Please wait a minute...
浙江大学学报(工学版)
J4  2013, Vol. 47 Issue (4): 692-697    DOI: 10.3785/j.issn.1008-973X.2013.04.020
能源工程     
考虑透射噪声的内燃机薄壁件声学预测方法
郑康, 郝志勇, 毛杰, 王连生
浙江大学 能源工程学系,浙江 杭州 310027
Acoustic prediction method of engine thin-walled parts considering transmission noise
ZHENG Kang, HAO Zhi-yong, MAO Jie, WANG Lian-sheng
Department of Energy Engineering, Zhejiang University, Hangzhou 310027, China
 全文: PDF  HTML
摘要：

为了准确地预测内燃机薄壁件的声学性能,利用多体动力学方法获得某柴油机齿轮室罩的螺栓激励,通过有限元法计算得到该齿轮室罩的表面振动速度.结合声辐射效率计算该件的辐射声功率.通过研究该齿轮室罩装配状态下的隔声量后发现,在某几个频率下隔声量会迅速减小,透射量与混响声源的声压成正比且非线性关系.将实验测得的齿轮室罩声压作为边界条件,计算该齿轮室罩的透射噪声,将透射噪声和螺栓激励引起的表面辐射噪声耦合获得的总声功率更接近实际情况.
Abstract:

The multi-body dynamic method was used to obtain excitations from joints of gear case in order to predict the acoustic performance of engine thin-walled parts. The vibration speed on surface of the gear case was calculated with finite element method (FEM) under the excitations. Acoustic power of the part was predicted based on the vibration speed and acoustic radiation efficiency. Research on the sound transmission loss under constrained condition shows its loss rapidly decreases on certain frequencies and the loss has direct ratio and nonlinear relations with acoustic pressure value of reverberation source. The transmission noise was calculated using the acoustic pressure from sound intensity test of the engine. The transmission noise results coupled with acoustic power excited through joints made up the total acoustic power of the thin-walled part. Considering the effect of the transmission noise made the total acoustic power prediction more credible.
出版日期: 2013-04-01
:  U 263.14  
通讯作者: 郝志勇,男,博导.     E-mail: Haozy@zju.edu.cn
作者简介: 郑康（1986—）,男,博士生,从事内燃机强度及NVH的研究. E-mail: 10927035@zju.edu.cn
服务　　
把本文推荐给朋友
加入引用管理器
E-mail Alert
RSS
作者相关文章　　

引用本文:

郑康, 郝志勇, 毛杰, 王连生. 考虑透射噪声的内燃机薄壁件声学预测方法[J]. J4, 2013, 47(4): 692-697.

ZHENG Kang, HAO Zhi-yong, MAO Jie, WANG Lian-sheng. Acoustic prediction method of engine thin-walled parts considering transmission noise. J4, 2013, 47(4): 692-697.

链接本文:

http://www.zjujournals.com/eng/CN/10.3785/j.issn.1008-973X.2013.04.020    或    http://www.zjujournals.com/eng/CN/Y2013/V47/I4/692

［1］ 张磊,任海军,艾晓玉,等.发动机薄壁件结构振动优化［J］.振动工程学报, 2010, 23(6): 687-697.

ZHANG Lei, REN Hai-jun, AI Xiao-yu, et al. Vibration optimization on engine covers ［J］. Journal of Vibration Engineering, 2010, 23(6): 687-697.

［2］ 蔡相儒,魏长生,沈秀奇,等.发动机子声源隔声识别法的研究及应用［J］.内燃机工程,2010,31(4): 105-108.

CAI Xiang-ru, WEI Chang-sheng, SHEN Xiu-qi, et al. Research and application of engine sub-sound source noise-isolation identification ［J］. Chinese Internal Combustion Engine Engineering, 2010, 31(4): 105-108.

［3］ 贾维新,郝志勇,杨金才.虚拟预测方法在柴油机低噪声设计中的应用［J］.浙江大学学报：工学版,2007,41(3): 489-493.

JIA Wei-xin, HAO Zhi-yong, YANG Jin-cai. Application of virtual prediction method to low-noise diesel engine design ［J］. Journal of Zhejiang University: Engineering Science, 2007, 41(3): 489-493.

［4］ 贾维新,郝志勇,杨金才.基于形貌优化的低噪声油底壳设计研究［J］.浙江大学学报：工学版,2007,41(5): 770-773.

JIA Wei-xin, HAO Zhi-yong, YANG Jin-cai. Low noise design of oil pan based on topography optimization ［J］. Journal of Zhejiang University: Engineering Science, 2007, 41(5): 770-773.

［5］ 刘月辉,郝志勇,付鲁华,等.车用发动机表面辐射噪声的研究［J］.汽车工程,2002, 24(3): 213-216.

LIU Yue-hui, HAO Zhi-yong, FU Lu-hua, et al. A study on engine radiated noise ［J］. Automotive Engineering, 2002, 24(3): 213-216.

［6］ 杨陈,郝志勇,陈馨蕊. 柴油机机体辐射噪声预测及低噪声改进设计［J］. 江苏大学学报：自然科学版,2008, 29(4): 301-303,321.

YANG Chen, HAO Zhi-yong, CHEN Xin-rui. Prediction of engine block’s radiation noise and low-noise design ［J］. Journal of Jiangsu University: Natural Science Edition, 2008, 29(4): 301-303,321.

［7］ 贾维新,郝志勇,杨金才.发动机油底壳辐射噪声预测方法的研究［J］.内燃机学报,2005, 23(3): 269273.

JIA Wei-xin, HAO Zhi-yong, YANG Jin-cai. Research on prediction method of radiated noise of engine oil pan ［J］. Transactions of CSICE， 2005, 23(3): 269-273.

［8］ 吴炎庭,袁卫平.内燃机振动噪声与控制［M］.北京：机械工业出版社,2005: 3955.

［9］ 韩松涛,郝志勇.6102B型柴油机曲轴三维有限元模态分析与试验研究［J］.农业机械学报,2001, 32(4) : 74-77.

HAN Song-tao, HAO Zhi-yong. Mode analysis of three-dimensional finite element and experimental study on a 6102B diesel engine crankshaft ［J］. Transactions of the Chinese Society of Agricultural Machinery, 2001, 32(4): 74-77.

［10］ 郭磊.车用动力总成结构振动噪声的虚拟预测与分析技术研究［D］.杭州：浙江大学,2009: 12-14,54-55.

GUO lei. Investigation on powertrain structure’s vibration and noise performance based on virtual forecast technology ［D］. Hangzhou: Zhejiang University, 2009: 12-14, 54-55.

［11］ 舒歌群,马维忍,梁兴雨,等.柴油机薄壁件表面辐射噪声的研究［J］.内燃机工程，2009,30(2): 25-28,33.

SHU Ge-qun, MA Wei-ren, LIANG Xing-yu, et al. Radiation noise of external thin-wall components in diesel engine ［J］. Chinese Internal Combustion Engine Engineering, 2009, 30(2): 25-28,33.

［12］ 张重超,杨玉致,朱梦周.机电设备噪声控制工程学［M］.北京：轻工业出版社，1989: 35-92.

［13］ 梁新华.汽车车身薄壁件阻尼复合结构振动-声学分析与优化［D］.上海：上海交通大学,2007: 44-47.

LIANG Xin-hua. Vibro-acoustic analysis and optimization of damping panel in auto-body ［D］. Shanghai: Shanghai Jiaotong University, 2007: 44-47.

［14］ 盛美萍,王敏庆,孙进才.噪声与振动控制技术基础［M］.北京:科学出版社,2001: 68-75.

［15］ 郝志勇,韩军.车用发动机主要噪声源的声强测试方法研究［J］.内燃机工程,2004,25(2): 15-17,22.

HAO Zhi-yong, HAN Jun. Investigation on noise sources identification of diesel engine by means of acoustic signals analysis ［J］. Chinese Internal Combustion Engine Engineering, 2004, 25(2) :15-17,22.
No related articles found!