印染生产过程的仿真和优化

doi:10.3785/j.issn.1008-973X.2010.07.026

2010, Vol. 44

Issue (7): 1377-1381 DOI: 10.3785/j.issn.1008-973X.2010.07.026

自动化技术

印染生产过程的仿真和优化

周晓慧1,2, 陈纯1, 谢作豪2

1. 浙江大学计算机科学与技术学院,浙江杭州 310027；2. 杭州电子科技大学信息与控制研究所,浙江杭州 310018

Simulation and optimization of printing and dyeing production
process

ZHOU Xiao-hui1,2, CHUN Chun1, XIE Zuo-hao2

1.School of Computer Science and Engineering, Zhejiang University, Hangzhou 310027, China;
2. Institute of Information and Control, Hangzhou Dianzi University, Hangzhou 310018, China

全文: PDF HTML

摘要：

针对印染生产过程中生产设备之间切换成本、生产设备负荷平衡的问题,分析生产过程中的瓶颈设备来优化瓶颈设备使用、提高利用率,研究订单式印染生产过程.采用分层赋时着色Petri网(HTCPN)技术建立生产过程的模型,并将该模型转化成Witness仿真模型.分析模型的运行状态与结果,对模型进行优化,分析生产过程设备的瓶颈.仿真结果验证了HTCPN模型的可操作性与有效性,从而为企业制定合理的车间生产计划提供理论依据,提高了生产设备和装置运行效率,缩短了生产周期.

Abstract:

The switching costs between equipments, the load balance of equipments and the bottleneck of equipments exist in the printing and dyeing production process. The bottleneck equipments were analyzed to optimize the utilization of bottleneck equipments and improve the utilizing performance, and the orderdriven production process was researched. A model for the process was conducted with the hierarchical timed colored Petri net (HTCPN), and the model was transformed into the Witness simulation model. After analyzing the running state and results of the simulation model, the model was optimized and the bottleneck equipments were found. Simulation results verified the workableness and effectiveness of HTCPN model, which provided a theoretic principle for enterprises to make the workshop production schedule, promoted the running performance of equipments and shortened the production period.

出版日期: 2010-07-01

TP 399

基金资助:

国家“973”重点基础研究发展规划项目（2009CB320600）；浙江省科技厅攻关项目（2008C11010）.

作者简介: 周晓慧（1963—）,男,浙江永嘉人,教授,从事计算机应用及控制的研究.E-mail: zhouxh@hdu.edu.cn

	服务
	把本文推荐给朋友
	加入引用管理器
	E-mail Alert
	RSS
	作者相关文章

引用本文:

周晓慧, 陈纯, 谢作豪. 印染生产过程的仿真和优化[J]. J4, 2010, 44(7): 1377-1381.

ZHOU Xiao-Hui, CHEN Chun, XIE Zuo-Hao. Simulation and optimization of printing and dyeing production
process. J4, 2010, 44(7): 1377-1381.

链接本文:

http://www.zjujournals.com/eng/CN/10.3785/j.issn.1008-973X.2010.07.026 或 http://www.zjujournals.com/eng/CN/Y2010/V44/I7/1377

［1］ CHE A L, TAKAHRIO J, GE Xiurun. Study on dynamic response of embedded long span corrugated steel culverts using scaled model shaking table tests and numerical analysis ［J］. Journal of Zhejiang University: Science A, 2006, 7(3)：18621775.
［2］ MURATA T. Petri nets: properties, analysis and applications ［J］. Proceedings of the IEEE, 1989, 77(4): 541580.
［3］ XUE F, ZHENG D Z. Diagnosability for discrete event systems based on Petri net language ［C］∥2004 8th International Conference on Control, Automation, Robotics and Vision. Kunming, China: ［s. n.］, 2004: 2111 2116.
［4］ LI Z W, ZHOU M C. Elementary siphons of Petri nets and their application to deadlock prevention in flexible manufacturing systems ［J］. IEEE Transactions on Systems, Man and Cybernetics, 2004, 34(1): 3851.
［5］ VALASEK M. Software tools for mechatronic vehicles: design through modeling and simulation ［J］. Vehicle System Dynamics Supplement, 1999, 33(7): 214230.
［6］ WILLIAM L R, DAVID M L. FACTOR/AIM: a manufacturing simulation system ［J］. Simulation, 1994, 15(6): 367372.
［7］ ZHANG Y Y, YAN G F. Synthesis of Petri net supervisors enforcing general constraints ［J］. Journal of Zhejiang University: Science A, 2006, 7(4): 18621775.
［8］ MA B, GUO Z Y, ZHOU H M. Development of a plastic injection molding training system using Petri nets and virtual reality ［J］. Journal of Zhejiang University: Science A, 2006, 7(3): 18621775.
［9］ YUE Y, ZHANG C M, WANG Haixin, et al. Stochastic individual predicate/transition nets ［J］. Journal of Zhejiang University: Science A,2009,10(2)：18621775.
［10］ LIANG K M, GUO H Y, PAN Shiwei. A study on naphtha catalytic reforming reactor simulation and analysis ［J］. Journal of Zhejiang University: Science B, 2005,6(6）：18621783.

[1]	诸利君, 陈芨熙, 王子龙, 暴志刚, 顾新建, 乐承毅. 面向全生命周期的合同能源管理支持系统[J]. J4, 2014, 48(2): 190-199.
[2]	李懿,罗建勋,陈卫东,郑筱祥. 基于蒙皮骨骼的虚拟手交互碰撞模拟方法[J]. J4, 2014, 48(1): 105-112.
[3]	李懿, 陆光明, 金帅, 罗建勋, 陈卫东, 郑筱祥. 手部精细运动获取缺损数据修复方法[J]. J4, 2013, 47(6): 925-933.

Viewed

Full text

Abstract

Cited

Shared

Discussed