Please wait a minute...
ZJUS-A
Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering)  2000, Vol. 1 Issue (4): 456-458    DOI: 10.1631/jzus.2000.0456
Medicine     
INTRAOPERATIVE ERCP AND ENDOSCOPIC SPHINCTEROTOMY COMBINED WITH LAPAROSCOPIC CHOLECYSTECTOMY FOR TREA-TMENT OF CHOLELITHIASIS WITH CHOLEDOCHOLITHIASIS
GAO Min, ZHOU Wen, SHI Jian-ming, HONG De-fei, MU Yi-ping, WANG Jian-guo, WANG Yao-dong
Sir Run Run Shaw affiliated Hospital of Zhejiang University, Hangzhou 310016, China
Download:     PDF (0 KB)     
Export: BibTeX | EndNote (RIS)      

Abstract  Objective: To evaluate the benefit of intraoperative ERCP and endoscopic sphincterotomy (EST) combined with laparoscopic cholecystectomy (LC) in the treatment of cholelithiasis with choledocholithiasis. Methods: Fifty-two patients with cholelithiasis and choledocholithiasis(as determined by intraoperative cholangiography) were randomly divided into 2 groups during LC. In group A (27 patients), common bile duct stones were extracted by intraoperative EST during LC .In group B(25 patients), common bile duct (CBD) stones were extracted by conversion to open CBD exploration and cholecyctectomy. Results: The success rate was 26/27 (96.3%) in group A and 25/25 (100%) in group B (0.25

Key words： choledocholithiasis      EST      ERCP     
Received: 12 May 2000     
CLC:  TU311.3  
  TU973  
Service
E-mail this article
Add to my bookshelf
Add to citation manager
E-mail Alert
RSS
Articles by authors
ZHOU Wen
GAO Min
SHI Jian-ming
HONG De-fei
MU Yi-ping
WANG Jian-guo
WANG Yao-dong
Cite this article:

GAO Min, ZHOU Wen, SHI Jian-ming, HONG De-fei, MU Yi-ping, WANG Jian-guo, WANG Yao-dong. INTRAOPERATIVE ERCP AND ENDOSCOPIC SPHINCTEROTOMY COMBINED WITH LAPAROSCOPIC CHOLECYSTECTOMY FOR TREA-TMENT OF CHOLELITHIASIS WITH CHOLEDOCHOLITHIASIS. Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering), 2000, 1(4): 456-458.

URL:

http://www.zjujournals.com/xueshu/zjus-a/10.1631/jzus.2000.0456     OR     http://www.zjujournals.com/xueshu/zjus-a/Y2000/V1/I4/456

[1] Zhi Chao Ong, Hong Cheet Lim, Shin Yee Khoo, Zubaidah Ismail, Keen Kuan Kong, Abdul Ghaffar Abdul Rahman. Assessment of the phase synchronization effect in modal testing during operation[J]. Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering), 2017, 18(2): 92-105.
[2] Zi-qin Jiang, Yan-lin Guo, Ai-lin Zhang, Chao Dou, Cai-xia Zhang. Experimental study of the pinned double rectangular tube assembled buckling-restrained brace[J]. Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering), 2017, 18(1): 20-32.
[3] Junliang Tao, Jie Hu. Energy harvesting from pavement via polyvinylidene fluoride: hybrid piezo-pyroelectric effects[J]. Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering), 2016, 17(7): 502-511.
[4] Jia-long Jiao, Hui-long Ren, Shu-zheng Sun, Christiaan Adika Adenya. Investigation of a ship’s hydroelasticity and seakeeping performance by means of large-scale segmented self-propelling model sea trials[J]. Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering), 2016, 17(6): 468-484.
[5] Jin Cheng, Ming-yang Tang, Zhen-yu Liu, Jian-rong Tan. Direct reliability-based design optimization of uncertain structures with interval parameters[J]. Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering), 2016, 17(11): 841-854.
[6] Liang Ye, Yin-fu Jin, Shui-long Shen, Ping-ping Sun, Cheng Zhou. An efficient parameter identification procedure for soft sensitive clays[J]. Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering), 2016, 17(1): 76-88.
[7] Jin Yu, Shao-jie Chen, Xu Chen, Ya-zhou Zhang, Yan-yan Cai. Experimental investigation on mechanical properties and permeability evolution of red sandstone after heat treatments[J]. Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering), 2015, 16(9): 749-759.
[8] Jin Zhang, Qing-feng Xu, Yi-xiang Xu, Ming Zhang. Research on residual bending capacities of used wood members based on the correlation between non-destructive testing results and the mechanical properties of wood[J]. Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering), 2015, 16(7): 541-550.
[9] Pijush Samui, Dookie Kim, Bhairevi G. Aiyer. Pullout capacity of small ground anchor: a least square support vector machine approach[J]. Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering), 2015, 16(4): 295-301.
[10] Lei Fu, Zhen-ping Feng, Guo-jun Li, Qing-hua Deng, Yan Shi, Tie-yu Gao. Experimental validation of an integrated optimization design of a radial turbine for micro gas turbines[J]. Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering), 2015, 16(3): 241-249.
[11] Wei-yun Shao, Li-jie Jiang, Lei Fang, David Z. Zhu, Zhi-lin Sun. Assessment of the safe evacuation of people walking through flooding staircases based on numerical simulation[J]. Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering), 2015, 16(2): 117-130.
[12] Zi-qin Jiang, Yan-lin Guo, Xiao-an Wang, Bin Huang. Design method of the pinned external integrated buckling-restrained braces with extended core. Part I: theoretical derivation[J]. Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering), 2015, 16(10): 781-792.
[13] Zi-qin Jiang, Yan-lin Guo, Jing-zhong Tong, Xing Yuan. Design method of the pinned external integrated buckling-restrained braces with extended core. Part II: finite element numerical verification[J]. Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering), 2015, 16(10): 793-804.
[14] Hong-yan Wang, Li-hua Tang, Yuan Guo, Xiao-biao Shan, Tao Xie. A 2DOF hybrid energy harvester based on combined piezoelectric and electromagnetic conversion mechanisms[J]. Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering), 2014, 15(9): 711-722.
[15] Di Cui, Peng Zhang, Yu-hui Ma, Xiao He, Yuan-yuan Li, Yue-chun Zhao, Zhi-yong Zhang. Phytotoxicity of silver nanoparticles to cucumber (Cucumis sativus) and wheat (Triticum aestivum)[J]. Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering), 2014, 15(8): 662-670.