Please wait a minute...
浙江大学学报(工学版)
机械工程     
岛中含湖型截面的环切刀轨连接方法
何雪军,王进,陆国栋,陈立
1. 浙江大学 流体动力与机电系统国家重点实验室,浙江 杭州 310027;
2. 杭州新松机器人自动化有限公司,浙江 杭州 311200
Contour-parallel tool path linking method for sections with lake-including islands
HE Xue jun, WANG Jin, LU Guo dong, CHEN Li
1. State Key Laboratory of Fluid Power and Mechatronic Systems, Zhejiang University, Hangzhou 310027, China;
2. Hangzhou SIASUN Robot and Automation Company Limited, Hangzhou 311200, China
 全文: PDF(3260 KB)   HTML
摘要:

为便于连接岛中含湖型截面上的环切刀轨,根据偏置环的旋向以及是否从外轮廓偏置而来,将其划分为CCW(逆时针) I型、CCW II型、CW(顺时针)型3种.从减少开槽切削,降低刀具负荷的原则出发,确定CCW I型与CCW II型从内环往外加工、CW型从外环往内加工的方法.通过包含关系分析与环间距离分析,确定3类环的具体构成以及环与环之间的父子关系.在此基础上,通过支链搜索获得多条局部支链,根据避免过切削的原则确定支链中各偏置环上的相应连接点.最后,通过支链与支链之间的环序号比较,判断是否合并,从而输出加工路径.对于粗加工,增加残区补加工刀轨.该方法避免了树型结构与指针的使用,不涉及复杂的深度优先遍历,算法简单,思路清晰,便于实施.木雕实验证实了该方法的可行性.

Abstract:

All offset loops were divided into three types: CCW(counterclockwise) I, CCW II and CW(clockwise) according to the directions of offset loops and whether they were offset from the outer contour, in order to facilitate linking of contourparallel tool path obtained from sections with lake-including islands. From principles like reducing slot cutting and lowering tool load, the offset loops of CCW I and CCW II types were cut from inner to outer while CW type was cut in the opposite way. By the analysis of inclusion relations and distance, the detailed construction and father/child relationship of three type loops were determined. On this basis, many local partial links were obtained upon searching, and the points for linking were calculated to avoid overcutting. Finally, sequential numbers were compared to determine whether partial loops would merge or not, so as to output processing data. For roughing tool path, extra tool path was added for uncut regions. This method avoids usage of tree data structure and pointers, not involving complex depth-first traversal,which is simple, clear and easy to implement. Wood carving experiments confirm its feasibility.

出版日期: 2016-09-22
:  TH 164  
基金资助:

国家自然科学基金资助项目(51275460); 中国博士后科学基金资助项目(2015M581926); 杭州市重大科技创新资助项目(20132111A04).

通讯作者: 王进,男,副教授. ORCID: 0000-0003-3106-021X.     E-mail: dwjcom@zju.edu.cn
作者简介: 何雪军(1984-),男,博士后,从事机器人技术研究. ORCID: 0000-0002-6846-1490. E-mail: hexuejun@zju.edu.cn
服务  
把本文推荐给朋友
加入引用管理器
E-mail Alert
RSS
作者相关文章  

引用本文:

何雪军,王进,陆国栋,陈立. 岛中含湖型截面的环切刀轨连接方法[J]. 浙江大学学报(工学版), 10.3785/j.issn.1008-973X.2016.09.03.

HE Xue jun, WANG Jin, LU Guo dong, CHEN Li. Contour-parallel tool path linking method for sections with lake-including islands. JOURNAL OF ZHEJIANG UNIVERSITY (ENGINEERING SCIENCE), 10.3785/j.issn.1008-973X.2016.09.03.

链接本文:

http://www.zjujournals.com/eng/CN/10.3785/j.issn.1008-973X.2016.09.03        http://www.zjujournals.com/eng/CN/Y2016/V50/I9/1654

[1] PARK S C, CHOI B K. Toolpath planning for directionparallel area milling [J]. ComputerAided Design, 2000, 32(1): 17-25.
[2] KIM H C, YANG M Y. Incomplete meshbased tool path generation for optimum zigzag milling [J]. The International Journal of Advanced Manufacturing Technology, 2008, 35(7/8): 803-813.
[3] PARK S C, CHUNG Y C. Offset toolpath linking for pocket machining [J]. ComputerAided Design, 2002, 34(4): 299-308.
[4] PARK S C, CHUNG Y C, CHOI B K. Contourparallel offset machining without toolretractions [J]. ComputerAided Design, 2003, 35(9): 841-849.
[5] DAI N, DONG G L, LIAO W H, et al. Dental restoration contourparallel offset tool path links based on graph model [J]. The International Journal of Advanced Manufacturing Technology, 2013, 66(14): 555-563.
[6] 董光雷,戴宁,杨峰,等. 环切刀轨无跳刀过渡连接算法[J]. 中国机械工程,2012,32(16):1896-1902.
DONG Guanglei, DAI Ning, YANG Feng, et al. Contourparallel offset toolpath linking without tool retraction [J]. China Mechanical Engineering, 2012, 32(16):  1896-1902.
[7] HAO Y T, JIANG L L. Optimal algorithm for no toolretractions contourparallel offset toolpath linking [J]. Chinese Journal of Mechanical Engineering, 2007, 20(2): 21-25.
[8] 张鸣,刘伟军,卞宏友. 基于自由区域的环切轨迹优化连接方法[J]. 中国机械工程,2011,22(4):468-473.
ZHANG Ming, LIU Weijun, BIAN Hongyou. Optimized contourparallel offset toolpath linking method based on free region [J]. China Mechanical Engineering, 2011, 22(4): 468-473.
[9] 王玉国. 数控雕刻加工关键技术研究[D]. 南京:南京航空航天大学,2007.
WANG Yuguo. Research on key technologies of numerical control engraving machining \[D\]. Nanjing: Nanjing University of Aeronautics and Astronautics, 2007.
[10] 杨峰,廖文和,戴宁,等. 刀轨环无跳刀尖角垂线过渡连接算法[J]. 中国机械工程,2013,24(19): 2592-2596.
YANG Feng, LIAO Wenhe, DAI Ning, et al. Connection algorithm about closed angle vertical transition of tool path track without toolretraction [J]. China Mechanical Engineering, 2013, 24(19): 2592-2596.
[11] LIN Z W, FU J Z, SHEN H Y, et al. Smooth contourparallel tool path generation for highspeed machining through a dual offset procedure [J]. The International Journal of Advanced Manufacturing Technology, 2015,81(5): 1233-1245.
[12] HORMANN K, AGOTHOS A. The point in polygon problem for arbitrary polygons [J]. Computational Geometry, 2001, 20(3): 131-144.
[13] 孙全平,廖文和. 自识别加工残区的高速铣削刀轨生成算法研究[J]. 南京航空航天大学学报,2004,36(1):72-76.
SUN Quanping, LIAO Wenhe. Toolpath generation algorithm on automatic recognition uncut free pocketing for highspeed milling [J]. Journal of Nanjing University of Aeronautics and Astronautics, 2004, 36(1): 72-76.
[14] 安鲁陵,周来水,庄海军,等. 型腔高速铣削刀轨生成算法研究[J]. 计算机辅助设计与图形学学报,2004,16(9): 1202-1206.
AN Luling, ZHOU Laishui, ZHUANG Haijun, et al. Tool path generation for highspeed milling of pockets [J]. Journal of ComputerAided Design and Computer Graphics, 2004, 16(9): 1202-1206.
[15] 雷伟军,程筱胜,戴宁,等. 复杂型腔环切拐角过渡刀轨生成技术[J]. 计算机集成制造系统,2014,20(9):2178-2185.
LEI Weijun, CHENG Xiaosheng, DAI Ning, et al. Toolpath transition technology of CPO corner for complex pocket [J]. Computer Integrated Manufacturing Systems, 2014, 20(9): 2178-2185.
[16] LIN Z W, FU J Z, SHEN H Y, et al. Global uncut regions removal for efficient contourparallel milling [J]. The International Journal of Advanced Manufacturing Technology, 2013,68(5): 1241-1252.
[17] ZHANG Z Y, JOSHI S. An improved slicing algorithm with efficient contour construction using STL files [J]. The International Journal of Advanced Manufacturing Technology, 2015,80(5): 1347-1362.
[18] CHEN X, MCMAINS S D. Polygon offsetting by computing winding numbers [C] ∥ International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. California: ASME, 2005: 565-575.

[1] 何雪军, 王进, 陆国栋, 刘振宇, 陈立, 金晶. 基于三角网切片及碰撞检测的工业机器人三维头像雕刻[J]. 浙江大学学报(工学版), 2017, 51(6): 1104-1110.
[2] 王自立, 张树有, 裘乐淼. 基于可信度区间的注塑装备设计塑化能耗分析[J]. 浙江大学学报(工学版), 2017, 51(2): 328-335.