Please wait a minute...
ZJUS-A
Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering)  2007, Vol. 8 Issue (11): 1853-1857    DOI: 10.1631/jzus.2007.A1853
Environmental & Energy Engineering     
Simulation study on radiative imaging of combustion flame in furnace
LIU Dong, WANG Fei, HUANG Qun-xing, YAN Jian-hua, CHI Yong, CEN Ke-fa
State Key Laboratory of Clean Energy Utilization, Zhejiang University, Hangzhou 310027, China
Download:     PDF (0 KB)     
Export: BibTeX | EndNote (RIS)      

Abstract  Radiative imaging of combustion flame in furnace of power plant plays an increasingly important role in combustion diagnosis. This paper presents a new method for calculating the radiative imaging of three-dimensional (3D) combustion flame based on Monte Carlo method and optical lens imaging. Numerical simulation case was used in this study. Radiative images were calculated and images obtained can not only present the energy distribution on the charge-coupled device (CCD) camera target plane but also reflect the energy distribution condition in the simulation furnace. Finally the relationships between volume elements and energy shares were also discussed.

Key words： Molten carbonate fuel cell (MCFC)      Least squares support vector machine (LS-SVM)      Genetic algorithm (GA)      Nonlinear predictive controller     
Received: 29 January 2007     
CLC:  TK22  
Service
E-mail this article
Add to my bookshelf
Add to citation manager
E-mail Alert
RSS
Articles by authors
LIU Dong
WANG Fei
HUANG Qun-xing
YAN Jian-hua
CHI Yong
CEN Ke-fa
Cite this article:

LIU Dong, WANG Fei, HUANG Qun-xing, YAN Jian-hua, CHI Yong, CEN Ke-fa. Simulation study on radiative imaging of combustion flame in furnace. Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering), 2007, 8(11): 1853-1857.

URL:

http://www.zjujournals.com/xueshu/zjus-a/10.1631/jzus.2007.A1853     OR     http://www.zjujournals.com/xueshu/zjus-a/Y2007/V8/I11/1853

[1] Hao Zheng, Yi-xiong Feng, Jian-rong Tan, Zhi-feng Zhang, Zi-xian Zhang. An integrated cognitive computing approach for systematic conceptual design[J]. Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering), 2016, 17(4): 286-294.
[2] Jin Cheng, Ming-yang Tang, Zhen-yu Liu, Jian-rong Tan. Direct reliability-based design optimization of uncertain structures with interval parameters[J]. Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering), 2016, 17(11): 841-854.
[3] Zhi-feng Zhang, Yi-xiong Feng, Jian-rong Tan, Wei-qiang Jia, Guo-dong Yi. A novel approach for parallel disassembly design based on a hybrid fuzzy-time model[J]. Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering), 2015, 16(9): 724-736.
[4] Hong-li QI, Hui ZHAO, Wei-wen LIU, Hai-bo ZHANG. Parameters optimization and nonlinearity analysis of grating eddy current displacement sensor using neural network and genetic algorithm[J]. Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering), 2009, 10(8): 1205-1212.
[5] Shervin VAKILI, Sied Mehdi FAKHRAIE, Siamak MOHAMMADI, Ali AHMADI. Low-cost fault tolerance in evolvable multiprocessor systems: a graceful degradation approach[J]. Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering), 2009, 10(6): 922-926.
[6] Mohsen GITIZADEH, Mohsen KALANTAR. Optimum allocation of FACTS devices in Fars Regional Electric Network using genetic algorithm based goal attainment[J]. Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering), 2009, 10(4): 478-487.
[7] Peng-fei LIU, Ping XU, Shu-xin HAN, Jin-yang ZHENG. Optimal design of pressure vessel using an improved genetic algorithm[J]. Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering), 2008, 9(9): 1264-1269.
[8] Li ZHU, Zhi-shu LI, Liang-yin CHEN, Yan-hong CHENG. Two-stage evolutionary algorithm for dynamic multicast routing in mesh network[J]. Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering), 2008, 9(6): 791-798.
[9] Arash SAYYAH, Mitra AFLAKI, Alireza REZAZADEH. Optimization of total harmonic current distortion and torque pulsation reduction in high-power induction motors using genetic algorithms[J]. Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering), 2008, 9(12): 1741-1752.
[10] Qing GAO, Qin-he ZHANG, Shu-peng SU, Jian-hua ZHANG. Parameter optimization model in electrical discharge machining process[J]. Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering), 2008, 9(1): 104-108.
[11] WU Xiao-juan, ZHU Xin-jian, CAO Guang-yi, TU Heng-yong. Nonlinear modelling of a SOFC stack by improved neural networks identification[J]. Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering), 2007, 8(9): 1505-1509.
[12] SUDHAKARAN M., AJAY-D-VIMALRAJ P., PALANIVELU T.G.. GA and PSO culled hybrid technique for economic dispatch problem with prohibited operating zones[J]. Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering), 2007, 8(6): 896-903.
[13] CHEN Yue-hua, CAO Guang-yi, ZHU Xin-jian. LS-SVM model based nonlinear predictive control for MCFC system[J]. Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering), 2007, 8(5): 748-754.
[14] Liu Hu-yao, He Yuan-jun. Algorithm for 2D irregular-shaped nesting problem based on the NFP algorithm and lowest-gravity-center principle[J]. Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering), 2006, 7(4): 570-576.
[15] Ma Qi-ming, Wang Xuan-yin, Du Shuan-ping. Method and application of wavelet shrinkage denoising based on genetic algorithm[J]. Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering), 2006, 7(3 ): 14-.