Please wait a minute...
浙江大学学报(工学版)
浙江大学学报(工学版)
土木工程、水利工程、交通工程     
螺旋土钉钻进成孔扭矩分析
李智宁, 韩同春, 豆红强, 邱子义
浙江大学 滨海和城市岩土工程研究中心,浙江 杭州 310058
Analysis of torque on helical soil nail drilling into strata
LI Zhi-ning, HAN Tong-chun, DOU Hong-qiang, QIU Zi-yi
Research Center of Coastal and Urban Geotechnical Engineering, Zhejiang University, Hangzhou 310058, China
 全文: PDF(1304 KB)   HTML
摘要：

为研究木塑复合材料螺旋土钉钻进成孔过程中受力的特点,对螺旋土钉进行现场螺旋钻入试验,分析试验现象并推导成孔扭矩的理论计算公式.综合运用试验和解析方法,分析土钉有效入土长度、螺纹宽度、土钉直径、螺距和土质在同等条件下分别对螺旋土钉钻进成孔过程的影响.结果表明：有效入土长度和螺纹宽度越小则扭矩越小；杆体直径越小,螺纹直径越大,螺旋土钉钻入扭矩越小；螺距略大于螺纹直径时所需成孔扭矩最小；土质越硬,螺旋土钉钻入扭矩越大,成孔越困难,因此木塑复合材料螺旋土钉适用于软土.
Abstract:

The field experiments were done to study the forces on wood-plastic-composites (WPC) helical soil nail drilling into soil strata. A formula of the drilling torque was derived according to the experimental data. The experimental and analytical results showed that the drilling process of helical soil nail was affected by many factors, such as effective length of soil nail in the strata, width of screw thread, diameter of soil nail, pitch of screw thread and soil properties. Results show that the shorter the effective length of soil nail in the strata and the smaller the width of screw thread, the lower the needed torque. The smaller the rod body diameter and the bigger the screw thread diameter, the lower the needed torque. The minimum torque occurs when pitch of screw thread is slightly larger than the diameter of screw thread. It is difficult for WPC helical soil nail to drill in hard soil so that it is suitable for soft soil.
出版日期: 2015-08-01
:  TU 753.8  
基金资助:

国家自然科学基金资助项目（51178423）；浙江省自然科学基金资助项目（LY15E080010）.
通讯作者: 韩同春，男，副教授.     E-mail: htc@zju.edu.cn
作者简介: 李智宁（1983—），男，工程师，硕士，主要从事边坡稳定方面的研究. E-mail:win8112001@163.com
服务　　
把本文推荐给朋友
加入引用管理器
E-mail Alert
RSS
作者相关文章　　

引用本文:

李智宁, 韩同春, 豆红强, 邱子义. 螺旋土钉钻进成孔扭矩分析[J]. 浙江大学学报(工学版), 10.3785/j.issn.1008-973X.2015.08.004.

LI Zhi-ning, HAN Tong-chun, DOU Hong-qiang, QIU Zi-yi. Analysis of torque on helical soil nail drilling into strata. JOURNAL OF ZHEJIANG UNIVERSITY (ENGINEERING SCIENCE), 10.3785/j.issn.1008-973X.2015.08.004.

链接本文:

http://www.zjujournals.com/eng/CN/10.3785/j.issn.1008-973X.2015.08.004    或    http://www.zjujournals.com/eng/CN/Y2015/V49/I8/1426

［1］ 程良奎,李象范.岩土锚固·土钉·喷射混凝土—原理、设计与应用［M］.北京: 中国建筑工业出版社, 2008： 533-542.
［2］ 李家华,窦德功,鲁子爱.螺纹桩负摩阻力计算方法［J］. 科学技术与工程, 2012, 12(25): 6369-6372.
LI Jia-hua, DOU De-gong, LU Zi-ai. Calculation and research on negative skin friction resistance of screw pile［J］.Science Technology and Engineering, 2012, 12(25): 6369-6372.
［3］ 窦德功,鲁子爱.螺纹桩承载性状分析与研究［J］.水运工程, 2012, 4: 32-35.
DOU De-gong, LU Zi-ai. Bearing behavior of screw pile ［J］. Port＆Waterway Engineering, 2012, 4: 32-35.
［4］ 孙文怀,张元冬,魏厚峰，等.螺纹桩在软弱地层中的应用［J］.华北水利水电学院学报, 2009, 30(3): 74-76.
SUN Wen-huai,ZHANG Yuan-dong, WEI Hou-feng, et al. Application of screw pile in weak strata  ［J］. Journal of North China Institute of Water Conservancy and Hydroelectric Power, 2009, 30(3): 74-76.
［5］ NIROUMAND H, KASSIM K A, NAZIR R, et al. Systematic review of screw anchors in cohesionless soils ［J］. Soil mechanics and Foundation Engineering, 2013, 50(5): 212-217.
［6］ WANG D, MERIFIELD RS, GAUDIN C. Uplift behaviour of helical anchors in clay ［J］. Canadian Geotechnical Journal, 2013, 50(6): 575-584.
［7］ 金林轶.复合木塑材料与现代设计［J］.中国科技博览, 2013, 7: 260.
JIN Lin-yi. Wood plastic composite and modern design ［J］. Chinese Journal of science and Technology Expo, 2013, 7: 260.
［8］ 陈仲颐,周景星,王洪瑾.土力学［M］.北京: 清华大学出版社, 1994: 278-294.
［9］ 李志毅,刘钟,赵琰飞，等.螺旋挤土桩钻头优化分析［J］.同济大学学报：自然科学版, 2011, 39(8): 11451149: 278-294.
LI Zhi-yi, LIU Zhong, ZHAO Yan-fei, et al. Optimization analysis on drill Auger of soil displacement screw pile ［J］. Journal of Tongji University ：Natural Science, 2011, 39(8): 1145-1149.
No related articles found!