Please wait a minute...
浙江大学学报(工学版)
J4  2013, Vol. 47 Issue (1): 174-181    DOI: 10.3785/j.issn.1008-973X.2013.01.025
电气工程     
超声波电动机定子振动能量回收转换特性
王光庆1, 陆跃明1, 郭吉丰2
1. 浙江工商大学 信息与电子工程学院,浙江 杭州 310018；2. 浙江大学 电气工程学院,浙江 杭州 310027
Vibration energy harvesting performances of ultrasonic motor stator
WANG Guang-qing1, LU Yue-ming1, GUO Ji-feng2
1.College of Information and Electronics Engineering, Zhejiang Gongshang University, Hangzhou 310018, China;
2. College of Electrical Engineering, Zhejiang University, Hangzhou 310027, China
 全文: PDF  HTML
摘要：

 为了向密封、恶劣等极端环境中工作的微型机器人提供驱动力矩和电能,根据行波型超声波电机定子孤极频率反馈跟踪原理,研制能量回馈型超声波电机.与传统超声波电机相比,该电机不仅具有驱动功能,还具有将定子振动能量回收并转换成电能的功能.根据能量回馈型超声波电机驱动原理改进了超声波电动机压电陶瓷的极化分区模式,将超声波电机定子压电陶瓷极化分成3个区,即：激振区、能量采集区和传感区（孤极）.利用定子能量采集区压电陶瓷的正压电效应采集回收超声波电动机定子的机械振动能量.根据铁摩辛柯梁理论和压电本构方程建立超声波电动机定子振动能量采集回收的理论分析模型,研究能量采集区压电陶瓷负载阻抗的匹配问题.利用该模型仿真分析了电机激励频率、激振电压、外接负载电阻等对能量采集区压电陶瓷输出电压、输出电流和输出功率的影响规律,通过实验验证了仿真结果的正确性.
Abstract:

 In order to provide the actuating torque and electrical power for the micro-robot operating in the sealed and harsh environment, an energy-recycling type ultrasonic motor (USM) was developed according to the frequency automatic tracking principle of the stator isolated electrode of traveling wave type USM. Compared with the traditional USM, the proposed USM not only has driving function, but also has the function of harvesting the vibration energy and converting it into the electrical power. The polarization pattern of the piezoelectric ceramic (PZT) was modified according to the operating principle of the energy-recycling type USM. The PZT was divided into three sectors, namely exciting sector, the energy harvesting sector and the sensor sector (or isolated sector), respectively. The mechanical vibration energy of the USM stator was harvested by the energy harvesting sector PZT by using the piezoelectric effect. The theoretical model of the vibration energy harvester of the USM stator was derived based on the Timoshenko beam theory and the piezoelectric equation. Consequently, the impedance match of the energy harvesting sector of PZT was analyzed. The effects of the exciting frequency, exciting voltage and resistance load of the USM on the output voltage, output current and output power of the energy harvesting sector of PZT were analyzed based on the model. Experiments were conducted to test the validities of the simulation results.
出版日期: 2013-01-01
:  TM 356  
基金资助:

国家自然科学基金资助项目（51277165）;浙江省自然基金资助项目(Y1080037)；浙江省高校优秀青年教师资助项目；浙江工商大学青年人才资助项目.
作者简介: 王光庆（1975-）,男,副教授,从事超声波电动机的研究.E-mail:kele76@163.com
服务　　
把本文推荐给朋友
加入引用管理器
E-mail Alert
RSS
作者相关文章　　

引用本文:

王光庆, 陆跃明, 郭吉丰. 超声波电动机定子振动能量回收转换特性[J]. J4, 2013, 47(1): 174-181.

WANG Guang-qing, LU Yue-ming, GUO Ji-feng. Vibration energy harvesting performances of ultrasonic motor stator. J4, 2013, 47(1): 174-181.

链接本文:

http://www.zjujournals.com/eng/CN/10.3785/j.issn.1008-973X.2013.01.025    或    http://www.zjujournals.com/eng/CN/Y2013/V47/I1/174

［1］ 张鹏飞, 闫利慧, 张珏. 管道机器人驱动与控制检测系统设计［J］. 科技创新导报, 2010, 26: 15-16．
ZHANG Peng-fei, YAN Li-hui, ZHANG Jue. Design of driving and detection control system for pipe inspection robot ［J］. Science and Technology Innovation Herald, 2010, 26:15-16．
［2］ 穆晓风, 顾大强, 陈柏,等. 血管微型机器人无损伤体内驱动方法［J］. 浙江大学学报:工学版, 2005,39(5): 618-622．
MU Xiao-feng, GU Da-qiang, CHEN Bai, et al. New minimal invasive drive method of vascular microrobot ［J］. Journal of Zhejiang University: Engineering Science, 2005, 39(5): 618-622．
［3］ ANTONIO I, MASSIMO P. A highpower traveling wave ultrasonic motor ［J］. IEEE Transactions on Ultrasonic, Ferroelectrics, and Frequency Control, 2007, 53(7): 1344-1351．
［4］ SIMONE P, ROSARIO S, ALBERTO M. Evaluation of the effect of preload force on resonance frequencies for a traveling wave ultrasonic motor ［J］. IEEE Transactions on Ultrasonic, Ferroelectrics, and Frequency Control, 2006, 53(4): 746-753．
［5］ SUN Z J, SHUAI S H, HUANG W Q. Control of robot driver by multiple ultrasonic motors based on robust parameter design ［J］. Transactions of Nanjing University of Aeronautics and Astronautics, 2009, 26(4): 243-250．
［6］ 胡敏强, 金龙, 顾菊萍. 超声波电机原理与设计［M］. 北京: 科学出版社,2005: 52-56．
［7］ 陈永校, 郭吉丰. 超声波电动机［M］. 杭州: 浙江大学出版社,1994: 86-95．
［8］ 王光庆, 沈润杰, 郭吉丰. 压电陶瓷对超声波电动机定子特性的影响［J］. 机械工程学报, 2010,46(4): 8-14．
WANG Guang-qing, SHEN Run-jie, GUO Jifeng. Effects of piezoelectric ceramic on the stator perform aces of ultrasonic motor ［J］. Journal of Mechanical Engineering, 2010, 46(4): 8-14.
［9］ 王矜奉, 姜祖桐, 石瑞大, 等. 压电振动［M］. 北京: 科学出版社, 1989: 19-20．
［10］ 王光庆, 陆国丽, 郭吉丰. 基于能量等效的行波型超声波电动机解析模型［J］. 机械工程学报, 2008, 44(2): 74-81．
WANG Guangqing, LU Guoli, GUO Jifeng. Analytical model of traveling wave ultrasonic motor based on the energy equivalent method ［J］. Journal of Mechanical Engineering, 2008, 44(2): 74-81.
［11］ INGO K, DJORDDJE M, GERALD E, et al. A new approach for MEMS power generation based on a piezoelectric diaphragm ［J］. Sensors and Actuators A: Physical, 2008, 142(1): 292-297．
［12］ 王强, 骆英, 顾建祖. 基于压电材料的振动能量获取技术的研究［J］. 电子元件与材料, 2008, 27(3): 47-50．
WANG Qiang, LUO Ying, GU Jian-zu. Research on harvested technique of vibration energy based on piezoelectric materials ［J］. Electronic Components and Materials, 2008, 27(3): 47-50．
［13］ 阙君武, 唐可洪, 王淑云, 等. 压电悬臂梁发电装置的建模与仿真分析［J］. 光学精密工程, 2008, 16(1): 71-75．
KAN Jun-wu, TANG Ke-hong, WANG Shu-yun, et al. Modeling and simulation of piezoelectric cantilever generators ［J］. Optics and Precision Engineering, 2008, 16(1): 71-75．
[1] 白洋, 王剑, 王班, 郭吉丰. 新型旋转-直线超声波电机的机理与特性[J]. J4, 2013, 47(10): 1852-1856.