[1] 薛忠明, 曲文卿, 柴鹏, 等. 焊接变形预测技术研究进展[J]. 焊接学报, 2003, 24(3): 87-90.
XUE Zhong-ming, QU Wen-qing, CAI Peng, et al. Review on prediction of welding distortion [J]. Transactions of the China Welding Institution, 2003, 24(3): 87-90.
[2] 张建勋, 刘川, 张林杰. 焊接非线性大梯度应力变形的高效计算技术[J]. 焊接学报, 2009, 6(30): 107-112.
ZHANG Jian-xun, LIU Chuan, ZHANG Lin-jie. Efficient calculation technologies for welding stress and deformation with nonlinear and gradient character [J]. Transactions of the China Welding Institution, 2009, 6(30): 107-112.
[3] 刘川, 王蕊, 张建勋. 堆焊角变形动态过程试验与数值分析[J]. 西安交通大学学报, 2007, 41(9):1017-1021.
LIU Chuan, WANG Rui, ZHANG Jian-xun. Numerical simulation and testing of dynamic welding angular distortion for overlayer [J]. Journal of Xi`an Jiaotong University, 2007, 41(9):1017-1021.
[4] WANG J, UEDA Y, MURAKAWA H, et al. Improvement in numerical accuracy and stability of 3-D FEM analysis in welding [J]. Welding Journal, 1996, 75: 129-134.
[5] MICHALERIS P. Modelling welding residual stress and distortion: current and future research trends [J]. Science and Technology of Welding and Joining, 2011, 16(4): 363-368.
[6] DENG Dean, MURAKAWA Hidekazu, LIANG Wei. Numerical simulation of temperature field and residual stress in multi-pass welds in stainless steel pipe and comparison with experimental measurements [J]. Computational Materials Science, 2006, 37(3): 269-277.
[7] DENG Dean. FEM prediction of welding residual stress and distortion in carbon steel considering phase transformation effects [J]. Materials & Design, 2009, 30(2): 359-366.
[8] GERY D, LONG H, MAROPOULOS P. Effects of welding speed, energy input and heat source distribution on temperature variations in butt joint welding [J]. Journal of Materials Processing Technology, 2005, 167: 393-401.
[9] LONG H, GERY D, CARLIER A, MAROPOULOS P G. Prediction of welding distortion in butt joint of thin plates [J]. Materials & Design, 2009, 30(10): 4126-4135.
[10] 张利国, 姬书得, 方洪渊, 等. 焊接顺序对T形接头焊接残余应力场的影响[J]. 机械工程学报, 2007, 43(2): 234-238.
ZHANG Li-guo, JI Shu-de, FANG Hong-yuan, et al. Influence of welding sequence on welding stress of T joint [J]. Chinese Journal of Mechanical Engineering, 2007, 43(2):234-238.
[11] ZHOU Guang-tao, LIU Xue-song, JIN Cheng, et al. Welding deformation controlling of aluminum-alloy thin plate by two-direction pre-stress method [J]. Materials Science and Engineering A, 2009, 499: 147-152.
[12] 李亚江, 刘强, 王娟. 气体保护焊工艺及应用[M]. 北京: 化学工业出版社, 2009: 106-108. |