Please wait a minute...
浙江大学学报(工学版)
浙江大学学报(工学版)  2018, Vol. 52 Issue (4): 781-787    DOI: 10.3785/j.issn.1008-973X.2018.04.023
航空航天技术     
光纤陀螺纯滞后测试系统的设计与实现
陈贤, 杨建华, 周一览, 舒晓武
浙江大学 光电科学与工程学院, 浙江 杭州 310027
Design and realization for FOG pure lag test system
CHEN Xian, YANG Jian-hua, ZHOU Yi-lan, SHU Xiao-wu
College of Optical Science and Engineering, Zhejiang University, Hangzhou 310027, China
 全文: PDF(1700 KB)   HTML
摘要：

针对纯滞后时间这一衡量光纤陀螺（FOG）动态性能的关键评测指标，设计光纤陀螺纯滞后时间测试系统.该测试系统通过撞击结构产生角速度冲击，利用数据分析得到纯滞后时间的测试结果.相比于其他的纯滞后时间测试系统，该系统可以在不改变陀螺原有工作状态的前提下实现纯滞后时间的测试.在阐明纯滞后系统测试的方案和原理之后，采用研制出的测试系统对典型陀螺产品的极限纯滞后时间进行测试.测试系统能够实现的测试精度和测试次数相关，当测试次数达到31次时，可以有99%以上的概率实现±25 μs的测量精度.
Abstract:

A test system was demonstrated to realize the measurement of pure lag time, which is an important factor for characterizing the dynamic performance of fiber optical gyroscope (FOG). In this test system, velocity shock was generated by a designed impact structure, and the measurement results were gotten through data analysis. The system can achieve pure lag test without changing the working status of FOG compared with previous test systems. The designing scheme and operating principle were analyzed in detail. Then the pure lag of a typical fiber-optic gyroscope product was experimentally tested. The measurement accuracy of the system depends on test times. The probability of realizing an accuracy of ±25 μs can be more than 99% with 31 times of tests.
收稿日期: 2016-12-19
CLC:  V241  
通讯作者: 杨建华,男,工程师.orcid.org/0000-0002-3619-4850.     E-mail: xxianhua@zju.edu.cn
作者简介: 陈贤(1990-),男,博士,从事微弱信号检测技术的研究.orcid.org/0000-0003-0194-3994.E-mail:xian@zju.edu.cn
服务　　
把本文推荐给朋友
加入引用管理器
E-mail Alert
作者相关文章　　

引用本文:

陈贤, 杨建华, 周一览, 舒晓武. 光纤陀螺纯滞后测试系统的设计与实现[J]. 浙江大学学报(工学版), 2018, 52(4): 781-787.

CHEN Xian, YANG Jian-hua, ZHOU Yi-lan, SHU Xiao-wu. Design and realization for FOG pure lag test system. JOURNAL OF ZHEJIANG UNIVERSITY (ENGINEERING SCIENCE), 2018, 52(4): 781-787.

链接本文:

http://www.zjujournals.com/eng/CN/10.3785/j.issn.1008-973X.2018.04.023    或    http://www.zjujournals.com/eng/CN/Y2018/V52/I4/781

[1] 张桂才. 光纤陀螺原理与技术[M]. 1版. 北京:国防工业出版社, 2008:2-3.
[2] SANDERS G A, SANDERS S J, STRANDJORD L K. Fiber optic gyro development at Honeywell[C]//SPIE Commercial + Scientific Sensing and Imaging. Baltimore:SPIE, 2016:985207.
[3] MINAKUCHI S, SANADA T, TAKEDA N. Thermal strain in lightweight composite fiber-optic gyroscope for space application[J].Lightwave Technology, 2015, 33(12):2658-2662.
[4] WANG Y, MA L, YU H. Modeling and simulation on temperature performance in fiber optic gyroscope fiber coil of shipborne strapdown inertial navigation system[J]. Proceedings of the SPIE, 2016, 10158:101580S.
[5] 赵政鑫, 于海成, 李超, 等. 基于等效角振动的光纤陀螺带宽测试方法[J]. 导航与控制, 2016, 15(1):98-102. ZHAO Zheng-xin, YU Hai-cheng, LI Chao, et al. A bandwidth test method for fiber optic gyroscope based on equivalent angular vibration[J]. Navigation and Control, 2016, 15(1):98-102.
[6] 薛宁,刘瑞, 张超, 等. 一种光纤陀螺输出延迟时间的测量装置及其方法:201110090599.9[P]. 2011-04-12.
[7] 陈贤,周一览,杨建华,等. 一种准确评测光纤陀螺输出延迟时间的装置和方法:CN201510612439.4[P]. 2014-05-11.
[8] 周一览. 过调制技术在光纤陀螺寻北中的应用[J]. 浙江大学学报:工学版, 2015, 49(8):1817-1820. ZHOU Yi-lan. Application of over modulation technique in fiber optic gyroscope north-seeking[J].Journal of Zhejiang University:Engineering Science, 2015, 49(8):1817-1820.
[9] YOON Y G, LEE S M, KIM J H. Implementation of a low-cost fiber optic gyroscope for a line-of-sight stabilization system[J].Journal of Institute of Control, 2015, 21(1):168-172.
[10] 刘思科, 陈明, 赵丽华. 一种光纤陀螺测试数据采集系统设计[J]. 计算机测量与控制, 2007, 15(6):972-974. LIU Si-ke, CHEN Ming, ZHAO Li-hua. Design of fiber optical gyroscope test data collecting system[J]. Computer Measurement and Control, 2007, 15(6):972-974.
[11] 张林, 刘建斌, 郭竞尧, 等. 高速运动零件的碰撞特性实验研究[J]. 火炮发射与控制学报, 2017, 38(1):79-83. ZHANG Lin, LIU Jian-bin, GUO Jing-yao, et al. Experimental study on the imepact property of high speed moving parts[J].Journal of Gun Launch and Control, 2017, 38(1):79-83.
[12] 邹丽新, 孙海燕, 季晶晶, 等. 基于弹性体碰撞时间测定的杨氏模量测量[J]. 自动化仪表, 2009, 30(2):50-53. ZOU Li-xin, SUN Hai-yan, JI Jing-jing, et al. Measuring young's modulus based on measurement of collision time ofelastomer[J]. Process Automation Instrumentation, 2009, 30(2):50-53.
[13] 王映宇, 周一览, 杨建华, 等. 一种用于光纤陀螺输出延迟时间自动测量的程控撞击装置:CN201320612757.7[P]. 2013-09-29.
[14] 白亮, 严义, 周宏伟. 双核微处理器实时系统的软件架构方法[J]. 单片机与嵌入式系统应用, 2014, 14(8):13-16. BAI Liang, YAN Yi, ZHOU Hong-wei. Software architecture method of real-time system with dual-core processor[J].Microcontrollers and Embedded Systems, 2014, 14(8):13-16.
[15] HOLZKE W, ADLER J, PAASCH W, et al. Operation and control of a three-level medium-voltage NPC inverter with TI F28M35 microcontroller[C]//PCIM Europe. Nuremberg:[s. n.], 2015:1-8.
[16] 龚丹, 祝宇楠, 田正其, 等. 基于F28M35X的数字化电能表的设计[J]. 计算机测量与控制, 2017, 25(2):228-230. GONG Dan, ZHU Yu-nan, TIAN Zheng-qi, et al. Design of digital input electricity meter based on F28M35X[J].Computer Measurement and Control, 2017, 25(2):228-230.
No related articles found!