surface mounted high speed permanent magnetic machine, a strength analytical expression was deduced based on the theory of elastic mechanics. The analytical algorithm was applied to calculate the radial stress, tangential stress and equivalent stress in the carbon-fiber bandage, permanent magnets and shaft. Then, the analytical solution was compared with the finite element results. The results show that the proposed analytical solution can accurately predict the stress distribution of the surface mounted and segmented permanent magnet rotor both in stationary state and with high speed, and the error between the analytical results and the finite-element calculation results is very small, completely within the acceptable limits.

Published: 01 December 2013
CLC:  TM 351  
Service
E-mail this article
Add to my bookshelf
Add to citation manager
E-mail Alert
RSS
Articles by authors
Cite this article:

WANG Bao-jun, BI Liu-xin, CHEN Liang-liang, YANG Ping-xi, ZHU Chang-sheng. Strength analysis of a surface mounted high speed permanent magnetic machine rotor with carbon fiber bandage. J4, 2013, 47(12): 2101-2110.

URL:

http://www.zjujournals.com/eng/10.3785/j.issn.1008-973X.2013.12.005     OR     http://www.zjujournals.com/eng/Y2013/V47/I12/2101


碳纤维绑扎表贴式高速永磁电机转子强度分析

针对表贴式高速永磁电机中分块永磁体转子的强度分析问题,基于弹性力学理论,推导了分块永磁体转子强度的解析表达式.采用解析算法计算碳纤维护套、永磁体以及转轴中的径向应力、切向应力和等效应力,并将解析法的计算结果与有限元法的计算结果进行比较.结果表明：转子在静止和高速转动状况下,解析解都能够准确地计算出表贴式分块永磁体转子的应力分布,且解析解与有限元的误差很小,完全在可接受范围之内.

［1］ 黄建民,贾廷纲.稀土永磁电机研究现状与发展［J］.装备机械,2010 (2): 2-5.

HUANG Jian-ming, JIA Yan-gang. Rare-earth permanent magnet motor research and development［J］. Proceedings of the ISBN, 2010(2): 2-5.

［2］ 唐任远.稀土永磁电机发展综述［J］.电气技术,2005(4): 1-6.

TANG Ren-yuan. Rare-earth permanent magnet motor development［J］. Proceedings of the Electrical Technology, 2005 (4): 1-6.

［3］ 唐任远.稀土永磁电机的关键技术与高性能电机开发［J］.沈阳工业大学学报,2005,27(2): 162-166.
TANG Ren-yuan. Research and development of rare-earth permanent magnet machine［J］. Journal of Shenyang University of Technology, 2005, 27(2): 162-166.

［4］ 王继强,王凤翔,鲍文博,等.高速永磁电机转子设计与强度分析［J］.中国电机工程学报,2005, 25(15):  140-145.

WANG Ji-qiang,WANG Feng-xiang, BAO Wen-bo, et al. Rotor design and strength analysis of high speed permanent magnet machine ［ J ］. Proceedings of the CSEE, 2005, 25(15) : 140-145.

［5］ 张旭坡,李勇,肖军,等.磁悬浮电机转子加强环设计及工艺研究［J］.宇航材料工艺,2006(4): 34-35.

ZHANG Xu-po, LI YONG, XIAO jun, et al. Magnetic suspension rotor reinforcing ring design and process technology［J］. Aerospace Materials and Technology, 2006(4): 34-35.

［6］ KOLONDZOVSKI Z, BELAHCEN A, ARKKIO A. Comparative thermal analysis of different rotor types for a high-speed permanent-magnet electrical machine［J］. IET Electric Power Application, 2009, 3(4): 281-283.

［7］ AGLEN O. Loss calculation and thermal analysis of a high-speed generator［J］. Proceedings of IEEE International Electric Machines and Drives Conference, 2003, 20(3): 1117-1121.

［8］ PAULIDES J J H, JEWELL G W, HOWE D. An evaluation of alternative stator lamination materials for a high-speed, 1.5 MW permanent generator［J］. IEEE Transactions on Magnetics, 2004, 40(4): 2041-2043.

［9］ BAILEY C, SABAN D M, GUEDES-PINTO P. Design of high-speed, direct-connected, permanent-magnet motors and generators for the petrochemical industry［J］. IEEE Transactions on Industry Applications, 2009, 45 (3): 1159-1163.

［10］ BINDER A, SCHNEIDER T, KLOHR M. Fixation of buried and surface mounted magnets in high-speed permanent magnet synchronous motors［C］∥ Proceedings of the 2005 Industry Applications Conference in Fourtieth IAS Annual Meeting. Hong Kong: Institute of Electrical and Electronics Engineers Inc, 2005, 4: 2843-2846.

［11］ 郑耀武.电机转子用无纬带绑扎的可靠性分析［J］.大电机技术,1989(3): 20-21.

ZHENG Yao-wu. The reliability analysis of glass fiber type for electrical machine rotor［J］. Large Electric Machine, 1989(3): 20-21.

［12］ 张力,张恒.复合材料汽车零部件设计制造及应用［M］.北京：科学出版社,2010: 101-114.
[1] XUE Shao-shen, XU Hai-ping, FANG Cheng, NIU Wei-kun, XUE Shan. Multiphase permanent magnet synchronous motor harmonic plane control based on carrier technology[J]. J4, 2013, 47(12): 2080-2086.
[2] CUI Wei, GONG Yu, JIANG Jian-zhong, ZHANG Yue-jin, DU Shi-qin. Symmetric design of doubly salient permanent magnet motors[J]. J4, 2011, 45(5): 825-830.
[3] TIAN Zhan-yuan, ZHU Chang-sheng, WANG Ding. Rotor eddy current loss in high speed permanent magnet motors
for flywheel energy storage system[J]. J4, 2011, 45(3): 451-457.
[4] ZHOU Dun-Jie, FAN Cheng-Zhi, XIE Yun-Yue, LEI Qin-Fen. Method for reducing cogging torque based on magnet skewing in
disctype permanent magnet motors[J]. J4, 2010, 44(8): 1548-1552.