Please wait a minute...
浙江大学学报(工学版)
J4  2011, Vol. 45 Issue (6): 1108-1112    DOI: 10.3785/j.issn.1008-973X.2011.06.025
    
Parametric analyse of stress intensity factors of beam-to-column web
connections in steel moment frames
LIU Hong-bo1,2, ZHAI Chang-hai1, XIE Li-li1, SHAO Yong-song1
1. School of Civil Engineering, Harbin Institute of Technology, Harbin 150090, China； 2. School of
Civil Engineering and Architecture, Heilongjiang University, Harbin 150080, China
Download:   PDF(0KB) HTML
Export: BibTeX | EndNote (RIS)      

Abstract  

A method that combined fracture mechanics and finite element was presented to quantify the variation of stress intensity factor to weld root flaw sizes in beam-to-column web connections with extended beam flange plates. Fracture toughness demands of web connections with extended beam flange plates were evaluated in terms of the mode I stress intensity factor. The stress intensity factor was calculated through a J-integral approach. The connection geometry was separately investigated in terms of the beam and column properties by finite element method. The influences of the length of beam and the length of column on the stress intensity factor were analyzed. The fracture toughness demands for the flaw on the top of the beam flange and for the bottom surface were studied, respectively. Finally, formulas for stress intensity factor were derived by orthogonal design and the results of finite element analysis. Results show that the likelihood of top flange fractures is smaller than that of bottom flange fracture. Stress intensity factor increases with the increase of beam parameters and reduces with the increase of column parameters.

Published: 14 July 2011
CLC:  TU 393.2  
  O 346.1  
Service
E-mail this article
Add to my bookshelf
Add to citation manager
E-mail Alert
RSS
Articles by authors
Cite this article:

LIU Hong-bo, ZHAI Chang-hai, XIE Li-li, SHAO Yong-song. Parametric analyse of stress intensity factors of beam-to-column web
connections in steel moment frames. J4, 2011, 45(6): 1108-1112.

URL:

https://www.zjujournals.com/eng/10.3785/j.issn.1008-973X.2011.06.025     OR     https://www.zjujournals.com/eng/Y2011/V45/I6/1108


腹板连接节点焊缝应力强度因子的参数分析

为定量的确定荷载作用下钢框架结构延长翼缘连接板梁柱腹板连接节点焊缝应力强度因子的大小,采用断裂力学与有限元积分相结合的方法，研究腹板连接节点的断裂性能.判断延长翼缘连接板腹板连接节点焊缝开裂的依据是Ⅰ型应力强度因子,应力强度因子可以通过有限元计算J积分的方法求得.通过有限元计算分析了初始裂纹深度、梁截面尺寸、柱截面尺寸和梁柱长度对延长翼缘连接板腹板连接节点焊缝应力强度因子的影响.采用正交设计法进行研究方案设计,根据有限元分析结果归纳出应力强度因子计算公式.研究结果表明：延长翼缘连接板腹板连接节点梁下翼缘焊缝比上翼缘更容易开裂,应力强度因子随梁截面参数的增大而增大,随柱截面参数的增大而减小.

［1］ TERRENCE F P. The W1 issue. I: extent of weld fracturing during Northridge earthquake［J］. Journal of Structural Engineering， 2000, 122(1): 10-18.
［2］ 李国强.多高层建筑钢结构设计［M］.北京：中国建筑工业出版社,2004: 15-60.
［3］ UANG C M, YU Q S, SADRE A, et al. Seismic response of an instrumented 13story steel frame building damaged in the 1994 Northridge Earthquake ［J］. Earthquake Spectra, 1997, 13(1): 131-149.
［4］ 刘洪波,谢礼立,邵永松.钢框架节点焊缝应力强度因子的参数分析［J］.浙江大学学报：工学版,2007,41(1): 40-43.
LIU Hongbo,XIE Lili, SHAO Yongsong. Parametric studies of stress intensity factors with varied steel frame connection geometry ［J］. Journal of Zhejiang University： Engineering Science, 2007, 41(1): 40-43.
［5］ 王万祯,顾强.钢框架梁柱栓焊节点的有限元分析［J］.建筑结构，2002,32(9): 7-10.
WANG Wanzhen, GU Qiang. Finite element analysis on fracture mechanism of rigided beamcolumn connections in steel frames ［J］. Building Structure, 2002, 32(9): 7-10.
［6］ BINNUR G K, SECIL E. Prediction of fracture behavior of steel beamtocolumn connections with weld defect using the SINTAP［J］. Engineering Structures, 2005, 27(1): 760-768.
［7］ 郭秉山,顾强,李养成.钢框架梁柱腹板连接梁翼缘对接焊缝的破坏机理［J］.西安建筑科技大学学报,2004,24(4): 417-421.
GUO Bingshan, GU Qiang, LI Yangcheng. Fracture mechanism of butt welding in beamcolumn web connections of steel moment frames ［J］. Journal of Xi’an University of Science & Technology, 2004, 24(4): 417-421.
［8］ CHEN W R, LIU E M. Static web moment connections［J］. Journal of Construct Steel Research, 1988, 10(1): 89-131.
［9］ CHEN W F, LIU E M. Steel beamtocolumn moment connections, Part B: Web Moment Connections［J］. Solid Mechanics Archives, 1987, 12(1): 1-52.
［10］ CHI W M, DEIERLEIN G G， INGRAFFEA A R. Fracture toughness demands in welded beamcolumn moment connections［J］. Journal of Structural Engineering, 2000, 126(1): 88-97.
［11］ LIU Hongbo, ZHAI Changhai, SHAO Yongsong, et al. Finite element fracture mechanics study of PreNorthridge connections［J］. Key Engineering Materials, 2006, 325(2): 1007-1010.
［12］ 方开泰,马长兴,李长坤.正交设计的最新发展和应用回归分析在正交设计的应用［J］.数理统计与管理,1999,18(2): 44-49.
FANG Kaitai, MA Changxing, LI Jiukun. Recent development of orthogonal factorial designs and their applications［J］. Application of Statistics and Management,1999, 18 (2): 44-49.
No related articles found!