Please wait a minute...
J4  2012, Vol. 46 Issue (12): 2184-2188    DOI: 10.3785/j.issn.1008-973X.2012.12.007
能源工程     
基于FE-SEA混合法的
汽车镁合金前围板隔声量数值计算
毛杰, 郝志勇, 卢兆刚, 陈馨蕊
浙江大学 能源工程学系,浙江 杭州 310027
Sound insulation numerical calculation of an automobile
magnesium alloy dash based on FE-SEA hybrid method
MAO Jie, HAO Zhi-yong, LU Zhao-gang, CHEN Xin-rui
Department of Energy Engineering, Zhejiang University, Hangzhou 310027, China
 全文: PDF  HTML
摘要:

为研究中频域的结构噪声,采用有限元统计能量分析(FE-SEA)混合法对汽车板件的隔声性能进行了研究,该方法具备适用于低频域的有限元或边界元法和适用于高频域的统计能量分析的优点.结合混合法理论,建立克莱斯勒Viper跑车镁合金压铸前围板的混合模型,验证该方法应用于汽车车身薄壁件中低频隔声量计算的可行性.对混合模型的入射侧施加混响声场(DAF)作为声激励,在透射侧施加半自由声场(SIF)作为功率接收器,由数值计算结果得到前围板中低频率范围内的隔声量曲线,与试验结果对比,表明两者结果基本吻合,从而很好地证明了有限元统计能量混合法用于解决本模型的中频声学问题的可行性.介绍了区域声学包装法,即在隔声量曲线低谷频率范围(100~500 Hz)内,将简易声学包装施加到结构表面振动速度较大处,可以有效地优化前围板的总体隔声性能.

Abstract:

In order to solve the structure-borne noise in middle frequency range, an advanced method named hybrid finite element-statistical energy analysis (FE-SEA) was introduced to calculate the sound insulation performance of automobile components. This method possesses the advantages of finite element method or boundary element method for low frequency range and statistical energy analysis for high frequency range. According to the FE-SEA theory, a hybrid model of the Chrysler Viper magnesium alloy dash was built to validate whether the hybrid method was feasible to calculate the sound transmission loss of automobile body panel in middle frequency range. Diffuse acoustic field (DAF) was applied to the incident side of hybrid model as the acoustic excitation and semi infinite field (SIF) was applied to the transmitted side as the sound power receptor. The result of numerical calculation agreed well with that of experiment, which validated the feasibility of the hybrid FE-SEA method in solving the mid-frequency acoustic problems of the dash panel. Finally, the application of regional sound package method shows the advantage and convenience to optimize the surface vibration around the frequency of sound transmission loss curve trough (100~500 Hz) in order to get a better sound insulation quality.

出版日期: 2012-12-01
:  TB 532  
基金资助:

国际科技合作资助项目(2007DFB50150-2).

通讯作者: 郝志勇,男,教授,博导.     E-mail: haozy@zju.edu.cn
作者简介: 毛杰(1987—),男,博士生,从事汽车与发动机振动噪声研究.E-mail: maojie1987@zju.edu.cn
服务  
把本文推荐给朋友
加入引用管理器
E-mail Alert
RSS
作者相关文章  

引用本文:

毛杰, 郝志勇, 卢兆刚, 陈馨蕊. 基于FE-SEA混合法的
汽车镁合金前围板隔声量数值计算[J]. J4, 2012, 46(12): 2184-2188.

MAO Jie, HAO Zhi-yong, LU Zhao-gang, CHEN Xin-rui. Sound insulation numerical calculation of an automobile
magnesium alloy dash based on FE-SEA hybrid method. J4, 2012, 46(12): 2184-2188.

链接本文:

http://www.zjujournals.com/eng/CN/10.3785/j.issn.1008-973X.2012.12.007        http://www.zjujournals.com/eng/CN/Y2012/V46/I12/2184

[1] WANG Y S, LEE C M, KIM D G, et al. Soundquality prediction for nonstationary vehicle interior noise based on wavelet preprocessing neural network model [J]. Journal of Sound and Vibration, 2007, 299(4/5): 933-947.

[2] SHIN S H, CHEONG C. Experimental characterization of instrument panel buzz, squeak and rattle (BSR) in a vehicle[J]. Applied Acoustics, 2010, 71(12): 1162-1168.
[3] ZHANG Y, LAI X, ZHU P, et al. Lightweight design of automobile component using high strength steel based on dent resistance [J]. Materials & Design, 2006, 27(1): 64-68.
[4] LANGLEY R. A general derivation of the statistical energy analysis equations for coupled dynamic systems [J]. Journal of Sound and Vibration, 1989, 135(3): 499-508.
[5] SHORTER P, GARDNER B, BREMNER P. A hybrid method for full spectrum noise and vibration prediction [J]. Journal of Computational Acoustics, 2003, 11(2): 323-338.
[6] 卢兆刚.基于混合FESEA方法的汽车薄壁件中频声学特性预测及优化研究[D].杭州:浙江大学,2011: 13-15.
LU Zhaogang. The prediction and optimization of the midfrequency acoustic problems on the automobile thinwall components based on the hybrid FESEA method [D]. Hangzhou: Zhejiang University, 2011: 13-15.
[7] SHORTER P, LANGLEY R. On the reciprocity relationship between direct field radiation and diffuse reverberant loading[J]. Journal of Acoustic. Society of America, 2005, 117 (1): 85-89
[8] COTONI V, SHORTER P, LANGLEY R. Numerical and experimental validation of a hybrid finite elementstatistical energy analysis method [J]. Journal of the Acoustical Society of America, 2007, 122(1): 259-270.
[9] 陈书明,王登峰,曹晓琳,等.车内噪声FESEA混合建模及分析方法[J].振动工程学报,2010,23(2): 140-144.
CHEN Shuming, WANG Dengfeng, CAO Xiaolin, et al. Hybrid FESEA modeling and analysis method of car interior noise [J]. Journal of Vibration Engineering, 2010, 23(2): 140-144.
[10] 罗放,杨德庆,戴浪涛.基于混和法的齿轮箱基座动力学特性全频域计算[J].舰船科学技术,2009, 31(2): 71-75.
LUO Fang, YANG Deqing, DAI Langtao. Dynamics calculation of gearbox mounting based on FESEA hybrid method inbroadband frequency domain [J]. Ship Science and Technology, 2009, 31(2): 71-75.
[11] 陈馨蕊,郝志勇,杨陈,等.结构声耦合法在汽车前围板隔声性能仿真分析中的应用[J].振动与冲击,2009, 28(8): 154-157.
CHEN Xinrui, HAO Zhiyong, YANG Chen, et al. Simulation on sound insulation performance analysis of automobile dash by using structuresound interaction method [J]. Journal of Vibration and Shock, 2009, 28(8): 154-157.
[12] 陈家瑞.汽车构造(下册)[M].北京:机械工业出版社,2009: 374-381.
[13] 马大猷.噪声控制学[M].北京:科学出版社,1987: 256-254.
[14] DOUTRES O, ATALLA N. Experimental estimation of the transmission loss contributions of a sound package placed in a double wall structure [J]. Applied Acoustics, 2011, 72 (6): 372-379.
[15] 何琳,朱海潮,邱小军,等.声学理论与工程应用[M].北京:科学出版社, 2006: 105-108.

[1] 徐亮, 陈心昭, 毕传兴, 等. 近场声全息分辨率增强的正交球面波插值方法[J]. J4, 2009, 43(10): 1808-1811.