Please wait a minute...
浙江大学学报(工学版)
J4  2009, Vol. 43 Issue (10): 1818-1822    DOI: 10.3785/j.issn.1008-973X.2009.10.013
工业工程与制造业信息化     
基于事物特性表的公差模型变型设计
纪杨建,虞再道,祁国宁
（浙江大学 现代制造工程研究所,浙江省先进制造技术重点研究实验室,浙江 杭州 310027）
Variant design of tolerance model based on tabular layouts of article characteristics
JI Yang-jian,YU Zai-dao,QI Guo-ning
（Institute of Manufacturing Engineering, Zhejiang Province Key Laboratory of Advanced Manufacturing Technology, Zhejiang University, Hangzhou 310027,China）
 全文: PDF(1370 KB)   HTML
摘要：

现有的变型设计结果通常是不带有公差信息的几何模型,因此很难与工艺模型、制造模型、测量模型等无缝集成.结合变型设计的特点,对公差信息做了面向变型设计的分析,将公差信息分为固定公差类、固定公差代号类和规则公差类,建立了带有公差信息的事物特性表.提出了基于事物特性表的公差主模型的建立方法,分析了基于事物特性表的公差变型设计过程.以工业汽轮机汽缸的公差变型设计为例进行了验证,结果表明,该方法可有效地提高公差模型的生成效率.
Abstract:

The result of variant design is usually a geometry model without tolerance information, so it is difficult to integrate seamlessly with process model, manufacturing model, measurement model, and so on. Tolerance information was analyzed according to the characteristics of variant design, and was classified into three categories: fixed tolerance value class, fixed tolerance code class and rule-based tolerance value class. Then tabular layouts of article characteristics (SML) with tolerance information were established. A method of generating tolerance master model based on SML was addressed, and a variant design process based on SML was proposed. The tolerance variant design method based on SML was applied to an industry steam turbine. Results show that the method can improve the efficiency of getting model with tolerance.
出版日期: 2009-11-29
:  TP 14  
基金资助:

国家自然科学基金资助项目（50975255）;国家“863”高技术研究发展计划资助项目（2007AA04Z117）；高等学校博士学科点专项科研基金资助项目（20060335134）.
作者简介: 纪杨建（1972-）,男,江苏如皋人,副教授,从事产品数字化设计、先进制造技术的研究.
服务　　
把本文推荐给朋友
加入引用管理器
E-mail Alert
RSS
作者相关文章　　

引用本文:

纪杨建, 虞再道, 祁国宁. 基于事物特性表的公差模型变型设计[J]. J4, 2009, 43(10): 1818-1822.

JI Yang-Jian, YU Zai-Dao, QI Guo-Ning. Variant design of tolerance model based on tabular layouts of article characteristics. J4, 2009, 43(10): 1818-1822.

链接本文:

http://www.zjujournals.com/eng/CN/10.3785/j.issn.1008-973X.2009.10.013    或    http://www.zjujournals.com/eng/CN/Y2009/V43/I10/1818

［1］ PAHL G, BEITZ W. Engineering design ［M］. New York: Springer Verlag,1984．
［2］ 余军合, 祁国宁. 事物特性表支持的变型设计方法［J］. 农业机械学报, 2005, 36(4): 107111．
YU Jun-he, QI Guo-ning. Study on the method of variant design based on SML［J］. Transactions of the Chinese Society of Agricultural Machinery, 2005, 36(4): 107111．
［3］ 祁国宁,SCHTTNER J,顾新建,等.一种面向大批量定制的产品建模方法［J］.计算机集成制造系统,2002,8(1):1316．
QI Guo-ning, SCHTTNER J, GU Xin-jian, et al. A method of product modeling faced mass customization ［J］. Computer Integrated Manufacturing Systems, 2002,8(1):1316．
［4］ MARTIN M V. Design for variety: a methodology for developing product platform architectures［D］. Stanford: Stanford University Press, 1999．
［5］肖新华,史明华,杨小凤,等.基于模块化产品实例的变型设计技术研究［J］.中国机械工程,2007,18(7):803807．
XIAO Xin-hua, SHI Ming-hua, YANG Xiao-feng, et al. Research on variant design based on modular product case［J］. China Mechanical Engineering,2007,18(7):803807．
［6］ 田野.互换性与测量技术［M］.北京：化学工业出版社,2006．
［7］ 李涛,刘凯奎,王永皎.Visual C++ + SQL Server数据库开发与实例［M］.北京：清华大学出版社,2006．
［8］ 侯永涛,丁向阳.UG/OPEN二次开发与实例精解［M］.北京：化学工业出版社,2007．
[1] 杨迷影,徐福缘,顾新建,张勇为,代风,毕经元. 基于认知导航模式的企业知识网络[J]. J4, 2011, 45(7): 1181-1186.
[2] 毕经元, 顾新建, 吕艳, 等. 基于知识元链接的汽车零部件知识管理系统[J]. J4, 2009, 43(12): 2208-2212.
[3] 张太华, 顾新建, 刘海强, 等. 企业协同中的零件本体映射[J]. J4, 2009, 43(12): 2287-2292.
[4] 胡恒杰, 顾新建, 吕艳, 等. 知识本体协同建立和应用[J]. J4, 2009, 43(12): 2300-2304.
[5] 张勇为, 顾新建, 胡恒杰, 等. 工艺设计知识资源网络的元数据模型研究[J]. J4, 2009, 43(10): 1828-1832.