Please wait a minute...
J4  2012, Vol. 46 Issue (3): 494-498    DOI: 10.3785/j.issn.1008-973X.2012.03.017
能源工程     
标定系统中多ECU分时下载研究
吕品1,吴锋1,张永光1,张翼2,钱啸君1
1.浙江大学 动力机械及车辆工程研究所,浙江 杭州 310027;
2.浙江大学 嵌入式工程中心,浙江 杭州 310027  
Timesharing downloading of multiECUs in calibration system
LV Pin1, WU Feng1, ZHANG Yong-guang1, ZHANG Yi2, QIAN Xiao-jun1
1. Power Machinery and Vehicular Engineering Institute, Zhejiang University, Hangzhou 310027, China;
2. Embedded System Engineering Center, Zhejiang University, Hangzhou 310027, China
 全文: PDF  HTML
摘要:

在标定系统中传统Bootloader技术的基础上,分析了相关的时间性能影响因素,针对分时下载中的时间效率问题,提出一种新型的多电子控制单元(ECU)分时下载模式.在符合通用标定协议(XCP)的基础上,扩展了部分命令,针对目标ECU进行分组编号、优先级设定等工作.在分时下载过程中,主机能够连续地发出编程命令,而不必耗费时间等待结果的返回,极大地提高了总线利用效率,从而节省了下载编程时间.通过实验验证,发现理论分析与实验结果十分吻合,该方法可以显著缩短下载编程时间,同时又不对ECU方向的反馈构成影响,完全可以满足实际发动机和车辆研发过程中ECU的设计与开发.

Abstract:

On the basis of  traditional techniques on bootloader in the calibration system, the time performance and relevant factors of downloading were analyzed. A new multiECUs downloading mode was designed to solve the problems of time efficiency during timesharing downloading process.  Based on the universal measurement and calibration protocol (XCP), parts of the commands were extended. By assigning indexes to target electronic control units(ECUs) and setting priorities, the efficiency of the communication bus is improved greatly and the time of downloading and programming is saved. During the downloading process, the master can continuously issue programming commands, without having to spend time waiting for the results returned, which greatly improving the bus utilization efficiency, thus saving the download programming time. Theoretical analysis and experimental results agree well. This method can significantly reduce the programming time, without causing interference with the feedback in the ECUs, so it fully meets the requirement in the development of the actual engine and vehicle research process.

出版日期: 2012-03-01
:  TK 417.4  
基金资助:

国家核高基重大科技专项资助项目(2009ZX01038-002)

通讯作者: 吴锋,男,教授     E-mail: wfice@zju.edu.cn
作者简介: 吕品(1988-),男,硕士生,主要研究方向为通用标定系统的设计与开发.E-mail: lvpin@zju.edu.cn
服务  
把本文推荐给朋友
加入引用管理器
E-mail Alert
RSS
作者相关文章  

引用本文:

吕品,吴锋,张永光,张翼,钱啸君. 标定系统中多ECU分时下载研究[J]. J4, 2012, 46(3): 494-498.

LV Pin, WU Feng, ZHANG Yong-guang, ZHANG Yi, QIAN Xiao-jun. Timesharing downloading of multiECUs in calibration system. J4, 2012, 46(3): 494-498.

链接本文:

http://www.zjujournals.com/eng/CN/10.3785/j.issn.1008-973X.2012.03.017        http://www.zjujournals.com/eng/CN/Y2012/V46/I3/494

[1] ROLFSMEIER A, RICHERT J, LEINFELLNER R. A new calibration system for ECU development [C]∥2003 SAE World Congress. Detroit: [s. n], 2003: 2003-01-0103.
[2] 苏渝, 周文华, 竺春狄. 一种是用不同通信方式基于XCP协议的ECU标定工具的开发 [J]. 汽车工程, 2010, 32(1): 81-82.
SU Yu, ZHOU Wenhua, ZHU Chundi. Development of a XCPbased ECU calibration tool suitable for different communication schemes [J]. Automotive Engineering, 2010, 32(1):81-82.
[3] 邹东升, 佘龙华. 一种基于CAN总线的程序调试技术研究 [J]. 计算机技术与应用, 2008, 26(5): 116-117.
ZOU Dongsheng, SHE Longhua. Research on the technology of multiDSP online debug [J]. Computer Technology and Its Applications, 2008, 26(5): 116-117.
[4] 刘矗, 罗峰. 基于飞思卡尔微控制器的CAN Bootloader的实现与应用 [J]. 苏州大学学报:工学版, 2010,30(2): 57-58.
LIU Zhu, LUO Feng. Implementation of CAN Bootloader based on Freescale MCU [J]. Journal of Suzhou University :Engineering Science Edition, 2010, 30(2): 57-58.
[5] 孙立宁, 穆春阳, 杜志江, 等. 电控柴油机ECU编程设备研究与开发 [J]. 内燃机工程, 2008, 29(1): 66-67.
SUN Lining, MU Chunyang, DU Zhijiang, et al. Research and development of ECU programming device for electroniccontrolled diesel Engine [J]. Chinese Internal Combustion Engine Engineering, 2008, 29(1): 66-67.
[6] The universal measurement and calibration protocol family V10[S]. Germany: Association for Standardisation of Automation and Measuring Systems, Org, 2003.
[7] 汤莎莎, 肖铁军, 孔峰, 等. 基于CAN总线的电控发动机标定系统 [J]. 计算机测量与控制, 2007, 15(11): 1519-1520.
TANG Shasha, XIAO Tiejun, KONG Feng, et al. CAN bus based calibration system for electronically controlled engine [J]. Computer Measurement & Control, 2007, 15(11): 1519-1520.

[1] 张永光,吴锋,方正,姚栋伟,罗端. 发动机HILS系统中曲轴转速与凸轮相位信号模拟[J]. J4, 2011, 45(7): 1221-1226.