Please wait a minute...
浙江大学学报(工学版)
J4  2013, Vol. 47 Issue (2): 280-286    DOI: 10.3785/j.issn.1008-973X.2013.02.014
能源工程     
液态排渣炉燃烧过程的数值模拟
李代力, 王智化, 许岩韦, 曹欣玉, 黄镇宇, 周俊虎, 岑可法
浙江大学 能源清洁利用国家重点实验室,浙江 杭州 310027
Numerical simulation of combustion process for
a slag tapping boiler
LI Dai-li, WANG Zhi-hua, XU Yan-wei, CAO Xin-yu, HUANG Zhen-yu
State Key Laboratory of Clean Energy Utilization, Zhejiang University, Hangzhou 310027, China
 全文: PDF 
摘要：

针对一台液态排渣旋风炉在不同配风方案下炉内燃烧过程和NOx分布进行三维数值模拟分析,建立液态排渣旋风炉内的流动和燃烧的数学模型,针对近壁燃烧的情况采用trap方式对炉内随气流运动的颗粒进行壁面捕捉.计算结果详细描述炉内的流场组织、温度场、氧气质量分数及不同配风情况下的NOx分布情况,并与该炉运行实验数据进行比较验证.计算结果显示,3种配风方式下液态排渣炉的燃烧均较为完全；相比较其他配风方式而言,分级配风方式下燃烧温度场分布更为均匀,顶部旋流二次风和切向二次风的共同作用加强了炉内气流的扰动,强化了炉内燃烧,使得整个炉膛的温度水平均维持在较高温度段,能够提供足够高温的烟气以满足裂解要求；同时下2层二次风强化了炉内水煤浆颗粒的燃烧,能够更好的抑制NOx的生成,采用分级配风方式下炉膛出口NOx质量浓度可低至684 mg/m3,可以有效减少NOx排放.
关键词： 旋风炉;  数值模拟;  液态排渣;  燃烧;  水煤浆    
Abstract:

 In order to investigate the combustion process and NOx formation properties in a coal water slurry fired slag tapping boiler, a three dimensional computational fluid dynamics (CFD) simulation work was conducted. Standard k-ε turbulence model and nonpremixed combustion model was used here. Specially, for the treatment of particle during the slag tapping combustion process, particle trapping method was used for the surface boundary condition. The flow field, temperature and oxygen distribution as well as NOx in the furnace were analyzed and validated with real case experimental data. Results show that the combustion process in the furnace are all complete at the three different air feeding modes. Compared to typical air feeding conditions, temperature distributes in the furnace is more uniform at staged air method. The swirl secondary air on the top together with tangential secondary air enhances the airflow distribution in the furnace. This also enhances the combustion process and maintains the whole furnace running at a high temperature level, which is need by the downstream petroleum cracking process. The exiting of downstream secondary air enhances the burn out of the coal particles and inhibits NOx emission to 684 mg/m3 at staged combustion mode. Therefore, the coal water slurry fired slag tapping boiler can be running well at staged combustion mode with uniform temperature distribution and low NOx emission.
Key words: cyclone furnace    CFD    slag tapping    combustion    coal-water slurry
出版日期: 2013-03-14
:  TK 229  
通讯作者: 王智化,男,副教授,硕导,副博导.     E-mail: wangzh@zju.edu.cn
作者简介: 李代力（1987—）,女,研究生,主要从事数值模拟计算方面的研究.E-mail:ldlcandy@gmail.com
服务　　
把本文推荐给朋友
加入引用管理器
E-mail Alert
RSS
作者相关文章　　

引用本文:

李代力, 王智化, 许岩韦, 曹欣玉, 黄镇宇, 周俊虎, 岑可法. 液态排渣炉燃烧过程的数值模拟[J]. J4, 2013, 47(2): 280-286.

LI Dai-li, WANG Zhi-hua, XU Yan-wei, CAO Xin-yu, HUANG Zhen-yu. Numerical simulation of combustion process for
a slag tapping boiler. J4, 2013, 47(2): 280-286.

链接本文:

http://www.zjujournals.com/xueshu/eng/CN/10.3785/j.issn.1008-973X.2013.02.014    或    http://www.zjujournals.com/xueshu/eng/CN/Y2013/V47/I2/280

［1］ GB13223—2003.火电厂大气污染物排放标准［S］.北京：中国环境科学出版社,2003.
GB13223—2003. Emission standard of air pollutants for thermal power plants ［S］. Beijing: China Environmental Science Press,2003.
［2］ 吉登高,张丽娟,高明峰,等.我国水煤浆制备与燃烧技术的发展［J］.选煤技术.2004(4): 15-17.
JI Deng-gao, ZHANG Li-juan, GAO Ming-feng, et al. Coalwater slurry preparation and development of combustion technology ［J］. Coal Preparation Technology, 2004(4): 15-17.
［3］ 严响林,徐党旗,聂剑平.液态排渣炉下炉膛一维热流密度分布特性计算［J］.热力发电.2010(9): 27-29.
YAN Xiang-lin, XU Dang-qi, NIE Jian-ping. One dimentional heat flux distribution characters in lower furnace of boilers with wet bottom ［J］. Thermal Power Generation, 2010(9): 27-29.
［4］ 汪小憨,赵黛青,何立波,等.颗粒附壁燃烧机理及模拟方法探讨［J］.力学学报. 2006(4): 462-470.
WANG Xiao-han, ZHAO Dai-qing, HE Li-bo, et al. Study on the mechanism and simulation method for wall burning process ［J］. Chinese Journal of Theoretical and Applied Mechanics, 2006(4): 462-470.
［5］ 汪小憨,赵黛青,何立波,等.煤粉燃烧的灰渣沉积数值模型研究［J］.力学进展.2005(3): 417-426.
WANG Xiaohan, ZHAO Daiqing, HE Libo, et al. A review on numerical modeling of ash deposition during the process of pulverized coal combustion ［J］. Advances in Mechanics, 2005(3): 417-426.
［6］ 周俊虎,匡建平,周志军,等.粉煤气化炉冷态和热态流场分布特性的数值模拟［J］.中国电机工程学报.2007(20): 30-35.
ZHOU Jun-hu, KUANG Jian-ping, ZHOU Zhijun, et al. Numerical simulation for pulverized coal gasifier‘s fluid flow characteristic on cold and hot condition ［J］. Proceedings of the CSEE, 2007(20): 30-35.
［7］ 唐志国,马培勇,俞瑜,等.新型干煤粉气流床气化炉的数值模拟［J］.煤炭学报.2010(3): 481-485.
TANG Zhi-guo, MA Pei-yong, YU Yu, et al. Numerical simulation of a new dryfeed entrainedflow coal gasifier［J］. Journal of China Coal Society, 2010(3): 481-485.
［8］ WANG X H, ZHAO D Q, HE L B, et al. Modeling of a coal-fired slagging combustor: Development of a slag submodel ［J］. Combustion and Flame. 2007, 149(3): 249-260.
［9］ 郭建民,刘石,姜凡,等.利用CCD测量炉膛温度场及NOx排放特性试验研究［J］.热能动力工程.2006(1): 39-42.
GUO Jianmin, LIU Shi, JIANG Fan, et al. Experimental study of the measurement of fuenace temperature fields and NOx emission characteristics with the help of a charge-coupled device(CCD) ［J］. Journal of Engineering for Themal Energy & Power, 2006, 21(1): 39-42.
［10］ ANSYS. ANSYS FLUENT 12.0/12.1 Documentation［EB/OL］. ［2013-01-11］. https: ∥www.sharcnet.ca/Software/Fluent12/index.htm.
［11］ 于延科.基于无焰燃烧的燃油锅炉节能改造研究［D］.合肥:中国科学技术大学, 2011.
YU Yan-ke. Study of an oil boiler transformation for energy saving on the basis of flameless combustion ［D］. Hefei: University of Science and Technology of China, 2011.
［12］ 王超.可调式机械雾化喷嘴的燃烧性能研究［D］.青岛:中国石油大学, 2011.
WANG Chao. Adjustable mechanical atomizing nozzle［D］. Qingdao: China University of Petroleum, 2011.
［13］ 吴超.湍流燃烧模型在燃烧室数值计算中的应用研究［D］.沈阳:沈阳航空工业学院, 2009.
WU Chao. Study on applicability of turbulent combustion model in the numerical calculation of combustor［D］. Shenyang: Shen Yang Institute of Aeronautical Engineering, 2009.
［14］ 赵坚行. 燃烧的数值模拟［M］. 北京: 科学出版社, 2002.
［15］ 郭治民,张会强,王希麟,等.简化的联合PDF模型模拟湍流燃烧中NO生成［J］.清华大学学报自然科学版.2002(11): 1504-1507.
GUO Zhimin, ZHANG Hui-qiang, WANG Xi-ling, et al. Prediction of NO formation in turbulent combustion using presumed joint PDF model ［J］. Journal of Tsinghua University Science and Technology, 2002(11): 1504-1507.
［16］ 付玉洪.立式旋风炉的特点及技术应用［J］.中国氯碱.2003(7): 29-38.
FU Yuhong. Characteristics and application of Vertical cyclone furnace ［J］. China Chlor-Alkali, 2003(7): 29-38.
［17］ 国家经贸委节能信息传播中心.液态排渣立式旋风炉技术及应用［J］.设备管理与维修.2002(6): 36-37.
The state economic and trade commission energy conservation information dissemination center issued slag tapping boiler swirling technology and application ［J］. Plant Maintenance Engineering. 2002(6): 36-37.
［18］ 陈运铣.旋风炉内固相质点的分布规律及炉内燃烧过程机理的商榷［J］.浙江大学学报:工学版.1963(2): 85-128.
CHEN Yun-xian. Distribution regularity of solid-phase particles in the cyclone furnace and discussion of combustion process mechanism in it ［J］. Journal of Zhejiang University Engineering Science, 1963(2): 85-128.
［19］ 张彦威,薄煜.燃煤及煤浆型裂解炉试验技术报告［R］.杭州: 浙江大学, 2011.
ZHANG Y W, BO Y. Coalfired and slag tapping boiler test technical report ［R］. Hangzhou: Zhejiang University, 2001.
［20］ EATON A M, SMOOT L D, HILL S C, et al. Components, formulations, solutions, evaluation, and application of comprehensive combustion models ［J］. Progress in Energy and Combustion Science. 1999, 25(4): 387-436.
[1] 赵庆辰, 周俊虎, 王业峰, 龙宇, 李欣婷, 杨卫娟. 微小圆管内正丁醇催化燃烧及动力学特性[J]. 浙江大学学报(工学版), 2018, 52(1): 59-64.
[2] 段毅, 程乐鸣, 吴雪松, 邱坤赞, 骆仲泱. 内嵌换热面双层多孔介质预混燃烧试验研究[J]. 浙江大学学报(工学版), 2017, 51(8): 1626-1632.
[3] 刘瑞媚, 刘玉坤, 王智化, 刘颖祖, 胡利华,邵哲如, 岑可法. 垃圾焚烧炉排炉二次风配风的CFD优化模拟[J]. 浙江大学学报(工学版), 2017, 51(3): 500-507.
[4] 韩运动, 姚松. 高速列车气动性能的尺度效应分析[J]. 浙江大学学报(工学版), 2017, 51(12): 2383-2391.
[5] 张晓涛,谭翀,陆愈实. 传统控烟设施对空气幕阻烟性能的影响[J]. 浙江大学学报(工学版), 2016, 50(9): 1738-1745.
[6] 夏宇,仇性启,惠媛媛. 伴有参与性介质的开口系统传热研究[J]. 浙江大学学报(工学版), 2016, 50(7): 1367-1372.
[7] 高航, 付有志, 王宣平, 彭灿. 螺旋面磨料流光整加工仿真与试验[J]. 浙江大学学报(工学版), 2016, 50(5): 920-926.
[8] 李春艳,张功,刘杰,高忠权. 排除法确定离子电流成因的试验[J]. 浙江大学学报(工学版), 2016, 50(5): 978-983.
[9] 李正昊,楼文娟,章李刚,卞荣,段志勇. 地貌因素对垭口内风速影响的数值模拟[J]. 浙江大学学报(工学版), 2016, 50(5): 848-855.
[10] 周昊, 马炜晨, 杨玉, 陈建中. 低氮煤粉旋流燃烧器火焰特性的研究[J]. 浙江大学学报(工学版), 2016, 50(4): 698-703.
[11] 刘子豪, 周昊, 周明熙, 程明, 刘瑞鹏, 岑可法. 焦粉粒径对烧结床中燃烧带分布的影响[J]. 浙江大学学报(工学版), 2016, 50(4): 691-697.
[12] 李媛, 尹雪峰, 张志磊. 负钛铜基载氧体在煤化学链燃烧中多环芳烃的生成[J]. 浙江大学学报(工学版), 2016, 50(2): 360-368.
[13] 刘海龙, 周家伟, 陈云敏, 李育超, 詹良通. 城市生活垃圾填埋场稳定化评估[J]. 浙江大学学报(工学版), 2016, 50(12): 2336-2342.
[14] 黄眺,杨卫娟,周俊虎,王智化,刘建忠,岑可法. 微型圆管中正庚烷/空气预混催化燃烧特性实验[J]. 浙江大学学报(工学版), 2016, 50(11): 2058-2063.
[15] 唐志刚,张力,陈曦,王庆朋. 壁面温度对微型内燃机燃烧特性的影响[J]. 浙江大学学报(工学版), 2016, 50(11): 2107-2112.