[1] MATHAR J.Determination of initial stresses by measuring the deformations around drilled holes [J].Transactions of ASME,1934,56(4):249-254.
[2] NIKULARI A,LU J,FLAVENOT J F.Measurement of residualstress distribution by the incremental holedrilling method [J].Journal of Mechanical Working Technology,1985,11(2):167-188.
[3] 欧阳宇平,王世中.钻孔法测量残余应力附加应变的研究(Ⅱ)[J].实验力学,1991,6(1):34-41.
OUYANG Yuping,WANG Shizhong.Strains induced by hole drilling method for residua1 stresses measurement [J].Journal of Experimental Mechanics,1991,6(1):34-41.
[4] 杨伯源.钻孔偏心下的应变释放系数及残余应力[J].实验力学,1990,5(3):329-335.
YANG Boyuan.Relievedstrain coefficients and residualstresses resulted from blindhole method with offcenter hole [J].Journal of Experimental Mechanics,1990,5(3):329-335.
[5] 刘一华,贺赟辉,詹春晓,等.盲孔法中释放系数的数值计算方法[J] .机械强度,2008,30(1):33-36.
LIU Yihua,HE Yunhui,ZHAN Chunxiao,et al.Numerical Method for calculation of release coefficients in blind hole method [J].Journal of Mechanical Stress,2008,30(1):33-36.
[6] 印兵胜.盲孔法测量残余应力技术[R].郑州:郑州机械研究所,2004.
[7] 张晓宏,赵海燕,蔡志鹏,等.小孔法测量残余应力时孔边塑性应变的有限元分析及修正[J].机械工程学报,2005,41(3):193-200.
ZHANG Xiaohong,ZHAO Haiyan,CAI Zhipeng,et al.FEM analysis and correction on plasticity effect at the hole edge when using the centre hole method for measuring residual stress \ [J\].Chinese Journal of Mechanical Engeneering,2005,41(3):193-200.
[8] MOHARAMI R,SATTARIFAR I.Experimental and numerical study of measuring high welding residual stresses by using the blindholedrilling technique [J].The Journal of Strain Analysis for Engineering Design.2008,43(3):141-148.
[9] 李广铎,刘柏梁,李本远.孔边塑性变形对测定焊接残余应力精度的影响[J].焊接学报,1986,7(2):87-93.
LI Guangduo,LIU Boliang,LI BenYuan.Influence of holeside plastic deformation on the accuracy of residual welding stress measurement [J].Transactions of The China Welding Institution,1986,7(2):87-93.
[10] 陈惠南.盲孔法测量残余应力A、B系数计算公式讨论[J].机械强度,1989,11(2):31-36.
CHEN Huinan.A discussion of calculation of coefficients of A and B by blindholedrilling method [J].Journal of Mechanical Strength,1989,11(2):31-36.
[11] 谭明鹤,王荣辉,黄永辉.盲孔法测残余应力中应变释放系数的修正方法[J].热加工工艺,2007,36(19):65-68.
TAN Minghe,WANG Ronghui,HUANG Yonghui.Correctional method of strain release coefficients by blindhole technique to measure residual stress [J].Hot Working Techonlogy,2007,36(19):65-68.
[12] 徐芝伦.弹性力学[M].3版.北京:高等教育出版社,1990:5.
[13] 刘鸿文.材料力学[M].4版.北京:高等教育出版社,2000:237、246. |