Please wait a minute...
浙江大学学报(工学版)
J4  2013, Vol. 47 Issue (10): 1815-1823    DOI: 10.3785/j.issn.1008-973X.2013.10.017
土木工程     
人字撑-钢框架弹塑性抗侧性能的精细化研究
张磊, 罗桂发, 童根树
浙江大学 土木工程学系,浙江 杭州 310058
Refined study on lateral-force resistance of dual structural system composed of moment-resisting frame and chevron braces
ZHANG Lei, LUO Gui-fa, TONG Gen-shu
Department of Civil Engineering, Zhejiang University, Hangzhou 310058, China
 全文: PDF 
摘要：

为了研究人字撑-钢框架双重抗侧力结构体系中受压支撑屈曲后的剩余强度、框架抗侧强度对结构体系抗侧性能的影响以及结构体系的最大抗侧承载力等问题,在考虑现行规范相关规定的基础上,设计50个典型人字撑-框架结构算例,开展弹塑性抗侧性能的非线性有限元分析.研究组成结构体系的2个子结构支撑架和框架在整个抗侧过程中的性能及其对结构体系总的抗侧性能的影响.结果表明,结构体系的抗侧性能在压撑屈曲后存在快速下降,框架的相对强弱对下降幅度具有重要的影响|框架与支撑的极限承载力之和不能作为结构体系的抗侧承载能力.根据计算结果提出人字撑横梁承受的不平衡力的改进计算方法.
关键词： 人字撑;  框架;  双重抗侧力体系;  超强;  层侧移角    
Abstract:

To investigate the post-buckling strength of the compressive brace in the chevron braced frame, the strength of the moment-resisting frame to the behavior of the dual structural system and the lateral load carrying capacity of the dual structural system, a series of nonlinear finite element analysis were conducted on the dual structural system using 50 typical numerical examples considering the provisions of the current design code. Special concerns were paid on the performances of the two substructures of the dual structural system, the moment-resisting frame and the chevron braces, in the entire loading history and their contributions to the behavior of the dual structural system. Results show that the lateral loading capacity of the dual system may rapidly decrease after the buckling of the compressive brace, where the decrease magnitude in the lateral loading capacity depends largely on the relative strength of the moment-resisting frame. The lateral loading capacity of the dual system may not be the sum of those of its two substructures. A refined method for the unbalance force acting at the beam of the chevron braced frame was proposed based on the analysis results.
Key words: chevron brace    moment-resisting frame    dual structural system    overstrength    storey drift ratio
出版日期: 2013-11-05
:  TU 391  
基金资助:

国家自然科学基金资助项目（51078328, 50908203）|中央基本科研经费资助项目（2011FZA4016）|浙江省重点科技创新团队资助项目（2010R50034）.
通讯作者: 童根树，男，教授.     E-mail: tonggs@zju.edu.cn
作者简介: 张磊(1978—), 男，副教授，从事钢结构稳定和抗震研究. E-mail: celzhang@zju.edu.cn
服务　　
把本文推荐给朋友
加入引用管理器
E-mail Alert
RSS
作者相关文章　　

引用本文:

张磊, 罗桂发, 童根树. 人字撑-钢框架弹塑性抗侧性能的精细化研究[J]. J4, 2013, 47(10): 1815-1823.

ZHANG Lei, LUO Gui-fa, TONG Gen-shu. Refined study on lateral-force resistance of dual structural system composed of moment-resisting frame and chevron braces. J4, 2013, 47(10): 1815-1823.

链接本文:

http://www.zjujournals.com/xueshu/eng/CN/10.3785/j.issn.1008-973X.2013.10.017    或    http://www.zjujournals.com/xueshu/eng/CN/Y2013/V47/I10/1815

［1］ WU T Y. Extraction of flow energy by a wing oscillating in waves ［J］. Journal of Ship Research, 1972, 14(1): 66-78.

［2］ WU T Y, CHWANG A T. Extraction of flow energy by fish and birds in a wavy stream ［C］∥Proceedings of the Symposium on Swimming and Flying in Nature. New York: Plenum Press, 1975.

［3］ MCKINNEY W, DELAURIER J. The wingmill: an oscillatingwing windmill ［J］. Journal of Energy, 1981, 5(2): 109115.

［4］ JONES K D, PLATZER M F. Numerical computation of flappingwing propulsion and power extraction ［C］ ∥35th Aerospace Sciences Meeting and Exhibit. Reno, NV: AIAA Paper, 1997.

［5］ SIMPSON B J, LICHT S, HOVER F S, et al. Energy extraction through flapping foils ［C］ ∥27th International Conference on Offshore Mechanics and Arctic Engineering. Berlin: ［s.n.］, 2008: 389-395.

［6］ DUMAS G, KINSEY T. Eulerian simulations of oscillating airfoils in power extraction regime ［C］ ∥Advances in Fluid Mechanics VI. Southampton, UK: WIT, 2006: 245-254.

［7］ 杨洋,童根树,张磊.压杆轴力与轴向位移全过程曲线的近似表达式［J］.工程力学,2012,29(9): 17-24.

YANG Yang, TONG Genshu, ZHANG Lei. Solution of loaddisplacement curve for members in compression ［J］. Engineering Mechanics, 2012,29(9): 17-24.

［8］ BRANDONISIO G, TORENO M, MELE E, et al. Seismic design of concentric braced frames ［J］. Journal of Constructional Steel Research, 2012, 78(1): 22-37.

［9］ MARINO E M, NAKASHIMA M. Seismic performance and new design procedure for chevronbraced frames ［J］. Earthquake Engineering and Structural Dynamics, 2006, 35(4): 433-452.

［10］ GB500112010,建筑抗震设计规范［S］. 北京: 中国建筑工业出版社, 2010.

［11］ DOMINGUEZ E A, COLUNGA A. Nonlinear behavior of codedesigned reinforced concrete concentric braced frames under lateral loading ［J］. Engineering Structures, 2010, 32(4): 944-963.

［12］ MFDC04, Reglamento de construcciones para el distrito federal ［S］. México City: Gaceta Oficial del Departamento del Distrito Federal, 2004.

［13］ OKAZAKI T, LIGNOS D G, HIKINO T, et al. Dynamic response of a steel concentrically braced frame ［C］∥ Proceedings of ASCE Structures Congress. Las Vegas: ASCE, 2011: 950-959.

［14］ KIM J, LEE Y, CHOI H. Progressive collapse resisting capacity of braced frames ［J］. The Structural Design of Tall and Special Buildings, 2011, 20(2): 257-270.

［15］ GB500172003,钢结构设计规范［S］. 北京: 中国计划出版社, 2003.

［16］ UBC1997, The uniform building code ［S］. Whittier: International Conference of Building Officials, 1997.

［17］ BECKER R. Seismic design of special concentrically braced steel frames ［M］. Moraga: Structural Steel Educational Council, 1995.

［18］ 童根树. 钢结构的平面内稳定［M］. 北京：中国建筑工业出版社,2005.
[1] 李英民, 杨龙, 刘烁宇, 罗文文. 基于可恢复指标的结构损伤机制评价方法[J]. 浙江大学学报(工学版), 2017, 51(11): 2197-2206.
[2] 罗仕鉴, 董烨楠. 面向创意设计的器物知识分类研究[J]. 浙江大学学报(工学版), 2017, 51(1): 113-123.
[3] 熊海贝,曹纪兴,张凤亮. 含加强层框筒结构位移监测方法[J]. 浙江大学学报(工学版), 2016, 50(9): 1752-1760.
[4] 管东芝, 郭正兴, 于建兵, 杨森. 钢绞线锚入式预制砼框架节点构造及试验[J]. 浙江大学学报(工学版), 2016, 50(2): 282-291.
[5] 丁兵, 刘同宦, 雷文韬, 李最森. 四面六边透水框架防护层稳定性试验[J]. 浙江大学学报(工学版), 2015, 49(2): 251-256.
[6] 苏亮,索靖,宋明亮. 钢筋砼框架结构易损性评估的参数敏感性分析[J]. 浙江大学学报(工学版), 2014, 48(8): 1384-1390.
[7] 诸利君, 陈芨熙, 王子龙, 暴志刚, 顾新建, 乐承毅. 面向全生命周期的合同能源管理支持系统[J]. J4, 2014, 48(2): 190-199.
[8] 金苍宏,吴明晖,应晶. 一种基于上下文索引的文本匹配框架[J]. J4, 2013, 47(9): 1537-1546.
[9] 孙晓东,陈龙,杨泽斌,朱熀秋,嵇小辅. 贝叶斯证据框架下LS-SVM的BPMSM磁链建模[J]. J4, 2012, 46(5): 873-877.
[10] 苏宁粉, 吕西林, 周颖, 齐虎. 某立面收进复杂高层建筑结构抗震性能评估[J]. J4, 2012, 46(10): 1893-1899.
[11] 童根树, 郭峻. 剪切型支撑框架的假想荷载法[J]. J4, 2011, 45(12): 2142-2149.
[12] 陈龙, 陆国栋, 邓卫燕, 王进. 基于路径理论的服装模型约束求解技术[J]. J4, 2010, 44(3): 589-594.
[13] 焦彬如, 杨军, 郭昌生, 李水明. 超长混凝土框架裂缝控制计算关键技术[J]. J4, 2010, 44(10): 2036-2040.
[14] 刘征, 孙守迁, 潘云鹤. 基于信息框架的设计师认知策略划分及应用[J]. J4, 2009, 43(5): 884-889.
[15] 胡浩 祁国宁 方水良 张太华 崔剑. 基于产品服务数据的客户需求挖掘[J]. J4, 2009, 43(3): 540-545.