Please wait a minute...
浙江大学学报(工学版)
J4  2011, Vol. 45 Issue (5): 858-863    DOI: 10.3785/j.issn.1008-973X.2011.05.014
机械工程     
负载口独立控制负载敏感系统模式切换特性
徐兵,曾定荣,葛耀峥,刘英杰
浙江大学 流体动力与机电系统国家重点实验室,浙江 杭州 310027
Research on characteristic of mode switch of separate meter in
and meter out load sensing control system
XU Bing, ZENG Ding-rong, GE Yao-zheng, LIU Ying-jie
State Key Laboratory of Fluid Power Transmission and Control, Zhejiang University, Hangzhou 310027, China
 全文: PDF  HTML
摘要：

传统负载敏感系统在多执行器复合运动而执行器负载差别较大时系统效率低,为改善系统效率,研究新型负载口独立控制负载敏感系统模式切换控制器的设计方法.通过理论推导对比承受轻、重负载执行器支路在不同工作模式下的能耗特性, 以减少系统能耗为准则得出不同支路的工作模式选择标准及模式切换的控制方法,并通过实验方式验证所提出的模式切换方法的有效性.模式切换控制实验中执行器速度控制平稳,背腔压力波动小而且维持在低压值,改善了系统的节能性能.研究结果表明,模式切换方法切实可行,负载口独立负载敏感系统在保证系统速度控制特性的前提下,能够进一步提高系统的节能性能.
Abstract:

Conventional Load Sensing (LS) system has low efficiency when multiple actuators with different loads are in motion simultaneously, in order to improve system efficiency, the work mode switch controller of a novel separate meter in and separate meter out (SMISMO) LS system was studied. The characteristics of energy consumption and velocity control in different work modes for heavy load actuator and light load actuator were compared through theoretical derivation, and work mode selection criterion and work mode switch controller for corresponding actuators were designed with aim to reduce energy consumption, experiments were carried on to test the effectiveness of the designed mode switch controller. The oscillations of velocity and back chamber pressure are low during mode switch process, back chamber pressure is maintained at low value to improve energy saving characteristic. Obtained results show that the work mode switch controller is feasible, and SMISMOLS system can further improve energy saving characteristic while retaining good velocity control characteristic．
出版日期: 2011-11-24
:  TH 137.5  
基金资助:

国家自然科学基金资助项目（50675203）， 国家863”高技术研究发展计划资助项目(2007AA041803)，国家“十一五”科技支撑计划资助项目（2006BAF01B03-01）.
作者简介: 徐兵（1971-），男，辽宁鞍山人，教授，从事机电控制、流体动力元件与系统的教学科研工作. E-mail: bxu@zju.edu.cn
服务　　
把本文推荐给朋友
加入引用管理器
E-mail Alert
作者相关文章　　

引用本文:

徐兵,曾定荣,葛耀峥,刘英杰. 负载口独立控制负载敏感系统模式切换特性[J]. J4, 2011, 45(5): 858-863.

XU Bing, ZENG Ding-rong, GE Yao-zheng, LIU Ying-jie. Research on characteristic of mode switch of separate meter in
and meter out load sensing control system. J4, 2011, 45(5): 858-863.

链接本文:

https://www.zjujournals.com/eng/CN/10.3785/j.issn.1008-973X.2011.05.014    或    https://www.zjujournals.com/eng/CN/Y2011/V45/I5/858

［1］ BACK W. Design systematic and performance of cartridge valve controls ［C］∥International Conference on Fluid Power.Tampere, Finland:［s.n.］, 1987, 3: 1-48.
［2］ JANSSON A, PALMBERG J O. Separate controls of meterin and meterout orifices in mobile hydraulic systems ［J］. SAE Transactions, 1990, 99(2):377-383．
［3］ ELFVING M. A concept for a distributed controller of fluid power actuators ［D］. Sweden: Linkping University, 1997．
［4］ BOOK R, GOERING C E. Programmable electrohydraulic valve ［J］. SAE Transactions, 1999, 108(2): 346-352.
［5］ ANDERSEN T O, MNZER M E, HANSE M R. Evaluation of control strategies for separate meterin separate meterout hydraulic boom actuation in mobile applications ［C］∥The 17th International Conference on Hydraulic and Pneumatics. Ostrava, Czech Republic:［s.n.］,2001, 1:475-450．
［6］ YAO B, SONG L. Energysaving control of hydraulic systems with novel programmable valves ［C］∥ Proceedings of the 4th World Congress on Intelligent Control and Automation, Shanghai：［s.n.］, 2002:81-91．
［7］ 顾临怡.大惯性负载进出口独立调节数字控制及多执行器复合控制研究 ［D］. 杭州: 浙江大学,1998．
GU Linyi. Research on the independently regulation digital control of the big inertia load import and export multiexecutor mixed control ［D］. Hangzhou: Zhejiang University,1998．
［8］ HU H, ZHANG Q. Multifunction realization using an integrated programmable E/H control valve ［J］. Applied Engineering in Agriculture, 2003, 19(3): 283-290．
［9］ 姚静. 多功能组合阀及其控缸特性的理论与实验研究［D］. 秦皇岛: 燕山大学, 2003.
YAO Jing. Theory and experiment research of multifunction programmable valve and valve control cylinder system ［D］. Qing Huang dao: Yanshan University, 2003．
［10］ 权龙, 廉自身. 应用进出油口独立控制原理改善泵控差动缸的系统效率［J］. 机械工程学报,2005, 42(3):123-127．
QUAN Long, LIAN Zisheng. Improving the efficiency of pump controlled differential cylinder system with inlet and outlet separately controlled principle ［J］. Chinese Journal of Mechanical Engineering, 2005, 42(3):123-127．
［11］ XU Bing, LIU Yingjie, YANG Huayong, et al. Simulation study of the novel valve arrangement used in hydraulic control system ［C］∥ The Sixth International Fluid Power Conference. Dresden, Germany:2008, Workshop, Group B: 139-146．
［12］ LIU Yingjie, XU Bing, YANG Huayong, et al. Modeling of separate meter in and separate meter out control system ［C］∥Proceedings of The 2009 IEEE/ASME Conference on Advance Intelligent Mechatronics. Singapore: IEEE/ASME, 2009, 1:227-237．
No related articles found!