Please wait a minute...
浙江大学学报(工学版)
J4  2012, Vol. 46 Issue (9): 1708-1714    DOI: 10.3785/j.issn.1008-973X.2012.09.025
电气工程     
面装极宽调制式永磁电机齿槽转矩研究
安跃军,安辉,李勇,孙丹,赵文强
沈阳工业大学 电气工程学院,辽宁 沈阳 110870
Study on the cogging torque of surface-mounted permanent
magnet motor with pole-width modulation structure
AN Yue-jun, AN Hui, LI Yong, SUN Dan, ZHAO Wen-qiang
School of Electrical Engineering, Shenyang University of Technology, Shenyang 110870,China
 全文: PDF  HTML
摘要：

为了抑制面装式永磁电机的齿槽转矩,在对比了抑制齿槽转矩常用方法的基础上,提出永磁体正弦极宽调制方法,结合实例样机设计面装式永磁电机永磁转子极宽调制结构、尺寸和参数.利用有限元方法对传统面装式永磁电机和极宽调制式永磁电机内部电磁场进行计算,得到2种结构的永磁电机气隙磁场波形和齿槽转矩特性曲线；与传统面装式永磁电机相比，极宽调制方法可使气隙磁场波形正弦化程度提高38.98%；研制传统面装式永磁电机和极宽调制式永磁电机样机,并设计构建一个由角度传感器、扭矩扳手和样机电机组成的齿槽转矩实用测试系统,对2种不同结构样机的齿槽转矩进行了实验检测.对于2种实例样机,与传统面装式永磁电机相比，有限元分析计算结果和实验结果表明,正弦极宽调制方法可以使齿槽转矩分别降低30.5%和30.9%，可见永磁体正弦极宽调制方法是一种抑制面装式永磁电机齿槽转矩的有效方法之一.
Abstract:

In order to suppress the cogging torque of surface-mounted permanent magnet motor, a permanent magnet sinusoidal pole-width modulation method was proposed based on contrast of various methods which is commonly used to suppress cogging torque. Combined with the prototype structure, the size and parameters of the surface-mounted permanent magnet motor with pole-width modulation rotor were designed. The air gap magnetic waveform and the cogging torque characteristic curve of the traditional surfacemounted permanent magnet motor and pole-width modulated permanent magnet motor were obtained by using finite element method to calculate the electromagnetic fields of these two permanent magnet motor structures respectively. The polewidth modulation method can improve the sine degree of the air-gap magnetic field wave by 38.98% compared with the traditional surface-mounted permanent magnet motor. Two prototypes were developed for these two motors respectively. The cogging torque experiments of these two motors were done by a system consists of angle sensor, torque wrenches and permanent magnet motor. As far as the two prototypes were concerned, the finite element analysis and the experimental results showed that the sinusoidal pole-width modulation method decreased the cogging torque by 30.5% and 30.9% respectively, compared with the traditional surface-mounted permanent magnet motor. The result indicates that the permanent magnet sinusoidal pole-width modulation method is an effective method for suppressing the cogging torque of surface-mounted permanent magnet motor.
出版日期: 2012-09-01
:  TM 301  
基金资助:

辽宁省科学技术计划资助项目（2010220011）；沈阳市科学技术计划资助项目（F11-190-7-00）.
作者简介: 安跃军（1962-），男，教授，主要从事特种电机及其控制领域的教学与科研工作.E-mail：anyj_dq@sut.edu.cn
服务　　
把本文推荐给朋友
加入引用管理器
E-mail Alert
RSS
作者相关文章　　

引用本文:

安跃军,安辉,李勇,孙丹,赵文强. 面装极宽调制式永磁电机齿槽转矩研究[J]. J4, 2012, 46(9): 1708-1714.

AN Yue-jun, AN Hui, LI Yong, SUN Dan, ZHAO Wen-qiang. Study on the cogging torque of surface-mounted permanent
magnet motor with pole-width modulation structure. J4, 2012, 46(9): 1708-1714.

链接本文:

http://www.zjujournals.com/eng/CN/10.3785/j.issn.1008-973X.2012.09.025    或    http://www.zjujournals.com/eng/CN/Y2012/V46/I9/1708

［1］ 周俊杰, 范承志, 叶云岳, 等. 基于斜磁极的盘式永磁电机齿槽转矩削弱方法［J］.浙江大学学报：工学版, 2010, 44(8):1548-1552．
ZHOU Junjie, FAN Chengzhi, YE Yunyue, et al. Method for reducing cogging torque based on magnet skewing in disctype permanent magnet motors［J］. Journal of Zhejiang University:Engineering Science, 2010, 44(8):1548-1552.
［2］ 程树康, 宫海龙, 柴凤, 等.永磁轮毂电机齿槽转矩研究［J］.中国电机工程学报, 2009, 29(30):47-51．
CHENG Shukang, GONG Hailong, CHAI Feng, et al. Study on cogging torque of permanent magnet inwheel motor ［J］. Proceedings of the CSEE, 2009, 29(30):47-51．
［3］ 杨玉波, 王秀和, 张鑫, 等.磁极偏移削弱永磁电机齿槽转矩方法［J］.电工技术学报, 2006, 21(10):22-25．
YANG Yubo, WANG Xiuhe, ZHANG Xin, et al. Cogging torque reduction method of shifting in permanent magnet motors ［J］. Transactions of China Electrotechnical Society, 2006, 21(10):22-25．
［4］ 张颖, 林明耀. 定子齿表面开槽对永磁无刷直流电机齿槽转矩的影响［J］.电气技术, 2008(1):16-19．
ZHANG Ying, LIN Mingyao. Influence of slotting on the teeth on the cogging torque of permanent magnetic brushless DC motor ［J］. Electrical Engineering, 2008(1):16-19．
［5］ 杨玉波, 王秀和, 陈谢杰, 等. 基于不等槽口宽配合的永磁电动机齿槽转矩削弱方法［J］.电工技术学报, 2005, 20(3):40-44．
YANG Yubo, WANG Xiuhe, CHEN Xiejie, et al. A method for reducing cogging torque by different slot widths in permanent magnet motors ［J］. Transactions of China Electrotechnical Society, 2005, 20(3):40-44．
［6］ 杨玉波, 王秀和, 丁婷婷, 等.极弧系数组合优化的永磁电机齿槽转矩削弱方法［J］.中国电机工程学报, 2007,27(6):7-11．
YANG Yubo, WANG Xiuhe, DING Tingting, et al. Analysis of the optimization of the pole arc combination to reduce the cogging torque in PM motors ［J］. Proceedings of the CSEE, 2007, 27(6):7-11．
［7］ 王兴华, 励庆孚, 石山. 永磁电机磁阻转矩的抑制方法［J］.西安交通大学学报, 2002, 36(6)：576-579．
WANG Xinghua, LI Qingfu, SHI Shan. Method of reducing cogging torque in permanent magnet motor ［J］.Journal of Xian Jiaotong University, 2002, 36(6):576-579．
［8］ 王成元, 王贵子, 夏加宽. 机床转台直接驱动力矩电机的转矩优化设计［J］.沈阳工业大学学报, 2008, 30(1):6-10．
WANG Chengyuan, WANG Guizi, XIA Jiakuan. Torque optimization of direct drive torque motor for machine rotary table ［J］. Journal of Shenyang University of Technology, 2008, 30(1):6-10．
［9］ 梁中华, 康乐, 郑坤.“反电动势跟踪”法消除无刷直流电机转矩脉动［J］.沈阳工业大学学报, 2008, 30(5):504-508.
LIANG Zhonghua, KANG Le, ZHENG Kun. EMF tracking control strategy to eliminate torque ripple in BLDCM ［J］. Journal of Shenyang University of Technology, 2008, 30(5):504-508．
［10］ 范坚坚, 吴建华. 计及齿槽极间隔断Halbach型磁钢的PMSM气隙磁场解析分析［J］. 中国电机工程学报, 2010, 30(12): 98-105.
FAN Jianjian, WU Jianhua. Analytical solution and analysis of airgap magnetic field of PMSM with partitionbetweenpoles Halbach magnet considering effect of slotting ［J］. Proceedings of the CSEE, 2010, 30(12):98-105．
［11］ 安跃军,孙昌志.正弦极宽调制的永磁同步电动机.中国：CN2007101575970 ［P］. 2007-10-22．
AN Yuejun, SUN Changzhi. A type of pole width modulation method of PMSM.China:CN200720015431 ［P］, 2007-10-22．
［12］ 李帅,彭国平,鱼振民,等. Ansoft EM在电机设计中的应用［J］. 微电机, 2004, 37(04):52-54．
LI Shuai, PENG Guoping, YU Zhenmin, et al. The application of Ansoft EM in motor Design ［J］. Micromotors, 2004, 37(04):52-54．
［13］ HWANG S, EOM J, HWANG G, et al. Cogging torque and acoustic noise reduction in permanent magnet motors by teeth pairing ［J］. IEEE Transactions on Magnetics, 2000, 36 (5):3142-3146．
［14］ 安跃军,温宏亮,刘国明,等. 磁体阵列式永磁同步的电机磁场与起动性能［J］. 沈阳工业大学学报, 2011, 33(01):14-19．
AN Yuejun, WEN Hongliang, LIU Guoming, et al. Magnetic field and starting performance of magnet arrayed PMSM ［J］. Journal of Shenyang University of Technology, 2011, 33(01):14-19．
No related articles found!