Please wait a minute...
浙江大学学报(工学版)
J4  2010, Vol. 44 Issue (6): 1160-1163    DOI: 10.3785/j.issn.1008-973X.2010.06.020
化学工程     
轴流风速下旋流喷嘴的外流场实验研究
刘锦涛1, 王乐勤1, 程俊2, 焦磊1
1. 浙江大学 化学工程与生物工程学系,浙江 杭州 310027;2. 杭州大路实业有限公司,浙江 杭州 311234
Experimental study of swirl nozzle’s outer field with axial wind
LIU Jin-tao1, WANG Le-qin1, CHENG Jun2, JIAO Lei1
1. Department of Chemical Engineering and Biological Engineering, Zhejiang University, Hangzhou 310027,China; 2. Hangzhou Datu Industry Co., Ltd., Hangzhou 311234, China
 全文: PDF  HTML
摘要：

为解决烯烃厂急冷器结焦问题,建立旋流喷嘴实验模型,采用高速摄像系统跟踪记录喷雾场的形成过程以及测量雾滴的大小,并利用激光多普勒测试系统对喷嘴的外流场速度分布进行测量.实验结果表明：当喷嘴出口压力大于0.7 MPa时,雾滴粒径变小的趋势加快,雾化效果发生明显转变,油浆经汽化产生的裂解气越多,从而提高裂解气的产量；当轴向风速大于10 m/s时,喷雾场轴向速度增加显著并且趋于均匀化,油浆经过喷嘴后形成的雾滴在急冷器内停留的时间相对降低,减少了结焦发生的可能性.
Abstract:

In order to solve the coking problem of cooler in alkene plant, a swirl nozzle’s experiment model was designed. Highspeed camera was used to record the forming process of spray field and test the size of fogdrops. Laser Doppler Velocimeter (LDV) was used to test the velocity distribution of outer field. The experimental results show that, when the nozzle outlet pressure is higher than 0.7 MPa, the trend that the droplet size getting smaller is speeding up and the effect of atomization changes significantly, more pyrolysis gas produced by the vaporization of oil slurry will be gained, thereby enhancing the pyrolysis gas production ; when the axial wind is faster than 10 m/s, the axial velocity of spray field tends to increase significantly and homogenization, the droplet formed after the oil slurry through the nozzle stays relatively shorter inside of cooler, so it reduces the possibility of coke’s occurrence.
出版日期: 2010-07-16
:  TQ 051.7  
通讯作者: 焦磊,男,副教授.     E-mail: hj_wlq4@zju.edu.cn
作者简介: 刘锦涛（1986—）男,山东日照人,硕士生,主要从事流体机械理论研究及结构优化设计. E-mail:liujintao86@hotmail.com
服务　　
把本文推荐给朋友
加入引用管理器
E-mail Alert
RSS
作者相关文章　　

引用本文:

刘锦涛, 王乐勤, 程俊, 焦磊. 轴流风速下旋流喷嘴的外流场实验研究[J]. J4, 2010, 44(6): 1160-1163.

LIU Jin-Chao, WANG Le-Qi, CHENG Dun, JIAO Lei. Experimental study of swirl nozzle’s outer field with axial wind. J4, 2010, 44(6): 1160-1163.

链接本文:

http://www.zjujournals.com/eng/CN/10.3785/j.issn.1008-973X.2010.06.020    或    http://www.zjujournals.com/eng/CN/Y2010/V44/I6/1160

［1］ WANG P, YU S C M. Particle velocities, sizes and flux distribution in plasma spray with two powder injection ports ［J］.Materials Science and Engineering, 2004,383(2): 122136.

［2］ ZIMMERMANN S. A particle image shape imaging investigation of particles in a plasma jet［J］. Materials Science and Engineering, 2004,383(2): 153157.

［3］ LIU Haifeng. Prediction of droplet size distribution in sprays of prefilming airblast atomizers［J］. Chemical Engineering Science， 2006,61(6): 17411747.

［4］ 周山明,金保升.喷淋脱硫塔喷嘴外流动数值模拟与实验研究［J］.热能动力工程,2007,22(6): 673676.

ZHOU Shanming, JIN Baosheng. Numerical simulation and experimental research about the spray nozzle’s outside flow of thionizer［J］. Engineering for Thermal Energy and Power, 2007,22(6): 673676.

［5］ 王晓琦.中空压力喷嘴内流场特性研究［J］.流体机械,2008,36(3): 510.

WANG Xiaoqi. Research on the inner flow field of a hollow cone pressure swirl nozzle［J］. Fluid Machinery,2008,36(3): 510.

［6］ 侯凌云,侯晓春.喷嘴技术手册［M］.北京:中国石化出版社,2007: 6881.

 
No related articles found!