[1] 焦生杰.国内外平地机发展现状与新技术[J].筑路机械与施工机械化,2003,(03): 10-17. JIAO Shengjie.New technology and development situation of grader [J].Road Machinery & Construction Mechanization,2003,(03): 10-17. [2] ANDRZEJ S,GRZEGORZ T.Grader blade stabilization system [J].Automation in Construction,1998,7(5):385-389. [3] JOHN C,RAYMOND A.Slope controls: US,3561538 [P].1971-02-09. [4] WILLIAN R,TILLMAN.Blade control apparatus of a motor grader including wand vibration damping element: US,4009758 [P]. 1977-05-01. [5] 余波.PY165A型平地机的位置分析及运动仿真[D].成都:四川大学,2001. YU Bo.Position analysis and motion simulation of PY165A blade grader [D].Chengdu: Sichuan University,2001. [6] 甘建国,李锦阳,朱春灿,等.应用I_DEAS软件对平地机进行机构仿真[J].建设机械技术与管理,2005,(01): 85-89. GAN Jianguo, LI Jinyang, ZHU Chuncan, et al.Mechanism simulation of grader by IDEAS software [J].Technology & Management for Construction Machinery,2005,(01): 85-89. [7] 成凯,吴守强,李相锋.推土机与平地机[M].北京:化学工业出版社,2006: 155-156. [8] 黄真,赵永生,赵铁石.高等空间机构学[M].北京:高等教育出版社,2006: 115-158. [9] 赵云峰,程丽,赵永生.3UPS/S并联机构运动学分析及机构优化设计[J].机械设计,2009,26(1): 46-49. ZHAO Yunfeng,CHENG Li,ZHAO Yongsheng.Kinematic analysis of 3UPS/S parallel mechanism and its optimization design[J].Journal of Machine Design,2009,26(1): 46-49. [10] 王宣银,程佳.4TPS_1PS四自由度并联电动平台动力学建模与位姿闭环鲁棒控制[J].浙江大学学报:工学版,2009,43(8): 1492-1496. WANG Xuanyin,CHENG Jia.Dynamic modeling and robust control in task space of 4DOF parallel electric platform with 4 TPS1PS structure[J].Journal of Zhejiang University: Engineering Science,2009,43(8): 1492-1496. [11] 夏天.工业机器人运动学标定及误差分析研究[D].上海:上海交通大学,2009. XIA Tian.Research of kinematic calibration and error analysis for industrial robot [D].Shanghai: Shanghai Jiao Tong University,2009. [12] 丛大成,于大泳,韩俊伟.Stewart平台的运动学精度分析和误差补偿[J].工程设计学报,2006,13(3):162-165. CONG Dacheng,YU Dayong,HAN Junwei.Kinematics accuracy analysis and error compensation of Stewart platform[J].Journal of Engineering Design, 2006, 13(3): 162-165. [13] YANG G L,HO EHL,LIN W,et al.A differential geometry approach for the workspace analysis of spherical parallel manipulators [C]∥ 11th World Congress in Mechanism and Machine Science.Tianjin: China Machinery Press,2004,(04): 2060-2065. |