Please wait a minute...
浙江大学学报(工学版)
土木工程     
城市新鲜生活垃圾变形与强度的关联特性
张振营,严立俊
浙江理工大学 建筑工程学院,浙江 杭州 310018
Correlation properties of the deformation and the shear strength of  fresh municipal solid waste
ZHANG Zhen-ying, YAN Li-jun
School of Civil Engineering and Architecture, Zhejiang Sci-Tech University, Hangzhou 310018, China
 全文: PDF(917 KB)  
摘要:

为了研究新鲜生活垃圾压缩变形、抗剪强度的相关特性及其规律,参照杭州天子岭固体废弃物填埋场垃圾的主要成分,人工配制新鲜生活垃圾试样,采用大型压缩与直剪联合测定实验仪器,对新鲜生活垃圾试样进行压缩变形、强度联合测定试验,得到压缩量、孔隙比、时间与竖向压力的关系曲线.试样的初始孔隙比为2.1,试验竖向压力为25、50、100、200 kPa,每级竖向压力的作用时间分别为0、0.25、0.5、1、2、6、12、24 h.结果表明,新鲜生活垃圾的强度与垃圾压缩变形有关,随着竖向压力及压缩应变的增大而增大;城市新鲜生活垃圾的强度特性符合库仑强度理论;获得了垃圾的压缩性指标及抗剪强度参数.垃圾的压缩系数为1.4 MPa-1,压缩指数为0.372,内摩擦角在24°到31°之间,内聚力在9到23 kPa之间.

关键词: 大型压缩与直剪联合试验抗剪强度新鲜生活垃圾变形关联特性    
Abstract:

To investigate the correlation properties of the compressibility and the shear strength of the fresh municipal solid waste (MSW), the combined tests of compression test and direct shear test were carried out by a large-scale laboratory testing equipment. Referring to the major compositions of MSW from the Tianziling landfill in Hangzhou, China, the fresh municipal solid waste testing samples were prepared in geo-environmental laboratory. The initial void ratios of the samples were 2.1. Four different vertical pressures, which were 25, 50, 100, 200 kPa were selected, and the compression times for every vertical pressure were 0, 0.25, 0.5, 1, 2, 6, 12, and 24 hours, respectively. Basing on the testing results, the relationship between the deformation and the shear strength was studied, and the curve of the settlement-void ratio-compression time-vertical pressure was obtained. The testing results show that the shear strength of the MSW has some connection with the compression strain of the MSW, and the shear strength increase with the increasement of the vertical pressure and the compression strain. Besides, the relationship between the shear strength and the vertical pressure applied on the test sample is conformity with the law of Coulomb. Furthermore, some parameters of the compressibility and the shear strength of the MSW are obtained, those are the compression coefficient is 1.4 MPa-1, the compression index is 0.372, the internal friction angle varies from 24 to 31 degree, and the cohesion force varies from 9 to 23 kPa.

Key words: large-scale combined tests of compression test and direct shear test    deformation    shear strength    fresh municipal solid waste    correlation properties
出版日期: 2014-12-08
:  TU 43  
基金资助:

国家自然科学基金资助项目(51178432, 50878197);浙江省自然科学基金资助项目(LY14E080021);国家环境保护部公益项目(201009037)

作者简介: 张振营(1963-),男,教授,主要从事环境岩土工程领域的教学与研究工作.E-mail:zhangzhenyinga@163.com
服务  
把本文推荐给朋友
加入引用管理器
E-mail Alert
RSS
作者相关文章  
张振营
严立俊

引用本文:

张振营,严立俊. 城市新鲜生活垃圾变形与强度的关联特性[J]. 浙江大学学报(工学版), 10.3785/j.issn.1008-973X.2014.11.008.

ZHANG Zhen-ying, YAN Li-jun. Correlation properties of the deformation and the shear strength of  fresh municipal solid waste. JOURNAL OF ZHEJIANG UNIVERSITY (ENGINEERING SCIENCE), 10.3785/j.issn.1008-973X.2014.11.008.

链接本文:

http://www.zjujournals.com/xueshu/eng/CN/10.3785/j.issn.1008-973X.2014.11.008        http://www.zjujournals.com/xueshu/eng/CN/Y2014/V48/I11/1962

[1] VILAR O M, CARVALHO M F. Shear strength and consolidation properties of municipal solid waste[C]∥ Lnternational Workshop on Hydro-Physico-Mechanics of Landfills. France: Grenoble University I Press, 2005(3): 2l-22.
[2] GABR M A, HOSSAINS M S, BARLAZ M A. Shear strength parameters of municipal solid waste with leachate recirculation [J]. Journal of Geotechnical and Geo-environmental Engineering, ASCE, 2007(133):478-484.
[3] KAVAZANJIAN E. The impact of degradation on MSW shear strength[C]∥Proceedings of Sessions of GeoCongress 2008 - GeoCongress 2008: Geotechnics of Waste Management and Remediation, GSP 177. United States: ASCE, 2008: 224-231.
[4] BRAY J D, ZEKKOS D, KAVAZANJIAN E, et al. Shear strength of municipal solid waste [J]. Journal of Geotechnical and Geoenvironmental Engineering, ASCE, 2009, 135(6): 709-722.
[5] STARK T D, HUVAJ-SARIHAN N, LI G. Shear strength of municipal solid waste for stability analyses[J]. Environmental geology, 2009(57):1911-1923.
[6] CHRISTOPHER A B, CRAIG H B , TUNCER B E. Effects of waste composition and decomposition on the shear strength of municipal solid waste[J]. Journal of Geotechnical and Geo-environmental Engineering, ASCE, 2012(138):1161-1174.
[7] 冯世进, 陈云敏, 高丽亚, 等. 城市固体废弃物的剪切强度机理及本构关系[J].岩土力学,2007,28(12):2524-2528.
FENG Shi-jin, CHEN Yun-min, GAO Li-ya, et al. Shear strength mechanism and constitutive model of municipal solid waste [J]. Chinese Journal of Rock and Soil Mechanics, 2007, 28(12):2524-2528.
[8] 柯瀚. 城市固体废弃物填埋场的沉降、静力和动力稳定研究[D].杭州:浙江大学,2002.
KE Han. Research on settlement, static and dynamic stability of landfills for MSW [D]. Hangzhou: Zhejiang University, 2002.
[9] 王伟, 金鹏, 张芳. 短龄期城市固体垃圾直剪试验及应力位移模型[J]. 岩土力学.2011,32(增刊):166-170.
WANG Wei, JIN Peng, ZHANG Fang. Direct shear test of short-fill-age municipal solid wastes and its shear stress-deformation model[J].Chinese Journal of Rock and Soil Mechanics, 2011,32(supp1):166-170.
[10] 冯世进, 周子范, 陈云敏, 等. 城市固体废弃物剪切强度参数的研究[J]. 浙江大学学报:工学版.2005,39(7):987-991.
FENG Shi-jin, ZHOU Zi-fan, CHEN Yun-min, et al. Study on shear strength parameters of municipal solid waste[J]. Journal of Zhejiang University:Engineering Science, 2005, 39(7):987-991.
[11] 冯世进, 陈云敏, 孔宪京, 等. 城市固体废弃物的动力特性和动强度试验研究[C\]∥第7届全国土动力学学术会议论文集. 北京, 清华大学出版社, 2006,82-86.
FENG Shi-jin, CHEN Yun-min, KONG Xian-jing, et al. Experimental research on dynamic properties and dynamic strength of municipal solid waste[C]∥The 7th Chinese symposium on Soil Dynamics. Beijing: Tsinghua University Press. 2006, 82-86.
[12] 旦增顿珠, 介玉新, 魏弋峰, 等. 垃圾土的强度特性试验研究[J]. 清华大学学报:自然科学版,2006,46(9):1538-1541.
DANZENG Dun-zhu, JIE Yu-xin, WEI Yi-feng, et al. Strength characteristics of municipal solid waste[J]. Journal of Tsinghua University :Science & Technology, 2006, 46(9): 1538-1541.
[13] 孙秀丽, 孔宪京, 邹德高, 等. 城市固体废弃物应力–应变模型研究[J]. 岩 土 工 程 学 报, 2008,30(5):726-731.
SUN Xiu-li, KONG Xian-jing, ZOU De-gao, et al. Stress-strain model for municipal solid waste[J]. Chinese Journal of Geotechnical Engineering, 2008, 30(5):726-731.
[14] 张振营. 城市生活垃圾压缩特性及填埋场的沉降研究[D]. 杭州:浙江大学, 2005.
ZHANG Zhenying. Study on the compressibility and the settlement of the municipal solid waste landfill [D]. Hangzhou: Zhejiang University, 2005.
[15] 张振营, 陈云敏. 固体废弃物压缩特性及填埋场沉降研究[J].岩土工程学报, 2005,27(1):116-120.
ZHANG Zhen-ying, CHEN Yun-min. Study on the compressibility and the settlement of landfill with municipal solid waste [J]. Chinese Journal of Geotechnical Engineering, 2005, 27(1):116-120.
[16] 张振营, 杨云芳, 吴长富, 等. 城市固体垃圾应力压缩计算方法[J]. 浙江大学学报:工学版, 2009,43(2):370-375.
ZHANG Zhen-ying, YANG Yun-fang, WU Chang-fu, et al. Calculation method of stress compression for municipal solid waste[J]. Journal of Zhejiang University :Engineering Science, 2009, 43(2):370-375.
[17] 孙秀丽, 孔宪京, 邹德高, 等. 城市固体垃圾应力-应变-时间关系试验研究[J]. 岩土力学, 2011,32(8):2331-2335.
SUN Xiu-li, KONG Xian-jing, ZOU De-gao, et al. Stress-strain-time relationship for municipal solid waste[J]. Chinese Journal of Rock and Soil Mechanics, 2011, 32(8):2331-2335.

[1] 朱晓强, 余涛. 头戴设备VR环境下基于网格变形的交互雕刻建模[J]. 浙江大学学报(工学版), 2018, 52(3): 599-604.
[2] 张颜, 李素贞, 张弛, 陈圣杰, 孙伟杰. 高速交通轨道梁高精度光纤变形监测[J]. 浙江大学学报(工学版), 2018, 52(2): 325-332.
[3] 张雪辉, 陈吉祥, 白云, 陈昂, 黄德中. 类矩形土压平衡盾构施工引起的地表变形[J]. 浙江大学学报(工学版), 2018, 52(2): 317-324.
[4] 余翔, 孔宪京, 邹德高. 混凝土防渗墙变形与应力分布特性[J]. 浙江大学学报(工学版), 2017, 51(9): 1704-1711.
[5] 郭超, 侯增选, 杨广卿, 郑栓柱. 采用力反馈技术的毛笔建模[J]. 浙江大学学报(工学版), 2017, 51(9): 1735-1744.
[6] 范海贵, 陈志平, 徐烽, 唐小雨, 苏文强. 基于实测沉降的浮顶储罐变形分析[J]. 浙江大学学报(工学版), 2017, 51(9): 1824-1833.
[7] 李卓峰, 林伟岸, 朱瑶宏, 边学成, 叶俊能, 高飞, 陈云敏. 坑底加固控制地铁基坑开挖引起土体位移的现场测试与分析[J]. 浙江大学学报(工学版), 2017, 51(8): 1475-1481.
[8] 康志军, 黄润秋, 卫彬, 谭勇. 上海软土地区某逆作法地铁深基坑变形[J]. 浙江大学学报(工学版), 2017, 51(8): 1527-1536.
[9] 陈仁朋, 叶跃鸿, 王诚杰, 孟凡衍. 大型地下通道开挖对下卧地铁隧道上浮影响[J]. 浙江大学学报(工学版), 2017, 51(7): 1269-1277.
[10] 陈健, 王进, 陆国栋. 电极损耗分层预变形补偿方法[J]. 浙江大学学报(工学版), 2017, 51(3): 436-444.
[11] 许贤, 蔡晖映, 孙凤先, 罗尧治. 基于线性规划的张拉整体结构位移优化控制[J]. 浙江大学学报(工学版), 2017, 51(11): 2093-2100.
[12] 黄赠, 王锐, 赵宇, 魏振磊. 隐伏断层地震诱发滑坡易发性评价[J]. 浙江大学学报(工学版), 2017, 51(11): 2136-2143.
[13] 李飞, 朱鸿鹄, 张诚成, 施斌. 地基变形光纤光栅监测可行性的试验研究[J]. 浙江大学学报(工学版), 2017, 51(1): 204-211.
[14] 童水光, 贾亚萍, 余跃, 唐宁, 谢国生, 沈强, 从飞云. 动点间歇性冲击变形计算方法的研究[J]. 浙江大学学报(工学版), 2017, 51(1): 124-130.
[15] 俞慈君, 宋凯, 李江雄, 金涨军, 樊新田, 章明. 基于LevenbergMarquardt算法的线性热变形补偿系数矩阵优化[J]. 浙江大学学报(工学版), 2016, 50(6): 1056-1064.