[1] 王海峰.冲击作用力学行为研究[J].现代制造技术与装备,2014(4): 43-44.
WANG Haifeng. Studies on the contact mechanical behavior [J]. Modern Manufacturing Technology andEquipment, 2014(4): 43-44.
[2] 王晨,马卫华,罗世辉,等.机车牵引销冲击动力学特性分析[J].振动与冲击,2016, 35(3): 34-40.
WANG Chen, MA Weihua, LUO Shihui, et al. Analysis on dynamic features of locomotive traction pin [J]. Journal of Vibration and Shock, 2016, 35(3): 34-40.
[3] 丁问司,丁元文,范亚军.交变气动冲击锤瞬态冲击特性分析[J].机械工程学报,2015, 51(3): 73-79.
DING Wensi, DING Yuanwen, FAN Yajun. Analysis of the transient impact performance of alternating pneumatic impact hammer[J]. Journal of Mechanical Engineering, 2015, 51(3): 73-79.
[4] KHEDMATI M R, GHAVAMI K, EDALAT P. Static and dynamic structural analysis of aluminum craft deck structures, subjected to repeated impact load [J]. Latin American Journal of Solids and Structures, 2009, 6(3): 265-283.
[5] 程志胜,魏天路,高德.瓦楞纸板缓冲动态模型的建立及参数识别[J].农业机械学报,2000, 31(2): 100-103.
CHENG Zhisheng, WEI Tianlu, GAO De. A model for dynamic compressive performance of corrugated board and its application [J]. Transactions of the Chinese Society of Agricultural Machinery, 2000, 31(2): 100-103.
[6] 刘中华,尹晓春.自由梁对简支梁的多次弹塑性撞击[J].机械工程学报,2010,46(10): 47-53.
LIU Zhonghua, YIN Xiaochun. Multiple elasticplastic impacts between freefree beam and simply supported beam [J]. Journal of Mechanical Engineering, 2010,46(10): 47-53.
[7] 高震,顾永宁,胡志强.结构冲击试验的校准计算[J].船舶力学,2005,9(2): 77-82.
GAO Zhen, GU Yongning, HU Zhiqiang. Benchmark study of structural impact test [J]. Journal of Ship Mechanics, 2005,9(2): 77-82.
[8] ABDELKRIM M, BONNET G, BUHAN P D. A computational procedure for predicting the long term residual settlement of a platform induced by repeated traffic loading [J]. Computers and Geotechnics, 2003, 30(6): 463-476.
[9] 边学成,蒋红光,申文明,等.基于模型试验的高铁路基动力累积变形研究[J].土木工程学报,2011, 44(6): 112-119.
BIAN Xuecheng, JIANG Hongguang, SHEN Wenming, et al. Study of accumulative deformation of highspeed railways based on physical model testing [J]. China Civil Engineering Journal, 2011, 44(6): 112-119.
[10] 刘显贵,刘诗彬,李颖新,等,基于ISO6055的叉车护顶架动载安全性能的仿真及试验研究[J].机械强度,2014,36(5): 757-761.
LIU Xiangui, LIU Shibin, LI Yingxin, et al. Simulation and experimental research of forklift overhead guard dynamic safety based on ISO 6055 [J]. Journal of Mechanical Strength, 2014, 36(5): 757-761.
[11] 余跃,周鸿波,童水光,等.大客车侧翻耐撞性的结构设计方法[J].浙江大学学报:工学版,2011, 45(4):714-718.
YU Yue, ZHOU Hongbo, TONG Shuiguang,et al. Structural design method for rollovers crashworthiness of large bus [J]. Journal of Zhejiang University: Engineering Science, 2011, 45(4): 714-718.
[12] 庄茁,由小川,廖剑晖.基于ABAQUS的有限元分析和应用[M].北京:清华大学出版社,2009: 204-206.
[13] TODOROV G,KAMBEROV K,ROMANOV B, et al. Safety and reliability assesment of forklift truck cabine based on virtual prototype [C]∥Proceedings of the International Conference on Manufacturing Systems. Bucharest: Romania Academy Press,2009: 18423183.
[14] ISO6055. Industrial trucks: overhead guardsspecification and testing [S]. Switzerland: ISO,2004.
[15] 张策.机械动力学[M].2版.北京:高等教育出版社,2008: 117123.(上接第81页)
[9] SHUKLA, SINGLA E, WAHI P, et al. A direct variational method for planning monotonically optimal paths for redundant manipulators in constrained workspaces [J]. Robotics and Autonomous Systems, 2013, 61(2): 209-220.
[10] YAHYA S, MOGHAVVEMI M, MOHAMMED A. Geometrical approach of planar hyperredundant manipulators: inverse kinematics, path planning and workspace [J]. Simulation Modelling Practice and Theory, 2011, 19(1): 406-422.
[11] 姜柏森,杨永胜,胡士强.八面体变几何桁架机器人的运动学分析及仿真研究[J].制造业自动化,2015,37(3): 20-22.
JIANG Baisen, YANG Yongsheng, HU Shiqiang. The solution and simulation for the kinematic problem of octahedral VGT manipulator [J]. ManufacturingAutomation, 2015, 37(3): 20-22.
[12] YANG Y, JIANG B, HU S. Fast trajectory planning for VGT manipulator via convex optimization [J]. International Journal of Advanced Robotic Systems, 2015, 12(9): 1-17.
[13] 杭鲁滨,王彦,邓辉宇,等.基于Groebner基的八面体变几何桁架机构位置正解分析[J].机械科学与技术,2004, 23(6): 745-747.
HANG Lubin, WANG Yan, DENG Huiyu, et al. Forward displacement analysis of the octahedron variable geometry truss based on Groebner basis[J].Mechanical Science and Technology, 2004, 23(6):745-747. |