Please wait a minute...
浙江大学学报(工学版)
J4  2010, Vol. 44 Issue (3): 574-580    DOI: 10.3785/j.issn.1008-973X.2010.03.029
机械工程     
带U形节流槽的滑阀稳态液动力研究
方文敏1,2, 成琳琳1, 傅新1, 周华1, 杨华勇1
1. 浙江大学 流体传动及控制国家重点实验室, 浙江 杭州 310027; 2. 解放军炮兵学院, 安徽 合肥 230031
Investigation on steady-state flow force of spool valve with U-grooves
FANG Wenmin1,2, CHENG Linlin1, FU Xin1, ZHOU Hua1, YANG Huayong1
1.State Key Laboratory of Fluid Power Transmission and Control, Zhejiang University, Hangzhou 310027, China;
2. Artillery Academy, Hefei 230031, China
 全文: PDF 
摘要：


摘要: 传统液动力理论计算公式难以准确预测带U形节流槽滑阀的稳态液动力,针对该问题以多路阀为测试对象,搭建高精度液动力测试平台,试验获得不同流动方向下的稳态液动力和阀口压力、流量特性,并用计算流体力学（CFD）对阀内流场进行了仿真.试验和仿真数据表明,带U形节流槽的滑阀的稳态液动力在单向流出流入和在双向进出油情况下均会出现负值,即使阀口趋于打开；三位六通阀双向进出油稳态液动力值与单向流出流入稳态液动力耦合值基本一致；仿真所得稳态液动力值和压差值与试验值吻合良好.
关键词： 稳态液动力;  三位六通阀;  U形节流槽;  流场仿真    
Abstract:

It is difficult to accurately predict the steadystate flow force of spool valve with Ugrooves by the traditional theoretical formulae of flow force. To resolve the problem, a platform with highprecision experimental apparatus and system was built to investigate the steadystate flow force with a multiway valve as objective, which aimed at obtaining the characteristics of steadystate flow force in different flow directions and the pressure and flow rate characteristics of valve notch. The flow field in the valve was also simulated with computational fluid dynamic (CFD). Both the experimental and simulation results show that the steadystate flow force with Ugrooves tends to be negative, which means that the valve notch tends to be open no matter in single in/out flow direction or in double flow directions. The coupling value of the steadystate flow force in the case of single in/out flow direction of the 3/6 valve is almost the same as that in the case of double flow directions. The simulation results of the steadystate flow force together with the pressure difference matched the experimental results well.
Key words: steady-state flow force    three-position-six-way valve (3/6 valve)    U-groove    flow field simulation
出版日期: 2010-04-01
:  TH 137  
基金资助:

国家“973”重点基础研究发展规划资助项目(2006CB705400)；国家杰出青年科学基金资助项目(50425518)；
通讯作者: 傅新，男，教授.     E-mail: xfu@zju.edu.cn
作者简介: 方文敏(1974—)，女，安徽寿县人，讲师，主要从事流体应用基础理论研究.E-mail: fangwenmin@163.com
服务　　
把本文推荐给朋友
加入引用管理器
E-mail Alert
RSS
作者相关文章　　
方文敏
成琳琳
傅新
周华
杨华勇

引用本文:

方文敏, 成琳琳, 傅新, 周华, 杨华勇. 带U形节流槽的滑阀稳态液动力研究[J]. J4, 2010, 44(3): 574-580.

FANG Wen-Min, CHENG Lin-Lin, FU Xin, ZHOU Hua, YANG Hua-Yong. Investigation on steady-state flow force of spool valve with U-grooves. J4, 2010, 44(3): 574-580.

链接本文:

http://www.zjujournals.com/xueshu/eng/CN/10.3785/j.issn.1008-973X.2010.03.029    或    http://www.zjujournals.com/xueshu/eng/CN/Y2010/V44/I3/574

［1］ 冀宏,傅新,杨华勇.非全周开口滑阀稳态液动力研究［J］.机械工程学报,2003,39(6): 1317.
JI Hong, FU Xin, YANG Huayong. Investigation on the steadystate flow force of noncircular opening spool valve［J］. Chinese Journal of Mechanical Engineering, 2003, 39(6): 1317.
［2］ AMIRANTE R, DEL VESCOVO G, LIPPOLIS A. Flow forces analysis of an open center hydraulic directional control valve sliding spool［J］. Energy Conversion and Management, 2006, 47: 114131.
［3］ AMIRANTE R, DEL VESCOVO G, LIPPOLIS A. Evaluation of the flow forces on an open centre directional control valve by means of a computational fluid dynamic analysis ［J］. Energy Conversion and Management, 2006, 47: 17481760.
［4］ AMIRANTE R, MOSCATELLI B P G, CATALANO L A. Evaluation of the flow forces on a direct (single stage) proportional valve by means of a computational fluid dynamic analysis［J］. Energy Conversion and Management, 2007, 48: 924953.
［5］ 曹秉刚,史维祥,中野和夫.内流式锥阀液动力的理论探讨［J］.西安交通大学学报,1995,29(7): 16.
CAO Binggang, SHI Weixing, Kazuo Nakano. Theoretical discussion on flow force of a converged flow poppet valve［J］. Journal of Xian Jiaotong University, 1995, 29(7): 16.
［6］ 曹秉刚,史维祥,中野和夫.内流式锥阀液动力及阀芯锥面压强分布的实验研究［J］.西安交通大学学报,1995, 29(7): 713.
CAO Binggang, SHI Weixing, KAZUO Nakano. Experimental study on flow force and pressure distribution on the poppet of a converged flow poppet valve［J］. Journal of Xian Jiaotong University, 1995, 29(7): 713.
［7］ 周盛,徐兵,杨华勇.高速开关阀液动力补偿［J］.机械工程学报,2006,42(5): 58.
ZHOU Sheng, XU Bing, YANG Huayong. Flow force compensation of high speed on/off valve［J］. Chinese Journal of Mechanical Engineering, 2006, 42(5): 58.
［8］ 张德虎,肖跃军,朱建公.提高电磁开关阀响应速度的芯套双动方法研究［J］.液压与气动,2005(9): 2426
ZHANG Dehu, XIAO Yuejun, ZHU Jiangong. Investigation on the method of the movement of spool and cover improving the response speed of highspeed onoff solenoid valve［J］. Chinese Hydraulics & Pneumatics, 2005 (9): 2426
[1] 郑毅, 谢海波, 傅新, 等. Y-sensor中两相层流交界面位置及分子扩散[J]. J4, 2009, 43(10): 1757-1760.
[2] 弓永军 周华 杨华勇. 结构参数对先导式纯水溢流阀性能的影响[J]. J4, 2006, 40(5): 869-873.