机械工程、能源工程 |
|
|
|
|
湿式多片换档离合器带排转矩的预测模型 |
张志刚1, 周晓军1, 李永军2, 沈路1, 杨富春1 |
1.浙江大学 现代制造工程研究所,浙江 杭州 310027;2.中国北方车辆研究所
车辆传动国家重点实验室,北京 100072 |
|
Drag torque prediction model of wet multi-disk shifting clutch |
ZHANG Zhi-gang1, ZHOU Xiao-jun1, LI Yong-jun2, SHEN Lu1, YANG Fu-chun1 |
1. Institute of Modern Manufacturing Engineering, Zhejiang University, Hangzhou 310027, China; 2. National Key
Laboratory of Vehicle Transmission, China North Vehicle Research Institute, Beijing 100072, China |
引用本文:
张志刚, 周晓军, 李永军, 沈路, 杨富春. 湿式多片换档离合器带排转矩的预测模型[J]. J4, 2011, 45(4): 708-713.
ZHANG Zhi-gang, ZHOU Xiao-jun, LI Yong-jun, SHEN Lu, YANG Fu-chun. Drag torque prediction model of wet multi-disk shifting clutch. J4, 2011, 45(4): 708-713.
链接本文:
http://www.zjujournals.com/eng/CN/10.3785/j.issn.1008-973X.2011.04.020
或
http://www.zjujournals.com/eng/CN/Y2011/V45/I4/708
|
[1] 贾云海,张文明.湿式摩擦离合器摩擦片表面温升和油槽结构研究[J].中国公路学报,2007,20(5): 112-116.
JIA Yunhai, ZHANG Wenming. Research on friction disk surface oil groove configuration and temperature raise in wet friction clutch [J]. China Journal of Highway and Transport, 2007, 20(5): 112-116.
[2] YUAN Y Q, EYSION A L, JAMES H. An improved hydrodynamic model for open wet transmission clutches [J]. Journal of Fluids Engineering, 2007, 27(3): 333-337.
[3] FREDERICK A L. Parameters contributing to power loss in disengaged wet clutches [J]. SAE Transactions, 1974, 83(9): 1026-1032.
[4] ROBERT L F. Using the SAE#2 machine to evaluate wet clutch drag losses [J]. SAE Transactions, 1991, 100(2): 518-525.
[5] HISANAO K, CHEN Y L, HENRY H. Analysis of the various factors affecting drag torque in multiple plate wet clutches [J]. SAE Transactions, 2003, 112(5):1840-1845.
[6] KATO Y, MURASUGI T, HIRAKI H, et al. Fuel economy improvement through tribological analysis of the wet clutches and brakes of an automatic transmission [J]. JSAE Transactions, 1993, 58(10): 196-201.
[7] APHALE C R, CHO J, SCHULTZ W W, et al. Modeling and parametric study of torque in open clutch plates [J]. Journal of Tribology, 2006, 128(4): 422-430.
[8] YUAN Y Q, ATTIBELE P, DONG Y. CFD simulation of the flows within disengaged wet clutches of an automatic transmission [J]. SAE Transactions, 2003, 56(3): 1760-1768.
[9] 马彪,杨文正,周凯.液压换档离合器带排转矩研究[J].机械设计,1999,17(10):13-15.
MA Biao, YANG Wenzheng, ZHOU Kai. A study on drag torque of hydraulic shift clutch [J]. Machine Design, 1999, 17(10): 13-15.
[10] 阎清东,李宏才.湿式多片制动器带排转矩研究[J].机械,2001,28(6): 73-75.
YAN Qingdong, LI Hongcai. Study on drag torque of wet multidisc brake [J]. Machinery, 2001, 28(6): 73-75.
[11] 刘建胜,陈东升,李宏才.湿式多片式制动器带排转矩和响应特性的试验研究[J].车辆与传动技术,2003, 22(4): 8-11.
LIU Jiansheng, CHEN Dongsheng, LI Hongcai. Experiment research on drag torque and response characteristic of wet multidisc brake [J]. Vehicle and Power Technology, 2003, 22(4): 8-11.
[12] HU J B, PENG Z X, YUAN S H. Drag torque prediction model for the wet clutches [J]. Chinese Journal of Mechanical Engineering, 2009, 22(2): 238-243.
[13] 常近时.环形油垫静压推力轴承考虑油流惯性的承载能力计算公式[J].机械工程学报,1982,18(1): 62-68.
CHANG Jinshi. A calculation formula for carrying capacity of annular hydrostatic stepbearing taking account of oilflow inertia [J]. Journal of Mechanical Engineering, 1982, 18(1): 62-68. |
|
Viewed |
|
|
|
Full text
|
|
|
|
|
Abstract
|
|
|
|
|
Cited |
|
|
|
|
|
Shared |
|
|
|
|
|
Discussed |
|
|
|
|