Please wait a minute...
J4  2012, Vol. 46 Issue (9): 1619-1624    DOI: 10.3785/j.issn.1008-973X.2012.09.011
土木工程     
肋环型逐层双环索穹顶初始预应力快速计算法
宋智杰,卓新
浙江大学 建筑工程学院,浙江 杭州 310058
Fast calculation method for initial prestress of
rib-patterned cable dome with two hoops in each layer
SONG Zhi-jie, ZHUO Xin
College of Civil Engineering and Architecture, Zhejiang University, Hangzhou 310058, China
 全文: PDF  HTML
摘要:

通过将空间立体结构简化为平面桁架结构,并根据节点受力平衡关系与各索杆平面等效力的关系,分别推导了新型肋环型逐层双环索穹顶结构在不设和设有内拉环时的索杆初始预应力分布的计算公式.利用ANSYS软件建立非线性有限元模型对公式进行了验证,计算结果表明:新型结构快速计算法所得的结果与结构非线性模拟结果吻合良好.因没有考虑模型在施加初始预应力后产生的微小变形,仅在结构顶部索杆内力有微小偏差,说明无须借助结构分析软件进行繁琐的计算,仅利用快速计算法即可完成新型结构初始预应力的设计,且其计算精度满足结构设计的一般精度要求.

Abstract:

By simplifying a three-dimensional structure of space into a truss structure of plane, according to the relation of balanced forces of nodes and the relation of equivalent forces of each cable bar plane, the calculation methods for distribution of initial prestress of cable bars of the new rib-patterned cable dome with two hoops in each layer with and without inner hoops were deduced respectively. The formulas were validated by setting up a  nonlinear finite element model utilizing the software of ANSYS. The  calculation results show that the results of the fast calculation method for the new structure match well with those of the nonlinear simulation, except that the inner force of the cable bars at the top of the structure has slight deviation because the slight deformation of the model caused by applying initial prestress has not been considered. It means that it is unnecessary to carry out complicated calculation relying on the software of structural analysis, and it is sufficient to fulfill the design of initial prestress of the new structure by using the fast calculation method only, and its  calculation precision can meet the general  precision requirements on structural design.

出版日期: 2012-09-01
:  TU 560.3030  
基金资助:

国家自然科学基金资助项目(50678157).

作者简介: 卓新(1964-),男,副教授,从事空间结构的科研工作.E-mail:zhuoxin@zju.edu.cn
服务  
把本文推荐给朋友
加入引用管理器
E-mail Alert
RSS
作者相关文章  

引用本文:

宋智杰,卓新. 肋环型逐层双环索穹顶初始预应力快速计算法[J]. J4, 2012, 46(9): 1619-1624.

SONG Zhi-jie, ZHUO Xin. Fast calculation method for initial prestress of
rib-patterned cable dome with two hoops in each layer. J4, 2012, 46(9): 1619-1624.

链接本文:

http://www.zjujournals.com/eng/CN/10.3785/j.issn.1008-973X.2012.09.011        http://www.zjujournals.com/eng/CN/Y2012/V46/I9/1619

[1] FULLER R B. Tensileintegrity structures. US, 3063521[P], 1962-11-13.
[2] 詹伟东, 董石麟. 索穹顶结构体系的研究进展[J]. 浙江大学学报:工学版, 2004, 38(10): 1298-1307.
ZHAN Weidong, DONG Shilin. Advances in cable domes[J]. Journal of Zhejiang University:Engineering Science, 2004, 38(10): 1298-1307.
[3] 陈联盟, 董石麟, 袁行飞. 索穹顶结构施工成形理论分析[J]. 工程力学, 2008, 25(4): 134-139.
CHEN Lianmeng, DONG Shilin, YUAN Xingfei. Theoretical analysis of construction procedures of cabledomes[J]. Engineering Mechanics, 2008, 25(4): 134-139.
[4] 郭正兴, 罗斌, 杨杰,等. 刚性屋面索穹顶施工关键技术研究及工程应用[J]. 施工技术, 2010, 39(8): 69-72.
GUO Zhengxing, LUO Bin, YANG Jie, et al. Key construction technology of rigid roof cable dome and engineering application[J]. Construction Technology, 2010, 39(8): 69-72.
[5] 卓新, 王苗夫, 董石麟. 逐层双环肋环型索穹顶结构与施工成形方法. 中国, 2009101535309[P]. 授权通知日:2011-7-1.
[6] 杨帆. 葵花型逐层双环索穹顶力学性能研究及施工过程分析[D]. 杭州: 浙江大学, 2010: 94-95.
YANG Fan. Research on mechanical properties and construction process of sunflowertype cable dome with two loops in each layer[D]. Hangzhou: Zhejiang University, 2010: 94-95.
[7] 许国杰. 葵花型逐层双环索穹顶结构局部构件失效时力学性能研究[D]. 杭州: 浙江大学, 2011: 88-89.
XU Guojie. Mechanical properties of Levy cable dome with two hoops in each tier when local component failure[D]. Hangzhou: Zhejiang University, 2011: 88-89.
[8] PELLEGRINO S. Structural computation with the singular value decomposition of equilibrium matrix[J]. International Journal of Solids and Structures, 1993, 30(21): 3025-3035.
[9] 陈志华, 王小盾, 刘锡良. 张拉整体结构的力密度法找形分析[J]. 建筑结构学报, 1999, 20(5): 29-35.
CHEN Zhihua, WANG Xiaodun, LIU Xiliang. Form finding of tensegrity structures by force density method[J]. Journal of Building Structures, 1999 20(5): 29-35.
[10] 董智力, 何广乾, 林春哲. 张拉整体结构平衡状态的寻找[J]. 建筑结构学报, 1999 20(5): 24-28.
DONG Zhili, HE Guangqian, LIN Chunzhe. Finding of equilibrium states of tensegrity systems[J]. Journal of Building Structures, 1999,20(5): 24-28.
[11] 张莉, 张其林, 丁佩民. 悬索结构初始状态及放样状态的确定分析[J]. 同济大学学报;自然科学版, 2000, 28(1): 9-13.
ZHANG Li, ZHANG Qilin, DIN Peimin. Initial equilibrium and geometry zero state solution methods for cable structures[J]. Journal of Tongji University:Natural Science, 2000, 28(1): 9-13.
[12] 董石麟, 袁行飞. 肋环型索穹顶初始预应力分布的快速计算法[J]. 空间结构, 2003, 9(2): 3-19.
DONG Shilin, YUAN Xingfei. A quick calculation method for initial prestress distribution of Geiger domes[J]. Spatial Structures, 2003, 9(2): 3-19.
[13] 周家伟, 董石麟, 袁行飞. 具有外环桁架的肋环型索穹顶初始预应力分布快速计算法[J]. 沈阳建筑大学学报:自然科学版, 2009, 25(2): 217-223.
ZHOU Jiawei, DONG Shilin, YUAN Xingfei. Quick calculation method for initial prestress distribution of geiger domes with outer truss torus[J]. Journal of Shenyang Jianzhu University:Natural Science, 2009, 25(2): 217-223.
[14] 刘开国. 拉索穹顶结构在轴对称荷载作用下的计算[J]. 建筑结构学报, 1993, 14(5): 28-36.
LIU Kaiguo. Calculation of cable dome structure under axisymmetrical loading[J]. Journal of Building Structures, 1993, 14(5): 28-36.

[1] 肖南, 黄玉香, 董石麟, 等. 张力结构位移限制下的形状调整强度优化分析[J]. J4, 2010, 44(1): 166-173.
[2] 肖南, 肖新, 董石麟. 张力结构形状调整优化分析[J]. J4, 2009, 43(8): 1513-1519.