Please wait a minute...
J4  2012, Vol. 46 Issue (4): 616-621    DOI: 10.3785/j.issn.1008-973X.2012.04.007
能源与机械工程     
多孔质气悬浮气膜压力特性建模及试验研究
钟伟1, 刘昊1, 陶国良1, 黎鑫2, 香川利春2
1.浙江大学 流体传动及控制国家重点实验室,浙江 杭州 310027;
2.东京工业大学 精密工学研究所,日本 横浜 226-8503
Theoretical and experimental study on pressure characteristics of
air film for levitation using porous media
ZHONG Wei1, LIU Hao1, TAO Guo-liang1, LI Xin2, KAGAWA Toshiharu2
1. State Key Laboratory of Fluid Power Transmission and Control, Zhejiang University, Hangzhou 310027, China;
2. Precision and Intelligence Laboratory, Tokyo Institute of Technology, Yokohama 226-8503, Japan
 全文: PDF  HTML
摘要:

为了研究多孔质气悬浮气膜压力特性以便对玻璃基板的非接触式搬运系统进行性能分析和优化设计,以具有代表性的区域单元为对象,建立包含多孔质特性和间隙流特性的气膜压力动态模型,利用有限体积法(FVM)进行求解.当多孔质表面空气薄膜受到工件的往复振动挤压时,压力响应相对间隙距离呈现明显的滞环现象,表现出弹性特性和阻尼特性.仿真和试验的结果表明,基于动态模型的计算结果与实验值吻合较好.气膜压力刚度系数随着间隙距离的减小而迅速增大,并受到供给流量与区域半径的影响.气膜压力阻尼系数受供给流量的影响甚小,受区域半径的影响显著,表明适当增加导轨宽度可以有效地加快工件自由振荡衰减速度.

Abstract:

A pressure dynamic model including the characteristics of porous media and gap flow was established within a representative region in order to analyze the air film pressure characteristics of pneumatic levitation using porous media, as for performance analysis and optimal design of non-contact conveying system. The model was solved by using finite volume method (FVM). Results showed that there exists an obvious pressure hysteresis versus gap thickness when a work piece was vibrated back and forth to squeeze the air film, revealing that the pressure response was identified as a representation of spring-damping characteristic. Theoretical and experimental results showed that the dynamic model based calculated results accorded well with the experimental data. Pressure stiffness coefficient of the air film increased greatly as a gap thickness decreased, and varied with the supply flow rate as well as the region radius. Pressure damping coefficient little changed with the supply flow rate, but apparently affected by the region radius, indicating that the decay of free vibration of the work piece can be accelerated by appropriately increasing the width of the conveyor.

出版日期: 2012-05-17
:  TH 138  
基金资助:

国家自然科学基金资助项目(50805128); 浙江大学流体传动及控制国家重点实验室开放基金资助项目(GZKF-2008001).

通讯作者: 刘昊,男,副教授.     E-mail: hliu2000@zju.edu.cn
作者简介: 钟伟(1983—), 男, 博士生, 从事气动电子技术研究. E-mail: zhongwei@zju.edu.cn
服务  
把本文推荐给朋友
加入引用管理器
E-mail Alert
RSS
作者相关文章  

引用本文:

钟伟, 刘昊, 陶国良, 黎鑫, 香川利春. 多孔质气悬浮气膜压力特性建模及试验研究[J]. J4, 2012, 46(4): 616-621.

ZHONG Wei, LIU Hao, TAO Guo-liang, LI Xin, KAGAWA Toshiharu. Theoretical and experimental study on pressure characteristics of
air film for levitation using porous media. J4, 2012, 46(4): 616-621.

链接本文:

http://www.zjujournals.com/eng/CN/10.3785/j.issn.1008-973X.2012.04.007        http://www.zjujournals.com/eng/CN/Y2012/V46/I4/616

[1] VANDAELE V, LAMBERT P, DELCHAMBRE A. Noncontact handling in microassenbly: acoustical levitation [J]. Precision Engineering, 2005, 29(4): 491-505.
[2] LI Xin, KAWASHIMA K, KAGAWA T. Analysis of vortex levitation [J]. Experimental Thermal and Fluid Science, 2008, 32(8): 1448-1454.
[3] 王涛,杨玉贵,彭光正.半导体及平板显示制造业中的空气非接触搬运技术[J].液晶与显示,2009,24(3): 404-408.
WANG Tao, YANG Yugui, PENG Guangzheng. Application of noncontact airsuspended movement technology in semiconductor and FPD production industry [J]. Chinese Journal of Liquid Crystals and Displays, 2009, 24(3): 404-408.
[4] CHANDRA C J G, SRINIVAS Y L, SEETHARAMU K N, et al. Investigation of air film conveyor pressurised through multiple holes [J]. Finite Elements in Analysis and Design, 1990, 6(3): 235-243.
[5] BHAT N, BARRANS S M. Design and test of a Pareto optimal flat pad aerostatic bearing [J]. Tribology International, 2008, 41(3): 181-188.
[6] FAN K C, HO C C, MOU J I. Development of a multiplemicrohole aerostatic air bearing system [J]. Journal of Micromechanics and Microengineering, 2002, 12(5): 636-643.

[7] LEE H G, LEE D G. Design of a large LCD panel handling air conveyor with minimum air consumption [J]. Mechanism and Machine Theory, 2006, 41(7): 790-806.
[8] AMANO K, YOSHIMOTO S, MIYATAKE M, et al. Basic investigation of noncontact transportation system for large TFTLCD glass sheet used in CCD inspection section [J]. Precision Engineering, 2011, 35(1): 58-64.
[9] FOURKA M, BONIS M. Comparison between externally pressurized gas thrust bearings with different orifice and porous feeding systems [J]. Wear, 1997, 210(1/2): 311-317.
[10] ZHONG Wei, TAO Guoliang, LI Xin, et al. Analysis of levitation using porous media [C]∥ Proceedings of SICE Annual Conference. Taibei: IEEE, 2010: 1658-1663.
[11] ZHONG Wei, TAO Guoliang, LI Xin, et al. Determination of flow rate characteristics of porous media using charge method [J]. Flow Measurement and Instrumentation, 2011, 22(3): 201-207.
[12] SPARROW E M, BEAVERS G S, HWANG I T. Effect of velocity slip on porouswalled squeeze films [J]. ASME Journal of Lubrication Technology, 1972, 94(3): 260-265.
[13] LUONG T S, POTZE W, POST J B, et al. Numerical and experimental analysis of aerostatic thrust bearings with porous restrictors [J]. Tribology International, 2004, 37(10): 825-832.
[14] TAYLOR G I. A model for the boundary condition of a porous material. part 1 [J]. Journal of Fluid Mechanics, 1971, 49(2): 319-326.

[1] 朱晓, 陶国良, 刘昊, 孟德远, 班伟, 钱鹏飞. 气浮无摩擦气缸及气浮特性仿真[J]. J4, 2014, 48(2): 214-220.
[2] 路波, 陶国良, 刘昊, 等. 零重力模拟气动悬挂系统的建模及恒压控制[J]. J4, 2010, 44(2): 379-385.