Please wait a minute...
J4  2010, Vol. 44 Issue (5): 942-949    DOI: 10.3785/j.issn.1008-973X.2010.05.018
土木与建筑工程     
双层球面网壳振动主动控制作动器位置优化
肖南, 容里, 董石麟
浙江大学 建筑工程学院, 浙江 杭州 310058
Optimal placements of  actuators in vibration active control for
doublelayer spherical grid shell structures
XIAO Nan, RONG Li, DONG Shi-lin
College of Civil Engineering and Architecture, Zhejiang University, Hangzhou 310058, China
 全文: PDF  HTML
摘要:

为了确定双层球面网壳结构振动控制的作动器最佳布设位置/数目,以主动控制的二次型性能泛函最优控制理论为基础,定义作动器布设的敏感度,提出逐步删除结构中敏感度小的作动器优化过程,并编制相应的作动器优化实现程序.算例表明,对于双层球面网壳结构,作动器布设在上、下弦杆优于腹杆,且布设在上弦优于下弦;在结构位移和作动器的控制力均满足设定的要求下,结构上弦作动器布置距离中心越远其灵敏度越大,环向布置优于径向布置,作动器最佳布设位置在结构上弦的最外圈环向杆件上.算例进一步表明,对于不同的地震动输入,作动器在最佳位置上,相应的主动控制的效果均比较明显.

Abstract:

The sensitivity of actuator disposed in the members was defined based on the optimization theory of active control with quadratic performance function in order to ascertain the optimal placements and numbers of actuators in the active control for doublelayer spherical grid shell structures. An optimization process to successively delete the insensitive actuators was presented. Meanwhile, a Matlab program was developed. The numerical results for doublelayer spherical grid shell structure show that it is better to lay out the actuators in chords than in diagonal members, as well as in upper chords better than in lower chords. Under satisfying the requirements of restricted structural displacements and control forces of actuators, the farther from structural center the actuators are laid out in upper chords, the more sensitive they’ll be, and it is better to lay out the actuators circularly than radially. The optimal placements of actuators are in the outermost ring of upper chords for doublelayer spherical grid shell structures. Results also show that the effectiveness of active control is apparent under different seismic inputs while the actuators are laid out in the optimal placements.

出版日期: 2012-03-19
:     
基金资助:

 国家自然科学基金资助项目(50638050,50978228)

作者简介: 肖南(1965—),男,江西南康人,副教授,从事大跨度空间结构的研究.E-mail:sholran@zju.edu.cn
服务  
把本文推荐给朋友
加入引用管理器
E-mail Alert
RSS
作者相关文章  

引用本文:

肖南, 容里, 董石麟. 双层球面网壳振动主动控制作动器位置优化[J]. J4, 2010, 44(5): 942-949.

XIAO Na, RONG Li, DONG Dan-Lin. Optimal placements of  actuators in vibration active control for
doublelayer spherical grid shell structures. J4, 2010, 44(5): 942-949.

链接本文:

http://www.zjujournals.com/eng/CN/10.3785/j.issn.1008-973X.2010.05.018        http://www.zjujournals.com/eng/CN/Y2010/V44/I5/942

[1] 任建亭,闫云集,姜节胜.振动控制传感器/作动器的数目和位置优化设计[J].振动工程学报,2001,14(2): 237241.
REN Jianting, YAN Yunji, JIANG Jiesheng. Optimal design method for sensors/actuators placement and numbers in the vibration control of flexible structure system[J]. Journal of Vibration Engineering, 2001, 14(2): 237241.
[2] 刘福强,张令弥.作动器/传感器优化配置的研究进展[J].力学进展,2000,30(4): 506516.
LIU Fuqiang, ZHANG Lingmi. Advance in optimal placement of actuator and sensors[J]. Advances in Mechanics, 2000, 30 (4): 506516.
[3] 孙万泉,李庆斌.随机荷载作用下结构的主动控制的作动器优化配置[J].工程力学,2007, 24(3): 115119.
SUN Wanquan, LI Qingbin. Optimal placement of actuators for structure initiative control under stochastic load[J].Engineering Mechanics, 2007, 24(3): 115119.
[4] 林雪松,周婧,林德新.MATLAB7.0应用集锦[M].北京:机械工业出版社,2006: 317335.
[5] 楼顺天,姚若玉,沈俊霞.MATLAB7.x程序设计[M].2版.西安:西安电子科技大学出版社,2006: 203228.
[6] 李东旭.大型挠性结构分散化振动控制:理论与方法[M].长沙:国防科技大学出版社,2002: 130141.
[7] 欧进萍.结构振动控制:主动、半主动和智能控制[M].北京:科学出版社,2003: 6168.
[8] 易大义,蒋书豪,李有法.数值方法[M].杭州:浙江科学技术出版社,1987: 350360.
[9] XU K, WARNITCHAI P, IGUSA T. Optimal placement and gains of sensors and actuators for feedback control[J]. Journal of Guidance Control and Dynamics, 1994, 17(5): 929934.
[10] 沈聚敏,周锡元,高小旺,等.抗震工程学[M].北京:中国建筑工业出版社,2000: 143158.

[1] 宁志华,何乐年,胡志成. 一种高压高可靠性开关电源控制芯片[J]. J4, 2014, 48(3): 377-383.
[2] 陈钊,余锋,陈婷婷. 基于日志结构的闪存均衡回收策略[J]. J4, 2014, 48(1): 92-99.
[3] 李林,陈家旺,顾临怡,王峰. 轴向柱塞泵/马达变量阀配流机构[J]. J4, 2014, 48(1): 29-34.
[4] 蒋湛,姚晓明,林兰芬. 基于特征自适应的本体映射方法[J]. J4, 2014, 48(1): 76-84.
[5] 陈迪仕 ,张宇,李平. 微小型无人直升机地面效应建模[J]. J4, 2014, 48(1): 154-160.
[6] 霍新新,褚金奎,韩冰峰,姚斐.  基于多个压电换能器的接口电路[J]. J4, 2013, 47(11): 2038-2045.
[7] 杨鑫,许端清,杨冰. 基于不规则性的并行计算方法[J]. J4, 2013, 47(11): 2057-2064.
[8] 王玉强,张宽地,陈晓东. 胶黏钢-混凝土组合梁的界面行为数值分析[J]. J4, 2013, 47(9): 1593-1598.
[9] 崔何亮, 张丹, 施斌.  布里渊分布式传感的空间分辨率及标定方法[J]. J4, 2013, 47(7): 1232-1237.
[10] 彭勇,徐小剑. 集料分布对沥青混合料劈裂强度影响数值分析[J]. J4, 2013, 47(7): 1186-1191.
[11] 伍晓榕,裘乐淼,张树有,孙良峰,郭传龙. 模糊语境下的复杂系统关联FMEA方法[J]. J4, 2013, 47(5): 782-789.
[12] 金波,陈诚,李伟. 具有半球形足端的六足机器人步态修正算法[J]. J4, 2013, 47(5): 768-774.
[13] 钟世英, 吴晓君, 蔡武军, 凌道盛, 蒋祝金, 王顺玉. 月面软着陆足垫水平拖曳模型试验装置研制[J]. J4, 2013, 47(3): 465-471.
[14] 袁幸,朱永生,张优云,洪军,祁文昌. 基于正反问题的滚动轴承损伤程度评估[J]. J4, 2012, 46(11): 1960-1967.
[15] 杨飞,朱株,龚小谨,刘济林. 基于三维激光雷达的动态障碍实时检测与跟踪[J]. J4, 2012, 46(9): 1565-1571.