Please wait a minute...
浙江大学学报(工学版)
J4  2013, Vol. 47 Issue (12): 2094-2100    DOI: 10.3785/j.issn.1008-973X.2013.12.004
电气工程     
适用于IGBT串联系统集成的驱动电路
郑晟, 蔡卓剑, 汪槱生, 钱照明
浙江大学 电气工程学院,浙江 杭州 310027
Integrated driving circuit of IGBT series connected system
ZHENG Sheng, CAI Zhuo-jian, WANG You-sheng, QIAN Zhao-ming
College of Electrical Engineering, Zhejiang University, Hangzhou 310027, China
 全文: PDF  HTML
摘要：

为了减少电力电子装置的体积和重量,提高功率密度和变换效率,且避免器件高频工作时,驱动线路寄生参数引起的电磁干扰（EMI）问题,最大限度地提高装置的性能和可靠性,有必要将绝缘栅极双极型晶体管（IGBT）串联驱动电路集成到芯片级的串联模块当中,并实现标准化大规模生产.通过对现有IGBT串联驱动辅助电源拓扑的归纳总结和横向比较表明：在体积、价格和结构复杂程度上,非隔离型的IGBT串联驱动辅助电源均较隔离型的IGBT串联驱动辅助电源有较大优势,因而认为其更适合集成化的串联系统,并在此基础上针对性地提出了自举型驱动辅助电源拓扑,并给出了关键参数的设计方法和可能存在的技术问题及解决方案，这有利于器件（IGBT）串联技术能更有效地应用到中高压、大功率变换装置的工程实践.
Abstract:

Comparing the existing IGBT driver circuit topologies, it concludes that the non-isolated IGBT driver is more suitable for integrated circuit than the isolated IGBT driver on the volume, cost and topology complexity. A novel driving auxiliary power supply topology was proposed.This circuit can bootstrap power level by level, but the duty cycle and the turn-on period will be limited by the input and output capacitance. It is necessary to estimate the electric charge of driving circuit and then to calculate the critical parameters, such as input and output capacitance. In addition, the bootstrap driving auxiliary power supply may make the protection circuit malfunction when energy needs to bootstrap up through the IGBT. This issue can be resolved through two different scenarios. So this topology makes the technology of IGBT series connection more efficient and possible to be used in the area of the high-voltage, high power power conversion.
出版日期: 2013-12-01
:  TM 46  
通讯作者: 钱照明,男,教授,博导.     E-mail: qian@zju.edu.cn
作者简介: 郑晟（1985—）,男,博士生,从事中高压电力电子变流技术、器件串联技术的研究.E-mail: zhengowen@zju.edu.cn
服务　　
把本文推荐给朋友
加入引用管理器
E-mail Alert
RSS
作者相关文章　　

引用本文:

郑晟, 蔡卓剑, 汪槱生, 钱照明. 适用于IGBT串联系统集成的驱动电路[J]. J4, 2013, 47(12): 2094-2100.

ZHENG Sheng, CAI Zhuo-jian, WANG You-sheng, QIAN Zhao-ming. Integrated driving circuit of IGBT series connected system. J4, 2013, 47(12): 2094-2100.

链接本文:

http://www.zjujournals.com/eng/CN/10.3785/j.issn.1008-973X.2013.12.004    或    http://www.zjujournals.com/eng/CN/Y2013/V47/I12/2094

［1］ BAEK J W, YOO D W, KIM H G. High-voltage switch using series-connected IGBTs with simple auxiliary circuit［J］. IEEE Transactions on Industry Applications, 2001, 37(6): 1832-1839.

［2］ PALMER P R, GITHIARI A N. The series connection of IGBTs with active voltage sharing［J］. IEEE Transactions on Power Electronics, 1997, 12(4): 637-644.

［3］ ZORNGIEBEL V, SPAHN E, BUDERER G, et al. Compact high voltage IGBT switch  for  pulsed  power applications ［J］. IEEE Transactions on Magnetics, 2009, 45(1): 531-535.

［4］ SASAGAWA K, ABE Y, MATSUSE K. Voltage-balancing method for IGBTs connected in series ［J］. IEEE Transactions on Industry Applications, 2004, 40(4): 1025-1030.

［5］ CASTAGNO S, CURRY R D, LOREE E. Analysis and comparison of a fast turn-on Series IGBT stack and high-voltage-rated commercial IGBTs［J］. IEEE Transactions Plasma Science, 2006, 34(5): 1692-1696.

［6］ SAIZ J, MERMET M, FREY D, et al. Optimization and integration of an active clamping circuit for IGBT series association［C］∥ Proceedings of IAS 2001. ［S. l.］：［s. n.］, 2001: 1046-1051.

［7］ ZHENG Sheng, WANG You-sheng, WU Xin-ke, et al. The voltage sharing of commercial IGBTS in series with passive components［C］∥ Proceedings of ECCE 2011. ［S. l.］：［s. n.］, 2011: 3008-3012.

［8］ 夏凌辉.新型多路输出高压隔离电源及其在固态短路限流器中的应用［D］.杭州：浙江大学, 2004.

XIA Ling-hui. A new kind of power supply with isolated and multiple outputs, which can be applied to the soild state fault current limiter ［D］. Hangzhou: Zhejiang University, 2004.

［9］ 王夏.用于分布式高压隔离辅助电源的电流型开关变化器研究［D］.杭州：浙江大学, 2006.

WANG Xia. The research of current type power converter as high-voltage and isolated driver power supply ［D］. Hangzhou: Zhejiang University, 2006.

［10］ 杨仲望.中等功率高压隔离电源以及电流输入型稳压二次侧研究［D］.杭州：浙江大学,2007.

YANG Zhong-wang. The research focus on middle-power level high-voltage isolation power systems and the relative second side power systems with current input source ［D］. Hangzhou: Zhejiang University, 2007.

［11］ JANG S R, AHN S H, RYOO H J, et al. A comparative study of the gate driver circuits for series stacking of semiconductor switches［C］∥ Proceedings of IPMHVC 2010. ［S. l.］：［s. n.］, 2010: 322-326.

［12］ VAN NGUYEN T, JEANNIN P, VAGNON E, et al. Series connection of IGBTs with self-powering technique and 3-D topology［J］. IEEE Transactions on Industry Applications, 2011, 47(4): 1844-1852.
[1] 孟培培, 张军明, 钱照明. Boost变流器共模传导干扰建模与预测[J]. J4, 2012, 46(10): 1851-1856.
[2] 孟培培,张军明,陈恒林,钱照明. 反激变流器共模干扰的建模与预测[J]. J4, 2012, 46(9): 1702-1707.