Please wait a minute...
浙江大学学报(工学版)
浙江大学学报(工学版)
机械工程     
考虑Sobol缺陷敏感度的抗恶劣环境结构设计方法
尹娇妹, 赵昕玥, 张树有
浙江大学 流体动力与机电系统国家重点实验室 机械工程学院,浙江 杭州 310027
Method for designing parts structure to resist harsh environments considering sobol defects sensitivity
YIN Jiao-mei, ZHAO Xin-yue, ZHANG Shu-you
State Key Laboratory of Fluid Power Transmission and Control, School of Mechanical Engineering, Zhejiang University, Hangzhou 310027, China
 全文: PDF(1108 KB)   HTML
摘要：

针对关键零部件结构中一些部位在缺陷对零部件结构的诱变过程中出现过损害现象造成零部件提前报废的问题,提出一种基于sobol缺陷敏感度的结构细节设计分析方法.在关键零部件结构设计的基础上,引入缺陷模型,模拟缺陷对结构的侵袭及迁移过程,以满足结构全局强度为指标,基于sobol缺陷敏感度分析,利用缺陷参数影响零部件结构强度指标程度分离筛选出结构过损害部位,依据较大灵敏度参数选择性的选取优化变量,并利用多目标粒子群算法进行优化,提高零部件结构敏感部位的安全度.算例结果表明所提方法可以有效地改善结构易损部位的应力分布情况,提高零件结构细节抗缺陷的性能.
Abstract:

In order to enhance the availability of the vulnerable area, a new method for optimizing mechanical structure to prevent defect was proposed. An abstract defect model was introduced to present the simple invasion and migration process of defect in the structure. Sobol sensitivity technique was used to study the damage degree of parameters in the defect model based on structural analysis. Then the vulnerable areas were labeled by comparing the damage degree. The sensitive areas were taken the object of anti-defect detail structure optimization. The optimization variables were selected tendentiously based on the parameters with bigger damage degree. Multi-objective particle swarm algorithm was employed to find the optimal distribution of the variables in order to improve the safety of the sensitive areas of structure. Results show that the proposed method improves the defect resistance performance of the vulnerable area.
出版日期: 2015-08-01
:  TH 452  
基金资助:

国家自然科学基金资助项目(51405435)；国家“973”重点基础研究发展规划项目计划（2011CB706506）.
通讯作者: 赵昕玥,女,讲师.     E-mail: zhaoxinyue@zju.edu.cn
作者简介: 尹娇妹（1990—）,女,硕士生,从事空分设备研究. E-mail: yinjiaomeiabc@163.com
服务　　
把本文推荐给朋友
加入引用管理器
E-mail Alert
RSS
作者相关文章　　

引用本文:

尹娇妹, 赵昕玥, 张树有. 考虑Sobol缺陷敏感度的抗恶劣环境结构设计方法[J]. 浙江大学学报(工学版), 10.3785/j.issn.1008-973X.2015.08.012.

YIN Jiao-mei, ZHAO Xin-yue, ZHANG Shu-you. Method for designing parts structure to resist harsh environments considering sobol defects sensitivity. JOURNAL OF ZHEJIANG UNIVERSITY (ENGINEERING SCIENCE), 10.3785/j.issn.1008-973X.2015.08.012.

链接本文:

http://www.zjujournals.com/eng/CN/10.3785/j.issn.1008-973X.2015.08.012    或    http://www.zjujournals.com/eng/CN/Y2015/V49/I8/1487

［1］ 雒婧,席光,郭常青.离心叶轮的应力数值分析与结构优化［J］.流体机械,2004,32(11): 8-10.
LUO Jing, XI Guang, GUO Chang-qing. Numerical analysis of stress and structure optimization for centrifugal impeller ［J］. Fluid Machinery, 2004, 32(11): 8-10.
［2］ 陈山,杨策,杨长茂,等.几何参数对离心叶轮强度和气动性能影响的研究［J］. 流体机械,2012,40(3): 21-26.
CHEN Shan, YANG Ce, YANG Chang-mao, et al. Investigation of geometrical parameters influence to the stress and aerodynamic performance of centrifugal impeller ［J］. Fluid Machinery, 2012, 40(3): 21-26.
［3］ ZEMP A, ABHARI R S. Vaned diffuser induced impeller blade vibrations in a high-speed centrifugal compressor ［J］. Journal of Turbomachinery, 2012, 135(2): 19.
［4］ GOMES H M. Truss optimization with dynamic constraints using a particle swarm algorithm ［J］. Expert Systems with Applications, 2011, 38(1): 957-968.
［5］ 冯消冰,黄海,王伟.基于遗传算法的大型风机复合材料叶片根部强度优化设计［J］.复合材料学报,2012,29(5): 196-202.
FENG Xiao-bing, HUANG Hai, WANG Wei. Strength optimization of large wind turbine blade root on the genetic algorithm ［J］. Acta Materiae Compositae Sinica, 2012, 29(5): 196-202.
［6］ LEE S, LEE D H, KIM K H, et al. Multi-disciplinary design optimization and performance evaluation of a single stage transonic axial compressor ［J］. Journal of Mechanical Science and Technology, 2013, 27(11): 3309-3318.
［7］ MILAD A, ALI G N, SEKHAR R, et al. A new approach for optimizing automotive crashworthiness concurrentusage of ANFIS and Taguchi method  ［J］. Structural and Multidisciplinary Optimization, 2014, 49(3): 485-499.
［8］ SU R Y, GUI L J, FAN Z J. Multi-objective optimization for bus body with strength and rollover safety constraints based on surrogate models ［J］. Structural and Multidisciplinary Optimization, 2011, 44(3): 431-441.
［9］ 杨长辉,秦飞龙,黄德见,等.基于拓扑优化方法主减速器壳体的轻量化设计［J］.机械传动,2014,38(7): 67-70.
YANG Chang-hui, QIN Fei-long, HUANG De-jian, etal. The lightweight design for main reducer shell based on topological optimization method ［J］. Journal of Mechanical Transmission, 2014, 38(7): 67-70.
［10］ HONG J, LI B T, CHEN Y B, et al. Study on the optimal design of engine cylinder head by parametric structure characterization with weigh distribution criterion ［J］. Journal of Mechanical Science and Technology, 2011, 25(10): 2607-2614.
［11］ JANG G W, YOON M S, PARK J H. Lightweight flatbed trailer design by using topology and thickness optimization ［J］. Structural and Multidisciplinary Optimization, 2010, 41(2): 295-307.
［12］ 吴建国.裂纹扩展与损伤演化理论与应用研究［D］.北京：北京航空航天大学,2009.
WUJian-guo. Theoretical and applied research on crack growth and damage evolution［D］. Beijing: Beijing University of Aeronautics and Astronautics, 2009.
［13］ 聂祚兴,于德介,李蓉,等.基于Sobol’法的车身噪声传递函数全局灵敏度分析［J］. 中国机械工程,2012,23(14):1753-1757.
NIE Zuo-xing, YU De-jie, LI Rong, et al. Global sensitivity analysis of autobodies’ noise transfer functions based on sobol’ method ［J］.China Mechanical Engineering,2012, 23(14): 1753-1757.
［14］ 信昆仑,詹书俊,陶涛,等.基于灵敏度分析的供水网模型多目标校核［J］.同济大学学报,2014,42(5):736-739.
XIN Kun-lun,ZHAN Shu-jun,TAO tao,et al. Multiobjective calibration of hydraulic model in water distribution network based on sensitivity analysis ［J］.Journal of Tongji University,2014, 42(5): 736-739.
［15］ VLADIMIR C,MA Y Q. Practical Selection of SVM Parameters and Noise Estimation for SVM Regression ［J］. Neural Networks, 2004, 17(1): 113-126.
［16］ CLARKE S M, GRIEBSCH J H, SIMPSON T W. Analysis of support vector regression for approximation of complex engineering analyses ［J］.Journal of Mechanical Design, 2005, 127(6): 1077-1087.
［17］ 徐鹤鸣. 多目标粒子群优化算法的研究［D］.上海：上海交通大学,2013.
XU He-ming. Research on multiobjective particle swarm optimization algorithms［D］. Shanghai: Shanghai Jiao Tong University, 2013.
［18］ ZAHAR E,Kao Y T. Hybrid Nelder-Mead simplex search and particle swarm optimization for constrained engineering design problems ［J］. Expert Systems with Applications, 2009, 36(2): 3880-3886.
［19］ 汪泉. 风力机叶片气动外形与结构的参数化耦合设计理论研究［D］.重庆：重庆大学,2013.
WANG Quan. Study on the parameterized coupled design theory of wind turbine blade aerodynamic shape and structure［D］. Chongqing: Chongqing University, 2013.
［20］ 孙涛,王毅,王晓放,等.变厚度叶片对离心压缩机结构强度和性能影响［J］.大连理工大学学报,2012, 52(1):29-34.
SUN Tao, WANG Yi, WANG Xiao-fang, et al. The effect of variable thickness blade on structural strength and performance of centrifugal compressor ［J］. Dalian University of Technology, 2012, 52(1): 29-34.
［21］ 王述学.半封闭式水泵叶轮：中国,201320716650.7［P］. 20140625.
WANG Shu-xue. Semi-closed water pump impeller: China, 201320716650.7［P］. 20140625.
No related articles found!