Please wait a minute...
J4  2012, Vol. 46 Issue (3): 489-493    DOI: 10.3785/j.issn.1008-973X.2012.03.016
能源工程     
发动机机体疲劳裂纹诊断的时序方法
刘震涛1,张鹏伟1,2,俞小莉1,李建锋2,陈占善2
1. 浙江大学 能源工程学系,浙江 杭州 310027; 2. 潍柴动力股份有限公司,山东 潍坊 261001
Fatigue crack diagnosis of engine-block by time series analysis
LIU Zhen-tao1, ZHANG Peng-wei1,2, YU Xiao-li1, LI Jian-feng2, CHEN Zhan-shan2
1. Department of Energy Engineering, Zhejiang University, Hangzhou 310027, China;
2. Weichai Power Co. Ltd., Weifang 261001,China
 全文: PDF  HTML
摘要:

针对灰铸铁材料发动机机体疲劳试验中裂纹的出现表现为瞬间突发性,以及疲劳裂纹的出现不易识别的问题,采用实测应变信号作为系统的输出响应研究机体疲劳裂纹的诊断方法,对机体疲劳试验过程中曲轴箱底部应变信号进行了实时记录,并且采用经典时序方法对所测应变信号进行建模,计算各个时间段时序模型的欧几里得(Euclid)距离、马氏(Mahalanobis)距离及模型残差的方差.分析结果表明:疲劳裂纹出现瞬间,应变时域信号幅值表现为不易察觉的微小变化,但是时序模型残差的方差却出现瞬间突变,因此,残差的方差对裂纹出现瞬间具有敏感特性.

Abstract:

The crack of engine-block made of cast iron often occurs suddenly in engine-block fatigue test, and the crack is not easy to be diagnosed. In order to overcome the above difficulties,the strain which is the response of output in the engine-block fatigue test was used to diagnose the occurrence of fatigue crack. The strain gauge was sticked on the bottom of crankcase to acquire the real-time strain signals,and the signals were modeled by time series analysis. Euclid distance, Mahalanobis distance and the variance of residual were calculated respectively to find the symptom of fatigue crack in the engineblock fatigue test. The result shows that the amplitude of strain has subtle difference between undamaged block and damaged block in time field, but the variance of residual has the instantaneous mutation at the same time, so it can be used to diagnose the fatigue crack occurrence.

出版日期: 2012-03-01
:  TK 427  
通讯作者: 俞小莉,女,教授.     E-mail: yuxl@zju.edu.cn
作者简介: 刘震涛(1971-),男,副教授,主要从事内燃机结构可靠性研究.E-mail: liuzt@zju.edu.cn
服务  
把本文推荐给朋友
加入引用管理器
E-mail Alert
RSS
作者相关文章  

引用本文:

刘震涛,张鹏伟,俞小莉,李建锋,陈占善. 发动机机体疲劳裂纹诊断的时序方法[J]. J4, 2012, 46(3): 489-493.

LIU Zhen-tao, ZHANG Peng-wei, YU Xiao-li, LI Jian-feng, CHEN Zhan-shan. Fatigue crack diagnosis of engine-block by time series analysis. J4, 2012, 46(3): 489-493.

链接本文:

http://www.zjujournals.com/eng/CN/10.3785/j.issn.1008-973X.2012.03.016        http://www.zjujournals.com/eng/CN/Y2012/V46/I3/489

[1] 羊拯民, 张成宝. 时序分析在汽车变速箱齿轮故障诊断中的应用[J]. 农业机械学报,2000, 31(3): 92-95.
YANG Zhengmin, ZHANG Chengbao. Application of time series analysis in fault diagnosis of auto gearbox [J]. Transactions of the Chinese Society for Agricultural, 2000, 31(3): 92-95.
[2] 陈素维. 时间序列在建筑结构振动分析中的应用[J]. 西安工程科技学院学报,2003, 17(2): 179-181.
CHEN Suwei. Application of time series in building structures vibration analysis [J]. Journal of Xi’an University of Engineering Science and Technology, 2003, 17(2): 179-181.
[3] 方泽南, 傅尚新, 张勇. 时间序列在故障诊断中的应用[J]. 清华大学学报:自然科学版, 1998, 38(9): 123-126.
FANG Zenan, FU Shangxin, ZHANG Yong. Fault diagnosis based on time series [J]. Journal of Tsinghua University :Sci & Tech, 1998, 38(9): 123-126.
[4] THANAGASUNDRAM S, SPURGEON S, SCHLINDWEIN F S. A fault detection tool using analysis from an autoregressive model pole trajectory [J]. Journal of Sound and Vibration,2008, 317(3/4/5): 975-993.
[5] WANG W Y, WONG A K. Autoregressive modelbased gear fault diagnosis [J]. Journal of Vibration and Acoustics, 2002, 124(2): 172-179.
[6] 周迅, 俞小莉. 曲轴疲劳裂纹扩展模式的时序方法预测[J]. 农业机械学报, 2007, 38(9): 163-167.
ZHOU Xun, YU Xiaoli. Prediction of crankshaft fatigue crack growth pattern by time series analysis [J]. Transactions of the Chinese Society for Agricultural, 2007, 38(9): 163-167.
[7] 陈学罡,李慧远,田雨苗. 发动机气缸体疲劳试验研究[J]. 汽车工艺与材料,2006(3): 6-9.
CHEN Xuegang, LI Huiyuan, TIAN Yumiao. Research on fatigue test of engine cylinder block [J]. Automobile Technology & Material, 2006(3): 6-9.
[8] 杨叔子, 吴雅, 轩建平. 时间序列分析的工程应用(上、下)[M].武汉: 华中科技大学出版社, 2007:8-20.
[9] 王济, 胡晓. MATLAB在振动信号处理总的应用[M]. 北京: 中国水利水电出版社, 2006: 69-82.

[1] 苏瑜, 周文华, 竺春狄. 电控柴油机ECU通用性标定平台的研究与开发[J]. J4, 2010, 44(8): 1530-1534.