Please wait a minute...
浙江大学学报(工学版)
浙江大学学报(工学版)
能源工程与动力工程     
垃圾焚烧飞灰中主要元素的深度分布及形态
侯霞丽,李晓东,陈彤,陆胜勇,纪莎莎,任咏
浙江大学 能源清洁利用国家重点实验室,浙江 杭州 310027
Distribution and chemical forms of major elements in MSWI fly ash
HOU Xia-li, LI Xiao-dong, CHEN Tong, LU Sheng-yong, JI Sha-sha, REN Yong
State Key Laboratory of Clean Energy Utilization, Zhejiang University, Hangzhou 310027, China
 全文: PDF(2473 KB)   HTML
摘要：

以正在运行的3个不同垃圾焚烧炉的布袋除尘器飞灰为研究对象,分析不同炉型飞灰中的主要元素在飞灰颗粒不同深度上的分布状况及浸出特性,并着重对飞灰表面C和Cl的形态进行讨论.结果表明：飞灰的基体主要由Si、Al、Fe、Ca、Mg、Ti等高沸点的元素,通过机械迁移以氧化物的形式形成；而Na、K等低沸点元素,主要通过“蒸发-冷凝”机理以可溶性氯盐和硫酸盐的形式富集在飞灰颗粒表面.在飞灰表面,C元素主要以C=C、C-H/C-C、C-O/C=O/O-C=O等有机态形式出现,Cl元素的有机态和无机态,分别约占40%和60%.流化床飞灰表面Na、K等元素的富集状况没有炉排炉明显,主要是由于流化床炉气氛多呈氧化性并且其中氯含量较低,抑制了金属的挥发.
Abstract:

Three fly ash samples came from different types of municipal solid waste incineration (MSWI). The major elements in different depth of fly ashes and their leachabilities, especially chemical forms of C and Cl at the outermost layer of fly ash surface, were discussed. Results indicate that Si, Al, Fe, Ti and Ca, with high boiling point, are more easily taken into the core of fly ash particles mechanically in the forms of stable oxides. While elements with low boiling point, such as Na, K, Zn, are mostly adsorbed on the surface of fly ash particles by “evaporation-condensation” process. At the outermost layer of fly ash surface, the C has different species, such as graphitic-C(C=C), aliphatic-C(C-H/C-C) and O-functional groups(C-O/C=O/O-C=O); The Cl consists of both inorganic and organic functionalities, and the proportion of them is 60% and 40%, respectively. For the reasons of low concentration of chlorine and oxidizing atmosphere in circulating fluidized bed (CFB) incinerator, the enrichment of Na and K on the surface of fly ash particles in CFB incinerator is not as high as that in grate incinerator．
出版日期: 2015-12-26
:  X 705  
基金资助:

国家“973”重点基础研究发展规划资助项目（2011CB201500）；国家“863”高技术研究发展计划资助项目（2012AA062803）；环保公益基金资助项目（201209022）
通讯作者: 李晓东，男，教授     E-mail: lixd@zju.edu.cn
作者简介: 侯霞丽（1989-），女，硕士生，从事焚烧炉飞灰特性研究. E-mail: houxiali@zju.edu.cn
服务　　
把本文推荐给朋友
加入引用管理器
E-mail Alert
RSS
作者相关文章　　

引用本文:

侯霞丽,李晓东,陈彤,陆胜勇,纪莎莎,任咏. 垃圾焚烧飞灰中主要元素的深度分布及形态[J]. 浙江大学学报(工学版), 10.3785/j.issn.1008-973X.2015.05.017.

HOU Xia-li, LI Xiao-dong, CHEN Tong, LU Sheng-yong, JI Sha-sha, REN Yong. Distribution and chemical forms of major elements in MSWI fly ash. JOURNAL OF ZHEJIANG UNIVERSITY (ENGINEERING SCIENCE), 10.3785/j.issn.1008-973X.2015.05.017.

链接本文:

http://www.zjujournals.com/eng/CN/10.3785/j.issn.1008-973X.2015.05.017    或    http://www.zjujournals.com/eng/CN/Y2015/V49/I5/930

［1］ STANMORE B R. The formation of dioxins in combustion systems ［J］. Combustion and Flame, 2004, 136, 398-427．
［2］ MCKAY G. Dioxin characterisation, formation and minimisation during municipal solid waste (MSW) incineration: review ［J］. Chemical Engineering Journal, 2002, 86:343-368．
［3］ 张海英,赵由才,祁景玉. 生活垃圾焚烧飞灰的物理化学特性［J］. 环境科学与技术,2008,31（11）：96-99．
ZHANG Hai-ying, ZHAO You-cai, QI Jing-yu. Physicochemical property of MSWI fly ash ［J］. Environmental Science and Technology, 2008, 31(11):96-99．
［4］ 王军,蒋建国,隋继超,等. 垃圾焚烧飞灰基本性质的研究［J］. 环境科学,2006,27（11）：2283-2287．
WANG Jun, JIANG Jian-guo, SUI Ji-chao, et al. Fundamental properties of fly ash from municipal solid waste incineration ［J］. Environmental Science, 2006,27(11):2283-2287．
［5］ 李建新,严建华,金余其,等. 生活垃圾焚烧飞灰重金属特性分析［J］. 浙江大学学报：工学版，2004,38（4）：490-494．
LI Jian-xin, YAN Jian-hua, JIN Yu-qi, et al. Characteristic analysis of heavy metals in MSWI fly ash ［J］. Journal of Zhejiang University：Engineering Science, 2004,38(4):490-494．
［6］ MOULDER J F, STICHLE W F, SOBOL P E, et al. Handbook of X-ray photoelectron spectroscopy ［M］. Eden Praine: Perkin-Elmer,1992:38-65,168-188．
［7］ 王学涛,焦有宙,金保升. 华东地区垃圾焚烧飞灰基本特性研究［J］. 热力发电,2007（5）：38-42．
WANG Xue-tao, JIAO You-zhou, JIN Bao-sheng. Analysis of basic characteristics concerning fly ash from MSW incineration in east China ［J］. Thermal Power Generation, 2007(5):38-42．
［8］ 李润东,聂永丰,李爱民,等. 垃圾焚烧飞灰理化特性研究［J］. 燃料化学学报,2004,32（2）：175-179．
LI Run-dong, NIE Yong-feng, LI Ai-min, et al. Study on physical chemical characteristics of fly ash from municipal solid waste incinerator ［J］. Journal of Fuel Chemistry and Technology, 2004, 32(2):175-179．
［9］ 李浩,王恒,耿海洋,等. 垃圾焚烧飞灰物理化学性质的实验研究［J］. 环境工程学报,2007,1（12）：137-140．
LI Hao, WANG Heng, GENG Hai-yang, et al. A study on physical and chemical characteristics of fly ash from municipal solid waste incinerator ［J］. Chinese Journal of Environmental Engineering, 2007, 1(12):137-140．
［10］ TSUBOUCHI N, HAYASHI H, KAWASHIMA A, et al. Chemical forms of the fluorine and carbon in fly ashes recovered from electrostatic precipitators of pulverized coal-fired plants ［J］. Fuel, 2011, 90(1):376-383．
［11］ TSUBOUCHI N, HASHIMOTO H, OHTAKA N, et al. Chemical characterization of dust particles recovered from bag filters of electric arc furnaces for steelmaking: Some factors influencing the formation of hexachlorobenzene ［J］. Journal of Harazardous Materials, 2010, 183(1-3):116-124．
［12］ FUJIMORI E, SHIOZAWA R, IWATA S, et al. Multielement and morphological characterization of industrial waste incineration fly ash as studied by ICP-AES/ICP-MS and SEM-EDS ［J］. Bulletin of the Chemical Society of Japan, 2002, 75(6):1205-1213．
［13］ BELEVI H, MOENCH H. Factors determining the element behavior in municipal solid waste incinerators:1.Field Studies ［J］. Environmental Science and Technongy, 2000, 34:2501-2506．
［14］ CHEN J C, WEY M Y, LIU Z S. Adsorption mechanism of heavy metals on sorbents during incineration ［J］. Journal of Environmental Engineering, 2001, 127(1):63-69．
［15］ CAHILL C A, NEWLAND L W. Comparative efficiencies of trace metal extraction from municipal incinerator ashes ［J］. International Journal of Environmental Analytical Chemistry, 1982, 11:227-239．
［16］ DAVISON R L, NATUSCH D F S, WALLACE J R, et al. Trace elements in fly ash-dependence of concentration on particle size ［J］. Environmental Science and Technongy, 1974, 8(13): 1107-1113．
［17］ FERNANDEZ M A, MARTINE L, SEGARRA M, et al. Behavior of Heavy Metal In the Combustion Gases of Urban Waste Incinerators ［J］. Environmental Science and Technology, 1992, 26(5):1040-1047．
［18］ KLAIN D H, ANDREN A W, CENTER J A, et al. Pathways of 37 trace elements through coal-fired power plant ［J］. Environmental Science and Technology, 1975, 9(9):973979．
［19］ TAKAOKA M, TAKEDA N, MIURA S. The behaviour of heavy metals and phosphorus in an ash melting process ［J］. Waste Science and Technology, 1997, 36(11): 275282．
［20］ UCHIDA S, KAMO H, KUBOTA H. The source of HCl emission from municipal refuse incinerators ［J］. Industrial and Engineering Chemistry Research, 1988, 27(11):2188-2190．
［21］ WEI M Y, SU J L, YAN M H, et al. The concentration distribution of heavy metals under different incineration operation conditions ［J］. The Science of the Total Environment, 1998, 212:183-193．
［22］ J A 迪安,魏俊华. 兰氏化学手册［M］. 北京：科学出版社,2000:410-4129.
[1] 刘海龙, 周家伟, 陈云敏, 李育超, 詹良通. 城市生活垃圾填埋场稳定化评估[J]. 浙江大学学报(工学版), 2016, 50(12): 2336-2342.
[2] 毛华臻, 王飞, 毛飞燕, 池涌, 陆胜勇, 岑可法. 水热处理对污泥水分分布的影响[J]. 浙江大学学报(工学版), 2016, 50(12): 2283-2288.
[3] 张帅毅,黄亚继,王昕晔,严玉朋,刘长奇,陈波. 模拟垃圾焚烧过程中氯对铅动态挥发特性的影响[J]. 浙江大学学报(工学版), 2016, 50(3): 485-490.
[4] 陈彤, 詹明秀, 林晓青, 李晓东, 陆胜勇, 严建华. 特定污泥干化过程中二恶英抑制气体排放特性[J]. 浙江大学学报(工学版), 2015, 49(2): 322-329.
[5] 郭星明,何勇. 供应链实时库存与沙漏分播配货本体模型[J]. 浙江大学学报(工学版), 2015, 49(1): 54-62.
[6] 丁宽,仲兆平,张波,刘志超. 纯化凹凸棒土催化废轮胎热解制取高值液态产物[J]. 浙江大学学报(工学版), 2014, 48(11): 2053-2060.
[7] 张振营,严立俊. 城市新鲜生活垃圾变形与强度的关联特性[J]. 浙江大学学报(工学版), 2014, 48(11): 1962-1967.
[8] 邵志伟, 黄亚继, 张强, 刘培刚, 严玉朋. O2/CO2气氛下污泥与烟煤混合燃烧特性[J]. 浙江大学学报(工学版), 2014, 48(10): 1739-1745.
[9] 洪晨,邢奕,王志强,司艳晓,周亮. 不同pH下表面活性剂对污泥脱水性能的影响[J]. 浙江大学学报(工学版), 2014, 48(5): 850-857.
[10] 符成龙,麻红磊,池涌,严建华,倪明江. 热水解处理制革污泥过程中总Cr的转移与稳定性研究[J]. J4, 2013, 47(9): 1631-1636.
[11] 姬亚,陆胜勇,林晓青,李晓东,严建华. 危险废物焚烧炉烟气中二恶英气固相分配[J]. J4, 2012, 46(7): 1238-1242.
[12] 谢浩辉,麻红磊,池涌,马增益. 污泥结合水测量方法和水分分布特性[J]. J4, 2012, 46(3): 503-508.
[13] 翁焕新, 章金骏, 曹彦圣, 马学文. 污泥陶粒的性能特征与烧制工艺[J]. J4, 2011, 45(10): 1877-1883.
[14] 王勤, 严建华, 潘新潮, 池涌, 高飞. 利用热等离子体熔融垃圾焚烧飞灰[J]. J4, 2011, 45(1): 141-145.
[15] 蒋旭光, 李春雨, 池涌, 俞恺, 傅娟娟. 医疗废物焚烧过程中无机溴的迁移特性研究[J]. J4, 2010, 44(9): 1787-1792.