Please wait a minute...
J4  2009, Vol. 43 Issue (10): 1864-1869    DOI: 10.3785/j.issn.1008-973X.2009.10.021
    
Purchasing tasks allocation in electronics manufacturing supply chain
ZHU Yong, PAN Xiao-hong, WANG Zheng-xiao
(Institute of Manufacturing Engineering, Zhejiang Province Key Laboratory of Advanced Manufacturing Technology, Zhejiang University, Hangzhou 310027,China)
Download:   PDF(1344KB) HTML
Export: BibTeX | EndNote (RIS)      

Abstract  

To allocate purchasing tasks among multiple suppliers for obtaining lowest total cost by combining features of purchasing electronic components under multiple suppliers environment and typical features in electronics manufacturing, four types of supplier coordination pattern were proposed: continuous replenishment, ordinary cooperation, supply orders and close cooperation. According to these suppliers, two allocation patterns considering cost or delivery date as top priority were proposed. Two models of purchasing tasks allocation in electronics manufacturing supply chain considering the total cost of products were constructed, and corresponding algorithms were constructed based on the two predetermined policy. Then a practical application verified the model of purchasing tasks allocation and illuminated this algorithm. Results showed the maximum guarantee of delivery rate on time and the cost-effectiveness of this strategy.



Published: 29 November 2009
CLC:  TP 391  
Cite this article:

CHU Yong, BO Xiao-Hong, WANG Zheng-Xiao. Purchasing tasks allocation in electronics manufacturing supply chain. J4, 2009, 43(10): 1864-1869.

URL:

http://www.zjujournals.com/eng/10.3785/j.issn.1008-973X.2009.10.021     OR     http://www.zjujournals.com/eng/Y2009/V43/I10/1864


电子制造供应链采购任务分配

为了能在多供应商之间分配采购任务使双方整体效益达到最优,结合电子制造业典型特点和多供应商环境下电子元器件采购特征,提出了4种不同类型的供应商协作模式:连续补给型、一般协作型、订货供给型和紧密协作型.主要针对一般协作型、订货供给型和紧密协作型3种类型供应商,采用两种不同的任务分配策略:成本优先控制策略和交货期优先控制策略,分别建立电子制造供应链采购任务分配模型,同时考虑产品总的采购成本,基于两种分配策略构造了采购任务分配算法.通过计算一个实例来验证采购任务分配模型和说明该算法是如何求解问题的,结果表明,准时交货率得到最大保证,而成本得到有效降低.

[1] LOU P, ZHOU Z D, CHEN Y P, et al. Negotiation-based task allocation in an open supply chain environment [J]. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 2006, 220(6): 975985.
[2] 关志民,周宝刚,马钦海. 多产品采购条件下的供应商选择与订购量分配问题研究[J]. 计算机集成制造系统:CIMS, 2005, 11(11): 16261632.
GUAN Zhi-min, ZHOU Bao-gang, MA Qin-hai. Research on vendor selection and order quantity allocation problem under multi-product purchases [J]. Computer Integrated Manufacturing Systems, 2005, 11(11): 16261632.
[3] KAWTUMMACHAI R, VAN HOP N. Order allocation in a multiple-supplier environment [J]. International Journal of Production Economics, 2005, 93-94: 231238.
[4] DAHEL N E. Vendor selection and order quantity allocation in volume discount environments [J]. Supply Chain Management: An International Journal, 2003, 8(4): 335342.
[5] 黄爱华,叶飞. 虚拟企业的任务分配与协调技术[J]. 华南理工大学学报: 自然科学版, 2002, 30(5): 14.
HUANG Ai-hua, YE Fei. Task allocation and harmonizing of virtual enterprise [J]. Journal of South China University of Technology: Natural Science, 2002, 30(5): 14.
[6] 刘海龙,吴铁军. 基于合同网的多agent任务分配分布式优化算法[J]. 浙江大学学报: 工学版, 2001, 35(5): 550554.
LIU Hai-long, WU Tie-jun. Distributed algorithm for task allocation in multi-agent system based on contract net [J]. Journal of Zhejiang University: Engineering Science, 2001, 35(5): 550554.
[7] 谢经明,娄平,陈幼平,等. 供应链中基于多Agent协商的任务分配机制的研究[J]. 中国机械工程, 2005, 16(21): 19111915.
XIE Jing-ming, LOU Ping, CHEN You-ping, et al. Research on mechanism of task allocation in based on multi-agent negotiation supply chain [J]. China Mechanical Engineering, 2005, 16(21): 19111915.

[1] ZHAO Jian-jun, WANG Yi, YANG Li-bin. Threat assessment method based on time series forecast[J]. J4, 2014, 48(3): 398-403.
[2] ZHANG Tian-yu, FENG Hua-jun, XU Zhi-hai, LI Qi, CHEN Yue-ting. Sharpness metric based on histogram of strong edge width[J]. J4, 2014, 48(2): 312-320.
[3] LIU Zhong, CHEN Wei-hai, WU Xing-ming, ZOU Yu-hua, WANG Jian-hua. Salient region detection based on stereo vision[J]. J4, 2014, 48(2): 354-359.
[4] CUI Guang-mang, ZHAO Ju-feng,FENG Hua-jun, XU Zhi-hai,LI Qi, CHEN Yue-ting. Construction of fast simulation model for degraded image by inhomogeneous medium[J]. J4, 2014, 48(2): 303-311.
[5] WANG Xiang-bing,TONG Shui-guang,ZHONG Wei,ZHANG Jian. Study on  scheme design technique for hydraulic excavator's structure performance based on extension reuse[J]. J4, 2013, 47(11): 1992-2002.
[6] WANG Jin, LU Guo-dong, ZHANG Yun-long. Quantification-I theory based IGA and its application[J]. J4, 2013, 47(10): 1697-1704.
[7] LIU Yu, WANG Guo-jin. Designing  developable surface pencil through  given curve as its common asymptotic curve[J]. J4, 2013, 47(7): 1246-1252.
[8] HU Gen-sheng, BAO Wen-xia, LIANG Dong, ZHANG Wei. Fusion of panchromatic image and multi-spectral image based on
SVR and Bayesian method 
[J]. J4, 2013, 47(7): 1258-1266.
[9] WU Jin-liang, HUANG Hai-bin, LIU Li-gang. Texture details preserving seamless image composition[J]. J4, 2013, 47(6): 951-956.
[10] CHEN Xiao-hong,WANG Wei-dong. A HDTV video de-noising algorithm based on spatial-temporal filtering[J]. J4, 2013, 47(5): 853-859.
[11] ZHU Fan , LI Yue, JIANG Kai, YE Shu-ming, ZHENG Xiao-xiang. Decoding of rat’s primary motor cortex by partial least square[J]. J4, 2013, 47(5): 901-905.
[12] WU Ning, CHEN Qiu-xiao, ZHOU Ling, WAN Li. Multi-level method of optimizing vector graphs converted from remote sensing images[J]. J4, 2013, 47(4): 581-587.
[13] JI Yu, SHEN Ji-zhong, SHI Jin-he. Automatic ocular artifact removal based on blind source separation[J]. J4, 2013, 47(3): 415-421.
[14] WANG Xiang, DING Yong. Full reference image quality assessment based on Gabor filter[J]. J4, 2013, 47(3): 422-430.
[15] TONG Shui-guang, WANG Xiang-bing, ZHONG Wei, ZHANG Jian. Dynamic optimization design for rigid landing leg of crane
based on BP-HGA
[J]. J4, 2013, 47(1): 122-130.