Please wait a minute...
浙江大学学报(工学版)
J4  2011, Vol. 45 Issue (11): 1948-1952    DOI: 10.3785/j.issn.1008-973X.2011.11.010
机械工程     
高氮合金钢高应变率剪切性能测试
陈小安1，邵冰莓1，宋顺成1,2，王庭辉1
1.西南交通大学 力学与工程学院, 四川 成都 610031; 2. 冲击环境材料技术国家级重点实验室, 山东 烟台 264003
Measurements of shearing property of high N alloy steel
at super high strain rates
CHEN Xiao-an1, SHAO Bing-mei1, SONG Shun-cheng1,2, WANG Ting-hui1，
1.Southwest Jiaotong University, School of mechanics and engineering, Chengdu, 610031, Sichuan, China;
2. National key laboratory of science and technology on materials in impact environment, Yantai, 264003, Shandong, China
 全文: PDF  HTML
摘要：

为了研究高应变率条件下高氮合金钢的剪切性能,用改装的Hopkinson压杆装置对高氮合金钢进行冲塞剪切测试.通过分析给出不同应变率条件下2种类型的高氮合金钢的剪切应力应变关系,从而研究材料的抗剪切强度和冲塞过程中局部剪切能量,并在位错动力学Seeger方程基础上提炼出高氮合金钢的动态剪切损伤本构关系,采用曲线拟合的方法拟合出不同材料参数.结果表明,改装的Hopkinson压杆装置能够有效地测试高氮合金钢高应变率剪切性能,2种类型的高氮合金钢的剪切强度均表现为正应变率效应,损伤积累阶段,材料耗能几乎呈线性增长,材料剪切损伤模型能够模拟高氮合金钢剪切性能的应变率效应.
Abstract:

In order to obtain the dynamic shearing property of high N alloy steel, the plugging test was performed by using the improved Hopkinson pressure bar system. The dynamic shearing strengths and dynamic shearing deformed energies during plugging process were determined from the shearing stress-strain relationship at different super high strain rates. A dynamic shearing damage constitutive relationship was established based on the Seeger dislocation dynamics theory and the parameters in the equation were determined by using the curve fitting method. The results show that the dynamic shearing property of high N alloy steel could be obtained by the improved Hopkinson pressure bar system. These two type high N alloy steels have a kind of positive strain rate effect. The dissipation energy increases almost linearly with time at the damage accumulation stage, and the strain rate effect of dynamic shearing property could be described by dynamic shearing damage constitutive relationship.
出版日期: 2011-12-08
:  O 347.3  
基金资助:

国家自然科学基金资助项目（50874095）.
通讯作者: 宋顺成，男，教授，博导.     E-mail: song_sc@163.com
作者简介: 陈小安（1985-），男，博士生，从事高速冲击动力学方向的研究.E-mail：chenxiaoan0218@163.com
服务　　
把本文推荐给朋友
加入引用管理器
E-mail Alert
作者相关文章　　

引用本文:

陈小安，邵冰莓，宋顺成，王庭辉. 高氮合金钢高应变率剪切性能测试[J]. J4, 2011, 45(11): 1948-1952.

CHEN Xiao-an, SHAO Bing-mei, SONG Shun-cheng, WANG Ting-hui. Measurements of shearing property of high N alloy steel
at super high strain rates. J4, 2011, 45(11): 1948-1952.

链接本文:

https://www.zjujournals.com/eng/CN/10.3785/j.issn.1008-973X.2011.11.010    或    https://www.zjujournals.com/eng/CN/Y2011/V45/I11/1948

［1］ GARRILJUK V G,SOZINOV A L,FOCT J,et al. Effect nitrogen on the temperature dependence of the yield strength of austenitic steels ［J］. Acta Materialia. 1998,46(4):1157-1163.
［2］ LACH E, KOERBER G, SCHARF M, et al. Comparison of nitrogen alloyed austenitic steels and high strength armor steels impacted at high Velocity ［J］.International Journal of Impact Engineering. 1999,23(2):509-517．
［3］ 范亚夫,段祝平. JohnsonCook材料模型参数的实验测定［J］. 力学与实践. 2003,25(5): 40-43．
FAN Yafu,DUAN Zhuping.Cylinder explosive test and material model of JohnsonCook ［J］. Mechanics in Engineering. 2003,25(5):40-43．
［4］ 刘盼萍,尹燕,常列珍，等. 正火态50SiMnVB钢JohnsonCook本构方程的建立［J］. 兵器材料科学与工程. 2009,32(1):45-49．
LIU Panping,YIN Yan, CHANG Liezhen, et al. Establishing of JohnsonCook constitutive equation for normalized steel 50SiMnVB ［J］. Ordnance Material Science and Engineering. 2009,32(1):45-49．
［5］ HAO Siangyang, GAIN Guosheng, LU Fangyun， et al. Dynamic mechanical properties of whisker PA66 composites at high strain rates ［J］. Polymer, 2005,46(10):3528-3534．
［6］ BELYAEV S, PETROV A, RAZOV A, et al. Mechanical properties of titanium nickelide at high strain rate loading ［J］. Materials Science and Engineering A, 2004,378(1):122-124．
［7］ 张志云.兵器金属材料在大应变高应变率下的动力学行为研究［J］. 兵器材料科学与工程.1990,1(1):64-71．
ZHANG Zhiyun. Studies on the dynamic behavior at high strain and high strain rate of ordnance steel materials ［J］. Ordnance Material Science and Engineering. 1990,1(1): 64-71．
［8］ 樊存山,田时雨. 用SHPB装置对装甲钢冲塞破坏过程的动力学测定［J］. 兵器材料科学与工程.1994, 3(17):18-22．
FAN Cunshan, TIAN Shiyu. Dynamic testing of armour plugging process using SHPB apparatus ［J］. Ordnance Material Science and Engineering. 1994,3(17):18-22．

［9］ DOWLING A R, HARDING J,CAMPBELL J D. The dynamic punching of metals［J］. Journal Institute of Metals, 1970,98(1): 215-224．
［10］ SEEGER A. The generation of lattice defects by moving dislocations, and its application to the temperature dependence of the flowstress of FCC crystals ［J］. Philosophical Magazine.1955, 46(382):1194-1217．
［11］ MARC M. Dynamic behavior of Materials［M］. New York: A WileyInterscience Publication, 1994:330-331．
［12］ 王礼立,蒋绍镳,陈江瑛. 材料微损伤在高速变形中的演化及其对率型本构关系的影响［J］. 宁波大学学报.1996,9(3):47-55．
WANG Lili, JIANG Zhaobiao, CHEN Jiangying. Microdamage evolution in high velocity deformation and its influence on ratedepandent constitutive relation of materials ［J］. Journal of Ningbo University. 1996,9(3):47-55．
［13］ 施绍裘,王永忠,王礼立 .国产C30混凝土考虑率型微损伤演化的改进JonsonCook强度模型［J］. 岩石力学工程学报. 2006,25(1):3251-3257．
SHI Shaoqiu, WANG Yongzhong, WANG Lili. Improved JohnsonCooks strength model taking account of ratedependent microdamage evolution for domestic C30 concrete ［J］. Chinese Journal of Rock Mechanics and Engineering. 2006,25(1):3251-3257．
［14］ 赵荣国. 含损伤非线性粘弹性材料本构理论研究［D］. 湘潭大学. 2001．
ZHAO Rongguo. Studies on the constitutive theory for nonlinear viscoelastic material with damage ［D］. Xiangtan University.2001．
［15］ KOBAYASHI H, DODD B. A numerical analysis for the formation of adiabatic shear bands including void nucleation and growth ［J］. International Journal of Impact Engineering. 1989,8(1):1-13．
［16］ 宋顺成,王明超,刘筱玲，等. 陶瓷材料动态抗弯性能测试［J］. 爆炸与冲击. 2009,29(2):167-171．
SONG Shuncheng, WANG Mingchao, LIU Xiaoling et al. Measurements of dynamic antibending properties of ceramics ［J］. Explosion and Shock Waves. 2009,29(2):167-171．
No related articles found!