Please wait a minute...
浙江大学学报(工学版)
J4  2012, Vol. 46 Issue (2): 315-320    DOI: 10.3785/j.issn.1008-973X.2012.02.021
机械工程、能源工程     
风机叶片设计二次开发与气动性能仿真
倪益华, 宋芳芳, 过海
浙江大学 机械工程学系,浙江 杭州 310027
Customized development for wind turbine blade design and
aerodynamic performance simulation
NI Yi-hua, SONG Fang-fang, GUO Hai
Department of Mechanical Engineering, Zhejiang University, Hangzhou, 310027, China
 全文: PDF  HTML
摘要：

为了提高叶片设计的精度和效率,根据风机叶片设计的相关理论和方法,对叶片气动外形设计进行研究.以20 kW风机叶片为例,在Wilson法的基础上,利用VB、VC++等编程语言在SolidWorks平台上开发叶片气动外形设计及建模的应用系统.根据输入的设计参数自动生成叶片的三维实体模型,省去了以往设计过程中生成的大量数据的转换和存储,实现叶片的高效,智能化设计.为了对设计结果进行评估,同时验证设计的有效性,针对设计好的叶片模型进行流场仿真分析.结果表明,提出的叶片设计与建模方法能够有效提高风能利用率,缩短风机叶片设计周期,可用于企业对叶片的设计研发,并为叶片结构有限元分析和优化设计平台奠定基础.
Abstract:

In order to improve the efficiency and precision, this study presented a blade aerodynamic contour design referring to wind turbine blade design theory and method. Taking 20 kW wind turbine blade as an example, a blade optimization program was developed on the platform of SolidWorks based on Wilson method. The 3D solid model was able to be generated automatically according to the input parameters. This method realized efficient and intelligent design for the wind turbine blade  which omitted the transformation and storage of the mass data produced in the previous design process. Then, the flow-field simulation analysis was carried on the blade to calculate the aerodynamic performance of the blade. The results showed that this method was able to effectively increase the utilization rate of wind power and shorten the design period.  Such a developed technology can be widely used for blade design and development by wind power enterprises.
出版日期: 2012-03-20
:  TK 83  
基金资助:

浙江省桐乡市科技局重点资助项目(201001003).
作者简介: 倪益华(1969—)，男，副教授，主要从事机械制造及其自动化研究. E-mail: nyh9904@163.com.
服务　　
把本文推荐给朋友
加入引用管理器
E-mail Alert
RSS
作者相关文章　　

引用本文:

倪益华, 宋芳芳, 过海. 风机叶片设计二次开发与气动性能仿真[J]. J4, 2012, 46(2): 315-320.

NI Yi-hua, SONG Fang-fang, GUO Hai. Customized development for wind turbine blade design and
aerodynamic performance simulation. J4, 2012, 46(2): 315-320.

链接本文:

http://www.zjujournals.com/eng/CN/10.3785/j.issn.1008-973X.2012.02.021    或    http://www.zjujournals.com/eng/CN/Y2012/V46/I2/315

［1］ VAZ J R P, PINHO J T, MESQUITA A L A. An extension of BEM method applied to horizontalaxis wind turbine design ［J］. Renewable Energy, 2011, 36(6): 1734-1740.
［2］ GUO T T, WU D W, XU J H, et al. The method of largescale wind turbine blades design based on MATLAB programming ［C］∥ Proceedings of the 1st International Conference on Sustainable Power Generation and Supply. United States: IEEE Computer Society, 2009: 1-5.
［3］ 杨从新,巫发明,张玉良.风力机风轮叶片气动设计程序开发［J］.西华大学学报：自然科学版,2008,27（4）: 38-41.
YANG Congxin, WU Faming, ZHANG Yuliang. Study on the design of wind turbines based on visual basic ［J］. Journal of Xihua University: Natural Science, 2008, 27(4): 38-24.
［4］ 包飞.风力机叶片几何设计与空气动力学仿真［D］.大连：大连理工大学,2008: 15-18.
BAO Fei. Geometric design and aerodynamic simulation for the wind turbine blades ［D］. Dalian: Dalian University of Technology, 2008: 15-18.
［5］ SHEN W Z, MIKKELSE R, SORENSEN J N. Tip loss corrections for wind turbine computations ［J］. Wind Energy, 2005, 8(4): 457-475.
［6］ 韩璐.水平轴风力机叶片设计及气动性能试验研究［D］.南京：南京航空航天大学,2008: 30-35.
HAN Lu. Horizontal axial wind turbine blade design and aerodynamic performance experiment ［D］. Nanjing: Nanjing University of Aeronautics and Astronautics, 2008: 30-35.
［7］ 江洪,李仲兴,刑启恩.SolidWorks 2003二次开发基础与实例教程［M］.北京：电子工业出版社,2003: 36-52.
No related articles found!