[1] BAI Yong, BAI Qiang. Subsea pipelines and risers [M]. Oxford: Elsevier Science Ltd, 2005: 4165.
[2] BAI Yong, IGLAND R T, MOAN T. Tube collapse under combined external pressure, tension and bending [J]. Marine Structure, 1997, 10(5): 389410.
[3] KYRIAKIDES S, CORONA E. Mechanics of offshore pipeline [M]. Oxford: Elsevier Science Ltd, 2007: 225238.
[4] 周承倜,马良.海底管道屈曲及其传播现象[J].中国海上油气(工程),1994,6(6): 18.
ZHOU Chengti, MA Liang. Buckle of subsea pipeline and its propagation [J]. China Offshore Oil & Gas Engineering, 1994, 6(6): 18.
[5] 宋甲宗,戴英杰.海洋管道铺设时的二维静力分析[J].大连理工大学学报,1999,39(1): 9194.
SONG Jiazong, DAI Yingjie. 2D static analysis of submarine pipelines during pipelaying [J]. Journal of Dalian University of Technology, 1999, 39(1): 9194.
[6] PALMER A C, HUTCHINSON G, ELLS J W. Configuration of submarine pipelines during laying operations [J]. Journal of Engineering for Industry, 1974, 96(11): 11121118.
[7] 曾晓辉,柳春图,邢静忠.海底管道铺设的力学分析[J].力学与实践,2002,24(2): 1921.
ZENG Xiaohui, LIU Chuntu, XING Jingzhong. Mechanical analysis of pipelaying [J]. Mechanics in Engineering, 2002, 24(2): 1921.
[8] 闫澍旺,肖智旺,田英辉.单层保温管海底管线在铺设状态的层间剪力分析[J].海洋技术,2005,24(2): 8992.
YAN Shuwang, XIAO Zhiwang, TIAN Yinghui. Intersurface shear stress analysis for ocean pipelines with heat preservation foam [J]. Ocean Technology, 2005, 24(2): 8992.
[9] 金伟良.工程荷载组合理论与应用[M].北京:机械工业出版社, 2006: 103118.
[10] 孙炳楠,洪滔,杨骊先.工程弹塑性力学[M].杭州:浙江大学出版社,1998: 112119.
[11] MOHAREB M. Plastic interaction relations for pipe sections [J]. Journal of Engineering Mechanics, 2002, 128(1): 112120.
[12] HAUCH R S, BAI Yong. Bending moment capacity of pipes [J]. Journal of Offshore Mechanics and Arctic Engineering, 2000, 122(4): 243252.
[13] GU Yongning. Analysis of pipeline behaviours during laying operation [J]. China Ocean Engineering, 1989, 3(4): 477486.
[14] 周俊.深水海底管道S型铺管形态及施工工艺研究[D].杭州:浙江大学,2008.
ZHOU Jun. Investigation on configuration and construction technics of Slay for deepwater submarine pipelines [D]. Hangzhou: Zhejiang University, 2008.
[15] API Specification 5L: specification for line pipe [S]. Washington, D.C.: American Petroleum Institute, 2000. |