Please wait a minute...
浙江大学学报(工学版)
浙江大学学报(工学版)
金属学与金属工艺     
基于离散单元法的回转窑物料崩落运动及接触力链研究
陈辉1, 刘义伦1, 赵先琼1, 肖友刚2
1. 中南大学 机电工程学院, 湖南 长沙 410083；2.中南大学 交通运输工程学院,湖南 长沙 410075
Analysis on avalanching motion and force chains of bed material within rotating cylinder based on discrete element method
CHEN Hui1, LIU Yi-lun1, ZHAO Xian-qiong1, XIAO You-gang2
1. College of Mechanical and Electrical Engineering, Central South University, Changsha 410083, China; 2. College of Traffic and Transportation Engineering, Central South University, Changsha 410075, China
 全文: PDF(1644 KB)   HTML
摘要：

考虑颗粒物料的离散性质,采用离散单元法建立物料的运动模型,模拟物料的塌落和滚落运动过程,并分析物料颗粒之间的接触力分布及力链结构.结果表明：滚落模式的颗粒相互碰撞剧烈；滑移与塌落的分界线呈幂函数曲线,物料填充率过小易导致滑移；强力链约占力链总数40%,分布在物料底层近90%的厚度区域,而物料表层10%厚度为弱力链区域；塌落、滚落运动中颗粒的崩落主要发生在力链易断裂的弱力链区域；力链近似对数正态分布,切向力是导致力链断裂和表层颗粒崩落的因素.
Abstract:

Considering the discrete properties of granular materials, a kinematic model was developed for the bed materials within a rotating cylinder by the discrete element method. Slumping and rolling process of the granular materials were simulated, and then force chains and distribution of contact forces between particles were investigated. The results show that the particles under rolling patterns have serious collision. Boundary line between sliding and slumping was approximately an exponential curve,and sliding was easily caused by small filling degree. The underlying area of the bed materials (about 90% of the bed thickness) is occupied by strong force chains (about 40% of the total force chains), and the surface area of bed materials is only filled with weak force chains. In the case of slumping and rolling, avalanches of particles occur mainly in area just filled with weak force chains which are broken easily. The strength of force chains has a Log-normal distribution, and the tangential force in force chain is the factor leading to chain-breaking and granular avalanches.
出版日期: 2014-12-01
:  TF 537  
基金资助:

国家自然科学基金资助项目(51374241, 51275531);湖南省研究生科研创新资助项目(CX2014B059)
通讯作者: 刘义伦, 男, 教授, 博导     E-mail: ylliu@csu.edu.cn
作者简介: 陈辉(1984—),男,博士生,从事回转窑传热传质研究.E-mail: 57094032@qq.com
服务　　
把本文推荐给朋友
加入引用管理器
E-mail Alert
RSS
作者相关文章　　

引用本文:

陈辉, 刘义伦, 赵先琼, 肖友刚. 基于离散单元法的回转窑物料崩落运动及接触力链研究[J]. 浙江大学学报(工学版), 10.3785/j.issn.1008-973X.2014.12.025.

CHEN Hui, LIU Yi-lun, ZHAO Xian-qiong, XIAO You-gang. Analysis on avalanching motion and force chains of bed material within rotating cylinder based on discrete element method. JOURNAL OF ZHEJIANG UNIVERSITY (ENGINEERING SCIENCE), 10.3785/j.issn.1008-973X.2014.12.025.

链接本文:

http://www.zjujournals.com/eng/CN/10.3785/j.issn.1008-973X.2014.12.025    或    http://www.zjujournals.com/eng/CN/Y2014/V48/I12/2277

［1］ JAVAN D T, JIE B, NICOLAS H,et al. Modeling collective dynamics of particulate systems under time-varying operating conditions based on Markov chains ［J］. Advanced Powder Technology, 2013, 24(2): 451-458.
［2］ JOCHEN M, ECHEHARD S, LIU X Y. Prediction of rolling bed motion in rotating cylinders ［J］. AIChE Journal, 2004, 50(11): 2783-2793.
［3］ HUCKAUF H, SCHLEGEL R, HOYER L, et al. Rorschungsbericht ［R］. Magdeburg: IBU-tec GmbH Weimar/Ottovon-Guericke-Universitt Magdeburg, 1995.
［4］ HENEIN H, BRIMACOMBE J K, WATKINSON A P. The modeling of transverse solids motion in rotary kilns ［J］. Metall Urgical Transactions B, 1983, 14(B): 207220.
［5］ MELLMANN J. The transverse motion of solids in rotating cylinders-forms of motion and transition behavior ［J］. Powder Technology, 2001,118(3): 251-270.
［6］ DING Y L, FORSTER R, SEVILLE J P K, et al. Granular motion in rotating drums: bed turnover time and slumping-rolling transition ［J］. Powder Technology, 2002, 124(1/2): 18-27.
［7］ DEMAGH Y, MOUSSA H B, LACHI M, et al. Surface particle motions in rotating cylinders: Validation and similarity for an industrial scale kiln ［J］. Powder Technology, 2012, 224: 260-272.
［8］ CHENG N S, ZHOU Q, TAN S K, et al. Application of incomplete similarity theory for estimating maximum shear layer thickness of granular flows in rotating drums ［J］.Chemical Engineering Science, 2011, 66(12): 2872-2878.
［9］ LIU X Y, SPECHT E, MELLMANN J. Experimental study of the lower and upper angles of repose of granular materials in rotating drums ［J］. Powder Technology, 2005, 154(2/3): 125-131.
［10］ SPECHT E, SHI Y C, WOCHE H, et al. Experimental investigation of solid bed depth at the discharge end of rotary kilns ［J］. Powder Technology, 2010, 197(1/2): 17-24.
［11］ 曹秒艳,董国疆,赵长财.基于离散元法的固体颗粒介质传力特性研究［J］.机械工程学报,2011, 47(14): 62-69.
CAO Miao-yan, DONG Guo-jiang, ZHAO Chang-cai. Research on pressure-transfer characteristics in the solid granule medium forming based on the discrete element method ［J］. Journal of Mechanical Engineering, 2011, 47(14): 62-69.
［12］ YANG R Y, ZOU R P, YU A B. Microdynamic analysis of particle flow in a horizontal rotating drum ［J］. Powder Technology, 2003, 130(1-3): 138-146.
［13］ YANG R Y, YU A B, MCELROY L, et al. Numerical simulation of particle dynamics in different flow regimes in a rotating drum ［J］. Powder Technology, 2008, 188(2): 170-177.
［14］ FINNIE G J, KRUYT N P, YE M, et al. Longitudinal and transverse mixing in rotary kilns: A discrete element method approach ［J］. Chemical Engineering Science, 2005, 60(15): 4083-4091.
［15］ LIU P Y, YANG P Y, YU A B. DEM study of the transverse mixing of wet particles in rotating drums ［J］. Chemical Engineering Science, 2013, 86: 99-107.
［16］ GUI N, YAN J, XU W K, et al. DEM simulation and analysis of particle mixing and heat conduction in a rotating drum ［J］. Chemical Engineering Science, 2013, 97: 225-234.
［17］ BOUCHAUD J P, CATES M E, CLAUDIN P. Stress distribution in granular media and nonlinear wave equation［J］. Journal de Physique, 1995, 5: 639-656.
［18］ WALSH S D C, TORDESILLAS A, PETERS J F. Development of micromechanical models for granular media: the projection problem ［J］. Granular Matter, 2007, 9(5): 337-352.
［19］ 宜晨虹,慕青松,苗天德.重力作用下颗粒介质应力链的离散元模拟［J］.物理学报, 2009, 58(11): 7750-7755.
YI Chen-hong, MU Qing-song, MIAO Tian-de. Discrete element method simulation on the force chains in the two-dimensional granular system under gravity ［J］. ACTA PHYSICA SINICA, 2009, 58(11): 7750-7755.
［20］ SUN Q C, WANG G Q, HU K H. Some open problems in granular matter mechanics ［J］. Progress in Natural Science, 2009, 19(5): 523-529.
［21］ THORNTON C, ANTONY S J. Quasi-static shear deformation of a soft particle system ［J］. Powder Technology, 2000, 109(1-3): 179-191.
No related articles found!